Moulder For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 6
112 Results Found
Sort By 
Recently Added Items
2006 Weinig U 500
$34,700
2006 Weinig U 500
2004 Weinig U 1000
$65,000
2004 Weinig U 1000
2007 Kentwood M612HD
Call For Price
2007 Kentwood M612HD
2011 Kentwood M 507EL  Moulder
$24,500

KENTWOOD M 507 EL Compact 5-Head Moulder; (B-R-L-T-B) Head configuration - working dimensions 7" x 5". -- Head sequence: Bottom 7.5 HP, right 10 HP, left 10 HP, top 10 HP and bottom 10 HP motor. -- Spindles : Dia. 1-1/2" with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st bottom head with mechanical digital readouts. Left and top spindles with digi-set mechanical readouts. Pneumatic receding chipbreaker for top spindle. Axial adjustment side heads - 1.57". Axial adjustment top/bottom heads - 0.787". Mechanical digital readout for chipbreaker and pressure element. Electro-mechanical spindle brakes. -- Feed system: Variable speed 20 - 78 FPM, by a 4 HP motor, short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. Minimum length of parts (butt fed) 10.2". 1 HP Powered raise and lower of feed support beam. All top rolls are pneumatically tensioned. -- Infeed/Tables: 2 M (6'6") infeed straightening table, manual table lubricant pump, central lubrication system. Chromed: Table plates and fences. -- Includes: Full sound & safety enclosure, operator tools & manuals, 460v transformer, side pressure roller at infeed mounted to infeed table. -- Recommended Service req. 75 amps, compressed air 90 PSI, dust collection CFM (min) 1,560 CFM, machine weight 7,273 Lbs.

Bob Dykstra
800-374-5009 ext:378
Call

2015 Kentwood M612S  Moulder
Call for Price

Manufacturer specs (to be confirmed): Max capacity: 12" x 6" 6-Heads: Bottom (15 HP), Right (10 HP), Left (15 HP), Top (20 HP), Top (20 HP), Bottom (20 HP) Spindles: 1-13/16" at 6000 RPM, Outboard bearings on horizontal spindles, motorized positioning of heads 3,4,5. LED readouts on chipbreakers and pressure elements. Variable feed speed: 20-80 FPM This machine was never set up to run production at the seller's new facility. Machine has less than 400 hours on it.

Carolina Machinery Sales, Inc
704-288-1904
Call

2010 Kentwood M609S  Moulder
Call for Price

6-Head Moulder: Bottom (10 HP), Right (7.5 HP), Left (7.5 HP), Top (15 HP), Top (15 HP), Bottom (10 HP) 6000 RPM Workpiece capacity: 5.9" x 9" Spindle: 1-1/2" Infeed table 6'6" Variable feed speed: 20-80 FPM, 5 HP Motor Approx weight 10,000 lbs

Carolina Machinery Sales, Inc
704-288-1904
Call

2007 Kentwood M612HD  Moulder
Call for Price

Manufacturer specs (to be confirmed): Max working width 300 mm Min working width 15 mm (0.59") Max working thickness 150 mm (5.9") Min working thickness 10 mm (0.393") Spindle speed 6000 rpm Spindle diameter (all spindles) 1-13/16" Feed speeds 6 to 30 m/min 1st head: 15 hp 2nd head: 15 hp 3rd head:15 hp4th head: 30 hp 5th head: 30 hp 6th head: 20 hp Central lubrication point Sound and safety enclosure around all spindles with lift-up hood and inspection window Push button master controls Wadkin NNV/C Profile Grinder this machine is still connected to power and run a few times a week. Seller no longer needs teh 12" capacity. Moulder includes Grinder!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Leadermac S 23 C  Moulder
Call for Price

Leadermac S23C 5 Head Moulder Serial# 886087

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

2019 Leadermac LMC-630C  Moulder
Call for Price

LEADERMAC 630 C Moulder Feed Through -- 6-Head (B-R-L-T-T-B), working cap. 12" x 6" cap. -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP motor, top 20 HP, top 20 HP and bottom 20 HP motors. -- Spindles: Spindle diameter 1-13/16" with cutterhead speed of 7,200 RPM. Spindles (all) equipped with mechanical digital readouts, digiset readouts for left and top spindles. All horizontal spindles with with hydro-loc outboard bearings. Chipbreaker and pressure elements include mechanical digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure. -- Feed: Feed works: Invertor drive 5 HP feed system with feed speeds of 20 - 82 FPM. -- Includes: Central lubrication, automatic table lubrication, 2 M (6'6") infeed table, chromed tables and fences, swing-away intermediate short piece gearbox opposite left spindle, full width driven adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. (1) Set of full width tooling (spiral carbide tool on first bottom) and grease gun for outboard bearing lock. -- Many additional options available to tailor the machine to your specific requirements. -- Installation and (12) month warranty included on all NEW Machines!

