MVM Knife Grinder For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
3 Results Found
Sort By 
STANDARD LISTINGS
2019 MVM BM 850  Knife Grinder
$8,880

MVM BM 850 Straight Knife Grinder;Grinder for straight knives up to a 33" in length ideal for chipper, shaving and planer knives.Specifications: -- Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0° to 90°and grinding head tilts +5° to -30°. -- Chuck clearence to wheel 1.2" and chuck width is 3.5".Features: -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm Vitrified cup wheel, (1) set of blade clamps and (1) set of step blocks for stacking up to (4) planer knives, (1/8" x 40° back clearance). Option available: &#9679 2-Speed carriage travel motor for an additional ...$550.00 &#9679 Magnetic Chuck MVM-BM-0AMBM00901 ...$2,500 &#9679 T-Slot Device for use with magnetic chucks MVM-2579222110 ...$ 990(Allows clamping + stack grinding knives up to 850 mm) &#9679 Variable Carriage Speed (4 to 11 m/Min) MVM-ZX-0001001 ...$1,600 &#9679 2-Speed Carriage Drive Motor MVM-BM-OLXX001000 ...$ 550 (13 & 6.5 m/Min) &#9679 Step Blocks for stacking up to (4) planer knives MVM-AF2500-210XX ...$ 43 ea. (must specify knife thickness and back angle) &#9679 Knife Extension Resting Blocks MVM-BM-2579114100 ...$165 ea (Allow knives that are wider than the chuckto be referenced from the back) &#9679 Double Sided Tree Chipper knife fixture ...$ 850 (Customer must specify knife specs and hole spacing)Single Phase and High Voltage Power Options: &#9679 3 HP Rotary Phase Converter (no loss in HP) RPC-3 ...$ 875 &#9679 480V, 3-Ph, Factory Configuration MVM-SV-1002 ...$ 875 (Or any other voltage over 400 V – factory only) &#9679 5-Gallon Soluble Oil Grinding Coolant CS-SO-5 ...$ 199(Mixes 30:1 with water so makes 150 gallons of coolant)Recommended Grinding Wheels:5" Borazon Wheel 11A2 120 grit C10005-06 ...$ 1755" Diamond Wheel 11A2 180 grit C10004-06 ...$ 1555" Diamond Wheel 11A2 320 grit C10034-02 ...$ 2205" Vitrified Cup Wheel 46 grit MVM-CUP-5-2-16-46G ...$ 285" Vitrified Cup Wheel 36 grit MVM-CUP-5-2-16 ...$ 28 NOTE: Additional grinding wheel grit available.

Bob Dykstra
800-374-5009 ext:378
Call

2019 MVM ZX 1000  Knife Grinder
$13,500

MVM with 40” mechanical chuck -- Grinder for straight knives up to a 39" in length ideal for shaving, chipper and planer knives. -- Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0°to 90° and grinding head tilts +5°to -30°. -- Chuck clearence to wheel 1.2" and chuck width is 3.9". -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm vitrified cup wheel for grinding and (1) set of Step blocks for stacking up to four planer knives at one grind. -- Warranty included on parts.ZX1000 Optional Accessories40” Magnetic Chuck option on ZX1000 MVM-ZX-0000900 $ 2,500 48” Magnetic Chuck option on ZX1230 MVM-ZX-0000901 $ 3,000(With tilling lever) T-Slot Device Mounts onto Magnetic Chuck $ 990 (Allows clamping + stack grinding knives up to 34”) Upgrade to 3.5HP & 6” Wheel (20mm bore) MVM-ZX-0000501 $ 880 Variable Carriage Speed (1 to 11 m/min) MVM-ZX-0001001 $ 1,600(Includes upgrade to metal control box with potentiometer) 400mm Super Hi-Power Mag Plate MVM-A-MP400 $ 1,750 (For grinding carbide inserts) Stops with sensors to limit the carriage travel MVM-ZX-000500 $ 660 (Requires external coolant tank and pump option) Step Blocks for stacking up to 4 planer knives MVM-AF2500-210XX $ 43 ea (Must specify knife thickness and back angle) Knife Extension resting blocks MVM-ZX-2579231600 $ 165 (Allow knives that are wider than the chuck to be referenced from the back) Rotary cutting edge references MVM-ZX-2579243000 $ 140 (Available on magnetic chuck only) External Coolant Tank and Pump XXX-ZX-000200 $ 1,200 (Standard machine uses the carriage bed as a coolant tank) 220v, single phase, Rotary Phase Converter (no loss in HP) RPC-3 $ 875 480v, 3ph, factory configuration $ 875 (or any voltage over 400

Bob Dykstra
800-374-5009 ext:378
Call

2019 MVM PX 1350  Knife Grinder
$29,900

MVM PX 1350 Knife Grinder;For straight knives up to a 53-1/2" (1,360 mm) in length for planer, veneer, paper, and chipper knives.Specifications: -- Stepless variable speed carriage with travel speed up to 40 FPM. -- Manual-Automatic wheel down feed can be set per pass and total down-feed. -- 3.5 HP Grinding motor with 16 mm bore; grinding wheel at 2,800 RPM. -- Grinding chuck tiltable from 0° to 100°; chuck clearence to wheel is 4.3" (100 mm) and chuck width is 4.7" (120 mm). -- Heavy Duty coolant system with static magnetic filter. Equipped with: -- 200 mm (8") Segmented holder with (6) segments; mechanical T-groove chuck for stack grinding of knives with step blocks; covered head travel guides; head travel on hardened & ground replaceable wear strips. -- Includes: (1) 125 mm Vitrified cup wheel. -- Additional longer units available with grinding lengths of : 80" (2,000 mm), 120" (3,000 mm) and 178" (4,500 mm).PX Optional AccessoriesElectro Magnetic Chuck, with T-Slot (PX1000 only) MVM-PX-00009 Upgrade to 6HP Grinding Motor MVM-PX-00013 200 mm Super Hi-Power Mag Plate for grinding carbide inserts MVM-A-MP200 400 mm Super Hi-Powered Mag Plate for grinding carbide inserts MVM-A-MP400 600 mm Super Hi-Powered Mag Plate for grinding carbide inserts MVM-A-MP600 318 mm Mechanical Plate for grinding alloy inserts with pinholes MVM-GM-INS-004 1000 mm offset mechanical clamping device for alloy inserts And step grinding inserts where the clamping area can’t be ground(i.e. Great-Loc®) (Requires 5” wheel, 20mm bore) Clamping Device for disposable Terminus, Weinig or Kanefusa MVM-2579222-020 Specialty blades Clamping Device for disposable Tersa, Centrofix or Sinus blades MVM 2579222150 mm Segment Holding Ring (upgrade to 6HP highly recommended) MVM-GM-332 (Allows use of grinding Segments instead of cup wheels) Step Blocks for stacking up to (4) planer knives MVM-AF2500-210XX

Bob Dykstra
800-374-5009 ext:378
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved