• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
5 Results Found for Knife Grinder Viewing 1 - 5 of 5 results
STANDARD LISTINGS
MVM BM 850 --Grinder for straight knives up to a 33" in length ideal for chipper, shaving and planer knives. Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0°to 90°and grinding head tilts +5°to -30°. -- Chuck clearence to wheel 1.2"and chuck width is 3.5". -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm vitrified cup wheel, (1) set of blade clamps and (1) set of step blocks for stacking up to (4) planer knives, (1/8" x 40° back clearence). -- Additional grinding wheel grit available.
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
MVM - GM 1000, ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Manual wheel down feed adjustable in .01 mm increments. Grinding Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Tilts from -5° to 90° with scale from -5° to +5°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Flood coolant system with two lines for both directions.Chuck: Newly Rebuilt Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides, tiltable -5° to 95°. .NOTE: Machine is in EX-FACTORY's "Zeeland, MI" Warehouse and Repair Facility. - Thoroughly checked out and ready to ship!
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
MVM PX 1350 Grinder for straight knives up to a 53-1/2" (1,360 mm) in length for planer, veneer, paper, and chipper knives; stepless variable speed carriage with travel speed up to 40 FPM -- Manual-Automatic wheel down feed can be set per pass and total down-feed. -- 3.5 HP Grinding motor with 16 mm bore; grinding wheel at 2,800 RPM. -- Grinding chuck tiltable from 0° to 100°; chuck clearence to wheel is 4.3" (100 mm) and chuck width is 4.7" (120 mm). -- Heavy Duty coolant system with static magnetic filter. -- Equipped with: 200 mm (8") Segmented holder with (6) segments; mechanical T-groove chuck for stack grinding of knives with step blocks; covered head travel guides; head travel on hardened & ground replaceable wear strips. -- Includes: (1) 125 mm Vitrified cup wheel, -- Additional longer units available with grinding lengths of : 80" (2,000 mm), 120" (3,000 mm) and 178" (4,500 mm) - -- PX Optional AccessoriesElectro Magnetic Chuck, with T-Slot (PX1000 only) MVM-PX-00009 $3,000Upgrade to 6HP Grinding Motor MVM-PX-00013 $2,750200mm Super Hi-Power Mag Plate for grinding carbide inserts MVM-A-MP200 $ 1,200400mm Super Hi-Powered Mag Plate for grinding carbide inserts MVM-A-MP400 $1,750600mm Super Hi-Powered Mag Plate for grinding carbide inserts MVM-A-MP600 $2,250318mm Mechanical Plate for grinding alloy inserts with pinholes MVM-GM-INS-004 $2,2001000mm offset mechanical clamping device for alloy inserts $2,800And step grinding inserts where the clamping area can’t be ground(i.e. Great-Loc®) (Requires 5” wheel, 20mm bore) Clamping Device for disposable Terminus, Weinig or Kanefusa MVM-2579222-020 $2,420 -- Specialty blades -- Clamping Device for disposable Tersa, Centrofix or Sinus blades MVM 2579222 $2,200150mm Segment Holding Ring (upgrade to 6HP highly recommended) MVM-GM-332 $880(Allows use of grinding Segments instead of cup wheels) Step Blocks for stacking up to 4 planer knives MVM-AF2500-210XX $ 43 ea
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
MVM with 40” mechanical chuck -- Grinder for straight knives up to a 39" in length ideal for shaving, chipper and planer knives. -- Automatic head travel with travel speed of 33 FPM. -- Automatic wheel down feed can be set for per pass and total downfeed. -- 2 HP Grinding motor with 16 mm spindle/shaft. -- Grinding chuck tiltable 0°to 90° and grinding head tilts +5°to -30°. -- Chuck clearence to wheel 1.2" and chuck width is 3.9". -- Heavy duty coolant system with static magnetic filter. -- Mechanical T-groove chuck for stack grinding of knives with step blocks. -- Head travels on hardened and ground replaceable wear strips and head travel guides are covered. -- Includes: (1) 125 mm vitrified cup wheel for grinding and (1) set of Step blocks for stacking up to four planer knives at one grind. -- Warranty included on parts.ZX1000 Optional Accessories40” Magnetic Chuck option on ZX1000 MVM-ZX-0000900 $ 2,500 48” Magnetic Chuck option on ZX1230 MVM-ZX-0000901 $ 3,000(With tilling lever) T-Slot Device Mounts onto Magnetic Chuck $ 990 (Allows clamping + stack grinding knives up to 34”) Upgrade to 3.5HP & 6” Wheel (20mm bore) MVM-ZX-0000501 $ 880 Variable Carriage Speed (1 to 11 m/min) MVM-ZX-0001001 $ 1,600(Includes upgrade to metal control box with potentiometer) 400mm Super Hi-Power Mag Plate MVM-A-MP400 $ 1,750 (For grinding carbide inserts) Stops with sensors to limit the carriage travel MVM-ZX-000500 $ 660 (Requires external coolant tank and pump option) Step Blocks for stacking up to 4 planer knives MVM-AF2500-210XX $ 43 ea (Must specify knife thickness and back angle) Knife Extension resting blocks MVM-ZX-2579231600 $ 165 (Allow knives that are wider than the chuck to be referenced from the back) Rotary cutting edge references MVM-ZX-2579243000 $ 140 (Available on magnetic chuck only) External Coolant Tank and Pump XXX-ZX-000200 $ 1,200 (Standard machine uses the carriage bed as a coolant tank) 220v, single phase, Rotary Phase Converter (no loss in HP) RPC-3 $ 875 480v, 3ph, factory configuration $ 875 (or any voltage over 400
Equipment Location:NORTHEAST
Bob Dykstra
800-374-5009 ext:378
MVM - ZX 1000, ...Straight Knife Grinder.For straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down feed.Grinding Motor: -- 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. -- Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood coolant system with static magnetic filter. Chuck: Magnetic T-groove chuck to stack grinding of knives with step blocks. Head travels on hardened and ground replaceable wear strips and head travel guides.
Equipment Location:SOUTHEAST
Bob Dykstra
800-374-5009 ext:378