Bob Dykstra
800-374-5009 ext:378
Call

2019 Leadermac LMC-518S  Moulder
Call for Price

LEADERNAC LMC 518 S 5-Head (B-R-L-T-B) LEDERMAC "LMC" Feed Through Moulder, model "SMARTMAC" with a working cap. of 7" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 MM with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st. bottom head with mechanical digital readouts. -- Features: Pneumatic receding chipbreaker for top spindle. Mechanical digital readout for chipbreaker and pressure element. -- Feed system: Variable speed 20 - 85 FPM, by a 4 HP motor; Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates and fences hard chromed, inside fences 32 mm height for side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump. -- Equipped with: Central lubrication system, full sound & safety enclosure, and supplied with operator tools & manuals. -- Includes: (1) Set of cutterheads with reference engraver for first bottom spindle. -- Electrics conform to UL/CSA & CE specifications.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Leadermac LMC-630P 300  Moulder
Call for Price

LEADERMAC 630P "PLATINUM" Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 12" x 6".Specifications: -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40 mm and 2-1/8" also available) with cutterhead speed of 7,200 RPM. -- Outboard bearings on spindles 1,4,5 and 6. Pneumatic locks on outboard bearing supports on top heads. -- All spindles equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Central lubrication; -- Short stock attachment. -- Automatic table lubrication pump. -- Side pressure roller mounted to infeed table. -- Sound enclosure and includes: (1) set of cutter heads.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Leadermac LMC-623P  Moulder
Call for Price

LEADERMAC 623P PLATINUM Feed Through Moulder; 6-Head (B-R-L-T-T-B), "PLATINUM" working cap. 9-1/16" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40mm and 2-1/8" also available) with cutterhead speed of 8,000 RPM. -- All spindles equipped with electronic digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. -- Includes: Central lubrication, short stock attachment, automatic table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. (1) set of heads.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Leadermac LMC-623C  Moulder
Call for Price

LEADERMAC 623C Moulder Feed through -- 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP motor, top 15 HP, top 20 HP, and bottom 15 HP motor. -- Spindle dia. 1-13/16" with cutterhead speed of 6,000 RPM; spindles (all) equipped with mechanical digital readouts, Digiset readouts for left & top spindles. -- Chipbreaker & pressure elements include mechanical digital readouts for accurate positioning; chipbreakers at left & top spindles with pneumatic pressure. -- Feed works: Inverter driven 5 HP feed system with feed speeds fom 20 - 100 FPM. -- Equipped with central lubrication and automatic table lubrication. -- 2 M (6-1/2') infeed table, chromed tables, and fences. -- Swing-away intermediate short piece gearbox opposite left spindle. -- (3) Full width driven rollers in machine bed, lateral side pressure roller at infeed gate. -- Feed jog/inch forward at top spindle and maintenance tools & manuals. -- Includes: (1) Set of full width tooling (spiral carbide tool on first bottom) and corrugated 12/20° heads; operator manual and parts book.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Leadermac LMC-530C  Moulder
Call for Price

LEADERMAC LMC 530C Moulder Feed Through -- 5-Head (B-R-L-T-B), working cap. 12" x 6" cap. -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP motor, top 20 HP and bottom 20 HP motors. -- Spindles: Spindle dia.1-13/16" with cutterhead speed of 7,200 RPM. Spindles (all) equipped with mechanical digital readouts, digiset readouts for left and top spindles. All horizontal spindles with with hydro-loc outboard bearings. Chipbreaker and pressure elements include mechanical digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure. -- Feed works: Invertor drive 5 HP feed system with feed speeds of 20 - 82 FPM. -- Includes: Central lubrication, automatic table lubrication, 2 M (6'6") infeed table, chromed tables and fences, swing-away intermediate short piece gearbox opposite left spindle, full width driven adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. (1) Set of full width tooling (spiral carbide tool on first bottom) and grease gun for outboard bearing lock. -- Many additional options available to tailor the machine to your specific requirements. -- Training and (12) month Warranty provided with each machine sale.

Bob Dykstra
800-374-5009 ext:378
Call

2009 Leadermac LMC 623 Platinum  Moulder
Call for Price

This machine is still under power and ready to be shipped. Specs coming.

