Moulders For Sale
Category
Moulders
105 Results Found
Call for Price
Call for Price
Wadkin K23 5 Head Moulder Largest Motor is 20HP S/N 99/2093 440 Volt 3 Phase Electric Motors
Call for Price
Call for Price
Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls
Call for Price
Six Wadkin moulders available. Have not been run in a few years. Selling all as one package. - (4) 4-Head machines - (2) 6-Head machines
Call for Price
Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls
Call for Price
Call for Price
Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP
Call for Price
WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.
$ 17,900
WADKIN "GA-220" 5-Head Feed Through MoulderSpecifications: -- 5-Head, with 8-5/8" x 4-5/8" cutting capacity (220 mm x 120 mm) -- 40 mm Spindle diameter with cutterhead speed of 6,000 RPM. -- Head sequence: Bottom 10 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP motor. -- 2 HP variable feed speed 19 to 72 FPM, chain drive. -- Currently wired for 460 Volt, 3-Phase power.
Call for Price
7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP
$ 26,500
WADKIN - K 23, ...6-Head Feed Through Moulder Head Configuration --(B-R-L-T-T-B) with working capacity of 9-1/2" x 5".Specifications: -- Head sequence: Bottom 10 HP, Right & Left 20 HP, Top 15 HP, Top 20 HP, Bottom 15 HP motor. -- Spindle dia.: 1-13/16" at 6,000 RPM. -- Mechanical digital readouts on all heads. -- Top heads with MDR for chipbreakers and pressure elements.Equipped with & Features: -- Infeed Table: 2 M (6-1/2'), adjustable table plates for vertical spindles. Includes: Top driven feed rolls , motorized overhead feed beam with dual speed for rise-and-fall, full Cardan feed drive with independent adjustment to feed rollers after top head. -- Side pressure opposite right side head. -- Spindle locks for axial adjustment. --Manual bed lubrication. -- Feed drive: 4 HP Motor, variable feed speed from 20 - 75 FPM.
Call for Price
Call for Price
Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room
Call for Price
Manufacturer Specifications Weinig 5 Head (B-R-L-T-B) P26 S Super Moulder with 9-1/16" x 4-11/16" capacity. Head sequence: - Bottom 10 HP - right & left 10 HP - Top 10 HP and bottom 10 HP Technical Specifications - Grooved bed moulder - Mechanical brakes on all spindles - 460V three phase - Spindle dia. 1-1/2" with cutterhead speed of 6 000 RPM - mechanical digital readouts all spindles - Feed motor 5 HP - variable speed of 20 - 78 FPM
$ 14,200
Weinig Quattromat Q23V 4-Head Through Feed MoulderHead Configuration : (B-R-L-T) Profile or "S4S" Moulder,Specifications: -- 9-1/16" x 4-3/4" cap. -- Spindle sequence: Bottom 5.5 HP, right / left heads 7.5 HP , top 5.5 HP motor. -- Spindles 1-1/2" dia. at 6,000 RPM, mechanical digital readouts for setting accuracy. -- Feed speed of 26 FPM, 1 HP feed drive, direct drive.Equipped with & Features -- 6'- 6" Infeed straightening table with adjustable fence, table inserts for right and left heads. -- Sound insulated safety hood.Technical specifications: -- Machine dimensions 120" x 48" x 62", -- Electrical requirement (95 Amps) at 230 volts, 60cy. 3ph., -- Dust collection 4,500 CFM and Shipping weight 3,500 Lbs.
Call for Price
Call for Price
Weinig Powermat 1500 Moulder 6-head Machine Manufacturer specs (to be confirmed): Operating voltage (single) 460 Volt, 60 Cycles Tool arrangement no. 013 Working width 20 - 230 mm FIRST BOTTOM - Motor 11 KW (15 HP) / 1 13/16" / 6000 rpm Marathon coating for table insert RIGHT VERT - Motor 11 KW (15 HP) / 7000 rpm Diameter 40mm Setting range axial 80mm LEFT VERT - Motor 11 KW (15 HP) / 8000 rpm Vario hood (2 axes) Pressure shoe in front of left, incl. 2 lateral rollers, spring-mounted Setting range of the feed rollers opposite left tool holder Pressure roller from above, pivoting, spring loaded Axial / Radial CNC-controlled adjustment SECOND RIGHT - Motor 11KW (15 HP) Fence lip before and after the right vertical spindle Axial / Radial CNC-controlled adjustment FIRST TOP SPINDLE-MOTOR 22 KW (30HP) - 7000 rpm Vario Hood (2 axes) Split pressure shoe in front of top spindle with Axial / Radial CNC-controlled adjustment SECOND TOP - Motor 18.5 KW (25HP)/ 7000 rpm Split pressure shoe in front of top spindle Axial / Radial CNC-controlled adjustment Top spindle prepared cassette system. LAST BOTTOM - Motor 22 KW (30 HP) / 7000 rpm Adjustment range axial & radial FEED SYSTEM - Motor 7 KW (9.5 HP) / 5 - 40 m/min. Feed roller in front of 1st bottom, pneumatic up-down Electrical up-down adjustment of the feed bar Two interior lights in the safety hood Remote Lock out / Tag out Lateral pressure roller at the infeed table, spring-mounted Guiding fence after the left vertical spindle 6 mm thick PowerCom Plus Improved sound insulation MACHINE CHANGE: 06.10.2019 - Please be aware that the VarioHood assembly on the 1st Top Spindle was moved to the 2nd Top Spindle position. The 2nd Top Standard Hood was moved to the 1st Top Spindle Position. This move will impact the parts relating to the Aspiration Hood, ChipBreaker and Pressure Shoe elements. Please use caution when looking up replacement parts. This machine change was performed by WUSA technicians
$ 16,900
WEINIG Profimat 23 E 5-Head Moulder5-Head (B-R-L-T-B) with working dimensions 9-1/16" x 4-3/4". -- Spindle sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- All motors with mechanical spindle brakes. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM. -- Equipped with Mechanical digital readouts for all spindles, and Digiset readouts for left and top spindles. -- Feed motor 4 HP with speed of 20 - 76 FPM. -- Table inserts for right & left spindles for the running of narrow stock; outfeed table roller. -- Infeed table 2 M (6-1/2') -- Manual Waxilit pump, central lubrication from front of the machine. -- Includes BEN-200 Mahros Horizontal Roller Feeder for moulder infeed, as shown in photos.Seller is also including Heads and Knives with this machine.