Carolina Machinery Sales, Inc
704-288-1904
Call

2003 Northtech 523 P  Moulder
$19,500

NORTHTECH 523 Platinum Feed Through Moulder: 5-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". -- Head Sequence: Bottom 15 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP. -- Spindle Dia. 1-13/16" with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st bottom head with mechanical digital readouts. Left & top spindles with Digi-Set mechanical readouts. Pneumatic receding chipbreaker for top spindle; mechanical digital readout for chipbreaker and pressure element. -- Feed System: Variable speed from 20 - 118 FPM by a 7.5 HP motor. Short stock driven feed roller at right spindle; side pressure roller at infeed mounted to infeed table. -- Includes: Table plates, fences, and chipbreaker shoes hard chromed; inside fences with 65 mm height for heavy side work profiles. Infeed straightening table 2 M (6-1/2'). -- Complete with & Includes: Manual table lubricant pump, central lubrication system, full sound & safety enclosure, and operator tools & manuals..Machine weight 2,900 kgs

Bob Dykstra
800-374-5009 ext:378
Call

1998 Leadermac LMC-923  Moulder
$25,900

LEADERMAC LMC-923 Feed Through Moulder,9-Heads. (B-R-L-R-L-L-L-T-B).Specifications: -- Size range: Width capacity 0.6 - 9.1" (15 - 230 mm ), height capacity 0.4 - 5.9" (10 - 150 mm). -- Head Sequence/Motors: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, right 7.5 HP, left: 7.5 HP, left 7.5 HP, left 7.5 HP, top 7.5 HP and bottom 7.5 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All left spindles with motorized width adjustment with LED display and keypad entry.Feed System: -- Variable feed adjustment of 20 to 82 FPM, 5 HP feed drive motor. (7) Driven bed rollers. -- Feed beam supported at both ends of by heavy duty ridged supports with motorized height adjustment with LED display and keypad entry. -- Infeed straightening table 2M (6'6"), manual waxlit pump for table lubrication. All table plates, pressure elements and fences hard chromed. Complete with: -- Central lubrication, sound enclosure, all interior flex piping for connections inside sound enclosure, and Dust Collection manifold.Features: -- Independently powered infeed rollers. Powered infeed bottom roller. -- Short Stock Feeder on infeed permits short stock with minimum length of 8".Heads are designed so that there is a uniquely short distance between them resulting in a superior moulding finish.Completely gone over and reconditioned. All spindles have new precision bearings installed.Actual model is LMC 923C (Compact Series). -- Also available at same location: FRUILMAC D/E Tenoner (Yr: 2000, 575/3/60) set up as an automatic stacker, cross-transfer, and feeder for this moulder. Great for feeding long runs of short-same-length parts. Price extra is ....$10,000.

Bob Dykstra
800-374-5009 ext:378
Call

2013 Leadermac LMC-623H  Moulder
$49,900

LEADERMAC 623H HYPERMAC Feed Through Moulder;6-Head (B-R-L-T-T-B),working cap. 9-1/16" x 6" capacity. -- Head sequence: Bottom 15 HP, Right 15 HP, Left 20 HP, Top 20 HP, Top 25 HP and Bottom 25 HP motors. -- Spindle dia. 1-13/16" with cutterhead speed of 7,200 RPM. -- Smart-Set 100 control 5.7 HD PLC touch screen electronic spindle positioning for spindles, spindles equipped with mechanical digital readouts. -- Horizontal spindle #5 with with Hydro-Loc outboard bearing. -- Chipbreaker and pressure elements pneumatic; include mechanical digital readouts for accurate positioning. -- Feed: Invertor drive 7.5 HP feed system with feed speeds of 20 - 130 FPM. -- Equipped with: Central lubrication, automatic table lubrication, 1.2 M (4'0") infeed table, chromed tables and fences, (2) short stock attachment; One reversed at infeed to feed short parts down to 12" from hopper feeder. -- (5) Driven adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate. -- Includes: (1) Set of cutterheads, manuals and set up tools.

Bob Dykstra
800-374-5009 ext:378
Call

2004 Leadermac LMC-623SP  Moulder
$29,900

LEADERMAC LMC 623 SP "SPEEDMAC" Moulder Through Feed; 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" cap.Head sequence: Bottom 20 HP, right 15 HP, left 20 HP, top 30 HP, top 25 HP and bottom 50 HP motors. Amp meters on spindle motors # 1,4 and 6.Spindles: Dia. 2-1/8" with cutterhead speed of 6,000 RPM. -- Spindles #2 - 6 with 7,200 RPM spindle speed. -- Spindles (all) equipped with mechanical digital readouts, digi-set readouts for left and top spindles. REC-705B Quik-Trueset system for top head positioning of all top heads. -- REC705B Quik-Trueset system for positioning of left spindle. -- Horizontal spindles with with Hydro-Loc outboard bearings. -- Chipbreaker and pressure elements include mechanical digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure.Jointers: Profile jointers on spindles #2, 3, and 4; air controlled from outside the enclosure. Straight knife jointer on spindle #1.Feed works: 20 HP VFD drive with feed speeds of 20 - 400 FPM (120 MPM).Infeed table: 1.2 M (4'-0") Infeed table, lateral side pressure roller at infeed gate and "solid" chromed tables and fences, (4) full width driven adjustable infeed & outfeed table rollers in machine bed, lateral side pressure roller at infeed.Includes & Features: Central lubrication, automatic table lubrication, swing-away intermediate short piece gearbox opposite left spindle, protection against backlash when splitting.Full width driven adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. Dust collection spyder to fit machine "quick connect".

Bob Dykstra
800-374-5009 ext:378
Call

Mattison 226 4 Head  Moulder
Call for Price

Mattison 226 4 Head Moulder/Planer 12" Serial# 16175 Helical Planer Heads

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Mereen-Johnson 900 Versa  Moulder
Call for Price

Manufactured around 2006 Full load amps: 28 The seller has confirmed that this Mereen Johnson 900 Versa-Moulder was in good working/running condition when pulled from service and it is ready to load.

Carolina Machinery Sales, Inc
704-288-1904
Call

2003 Northtech NT-623H  Moulder
$23,500

NORTHTECH NT-623H, ...Feed Through Moulder: 6-Head (B-R-L-T-T-B), working cap. 9" x 6". -- Head Sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 25 HP, top 20 HP and bottom 15 HP motor. -- Spindle Dia. 1-13/16" with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st bottom head with mechanical digital readouts. Left & top spindles with Digi-Set mechanical readouts. Pneumatic receding chipbreaker for top spindle; mechanical digital readout for chipbreaker and pressure element. -- Feed System: Variable speed from 20 - 118 FPM by a 7.5 HP motor. Short stock driven feed roller at right spindle; side pressure roller at infeed mounted to infeed table. -- Includes: Table plates, fences, and chipbreaker shoes hard chromed; inside fences with 65 mm height for heavy side work profiles. Infeed straightening table 2 M (6-1/2'). -- Complete with & Includes: Manual table lubricant pump, central lubrication system, full sound & safety enclosure, operator tools & manuals.NOTE: Total HP is 113.5. Actual model is "623H". HYPERMAC is a heavy duty series of NORTHTHECH Moulders. - Inspect in EXF's warehouse!

Bob Dykstra
800-374-5009 ext:378
Call

1998 Pao Macc DA  Moulder
$14,990

PAO MACC D.A.1- In-feed Conveyor chain with side guides and sprung upper guide pulleys2- Splitting Station with 7.5 HP Motor3- Adjustable moulding separating station4- Out -feed Conveyor chain with side guides and sprung upper guide pulleys1st.- and 4th. - StationDouble 5/8” neutral para rubber, 110 mm wide chain drive for initial / final thrust. The feed speed is adjustable through a 2 Hp speed variator ( The motor is With Mechanical Brake ) , from 6 to 30 Mt/minuteSprung upper guide pulleys with rubber wheels with bearing for the stability of the moulding.Guides with rubber wheels ( Dia. 70 x 15 mm. ) and bearing. Scale is on the left side of the machine for perfect alignment of the guides. 2nd. StationSplitting station with 7.5 HP motor . The spindle and the tool are inside a safety casing ( with safety micro switch on the door ) according with the tool diameter (180 mm. ).The spindle is 40 mm. in diameter, and is pulley-belt driven. It runs at 7000 R.P.M. - Milling table is made of metal ( aluminum ) and is adjustable ( with slide) according to the tool size ( usually adjustable from 12 to 24 mm.).Digital measuring devices make it possible to accurately adjust the machine each time. 3rd. StationThe moulding separation station consist in adjustable double guides (this movement is assures by a perfect coulisse ) ; and is able to assures perfect stability for the moulding as it split. TECHNICAL FEATURES > DA MODEL LENGTH :3.260 mm.WIDTH :1.200 mm.HEIGHT :1.300 mm.WEIGHT :1.170 KG.Installed power kW. 6.8Conveyor motor power kW. 1.1Splitter motor power kW. 5.5Compressed air pressure 6 Bar (90 PSI)Air requirements Max. 800 nl/Min. SCFM -28Working speed 6-30 Mt/min.Working Level 870 mm.Shaft diameter/revolution 40 mm. - 7.000 RPMTool Diameter Required 200/220 mm.I matriculation: 1.025 Splitter :Shaft diameter and revolution : 40 mm. / 7.000 R.P.M.Maximum tool diameter : Dia. mm. 180

Bob Dykstra
800-374-5009 ext:378
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved