• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
5 Results Found for Router Viewing 1 - 5 of 5 results
RECENTLY ADDED
STANDARD LISTINGS
LIMTECH CENTAURUS 510 Flat Table CNC Router with Tool Changer and Boring:5' x 10' Capacity, great for Nested Base Manufacturing or just about any type of 3-Axis work. Very solid, full function CNC Router.Axes travel range & feed speed: -- X-Axis 61" (1,550 mm), Y-axis with 121" (3,073 mm) and Z-axis 9.8" (250 mm). -- Worktable: 61" (1,550 mm) x 121" (3,073 mm); includes (3) pop-up stops to aid in panel positioning, and manual valve controlled 6-zone special high flow vacuum table system. -- X- & Y-Axis speeds are 1,575 IPM with Ball screw and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- Servo drives power the axes movement,Machine Bed/Base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1" (25 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool gantry & bridge movement by 1" (25 mm) helical rack & pinion using Planetary gearbox. the vertical Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air Cooled HSD Router spindle with ISO 30 Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the HSD spindle from the 8-Position, rack style tool station mounted on the end of the machine bed. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.Boring unit: -- HSD (9) spindle vertical drilling unitCNC Control & Operator Interface: -- The Syntec INDUSTRIAL CONTROL System gives the operator an easy to use interface and the flexibility to customize to user specifications; is Network-ready via Ethernet and USB flash drive. -- Features: Canned cycle, tool length-diameter compensation, work coordinates offsets, spindle feed rate overrides, program size up to flash drive size, DNC or drip feed operation, and unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; (8) ISO 30 tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- 235 CFM Dry Vacuum Pump; 15 HP, two stage high capacity vacuum pump with filter and relief valve. -- Other Features: Central lubrication system, and Automatic homing operation and USB-Ethernet ports, . -- Machine weighs approx. 6,000 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 230 Volts, 60 Cy, 3-Phase at 50 amps.Special Price on this "stock machine" includes: Installation & Training by Factory Technician, and (1) Year Parts & Labor Warranty!
Equipment Location:SOUTHEAST
Norm Schust
800-374-5009 ext:445
LIMTECH ORION-510 Flat Table CNC Router with Tool Changer & Boring:5' x 10' Capacity, great for "Nested Base Manufacturing" or just about any type of 3-Axis work.Axes travel range & feed speed: -- X-Axis 61" (1,550 mm), Y-axis with 121" (3,073 mm) and Z-axis 11.8" (300 mm). -- Working Table: 61" (1,550 mm) x 121" (3,073 mm); includes (3) pop-up stops to aid in panel positioning & a manual valve controlled 6-zone special high flow vacuum table system. -- X- & Y-Axis speeds are 2,165 IPM and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- DELTA Servo drive powers the axes movement.Machine bed/base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1.2" (30 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool gantry & bridge movement by 1" (25 mm) rack & pinion; the vertical Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air cooled "HSD" Router spindle with: ISO 30 Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the "HSD" spindle by (1) 8-position, rack style tool station mounted on the end of the machine bed. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.Drilling/Boring: -- (1) 9-vertical drills spindle head in L-shape configuration for 32 mm contstruction hole & line boring.CNC Control & Operator Interface: -- The "FANUC" INDUSTRY CONTROL System, gives the operator an easy to use interface and the flexibility to customize to user specifications; is Network-ready via Ethernet and with USB flash drive. -- Features: Canned cycle, Tool length-diameter compensation, Work Coordinates-Offsets, Spindle-Feed rate overrides, Program size up to flash drive size, DNC or drip feed operation and Unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; (8) ISO 30 tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- 235 CFM Dry Vacuum Pump; 8 kW (11.5 HP) Vacuum Pump with ON/OFF pre-plumbed to control pane. -- Other Features: Machine Central lubrication, Safety light beams and Automatic homing operation. -- Machine weighs approx. 8,000 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 220 Volts, 60 Cy, 3-Phase.Special Price on this "stock machine" includes: Freight to Customers door (throughout the lower 48 States), Installation & Training by Factory Technician, and (1) Year Parts & Labor Warranty.
Equipment Location:WEST COAST
Norm Schust
800-374-5009 ext:445
LIMTECH ORION-512 Flat Table CNC Router with Tool Changer & Boring:5' x 12' Capacity, great for "Nested Base Manufacturing" or just about any type of 3-Axis work.Axes travel range & feed speed: -- X-Axis 61" (1,550 mm), Y-axis with 145" (3,700 mm) and Z-axis 11.8" (300 mm). -- Working Table: 61" (1,550 mm) x 145" (3,700 mm); includes (3) pop-up stops to aid in panel positioning & a manual valve controlled 6-zone special high flow vacuum table system. -- X- & Y-Axis speeds are 2,165 IPM and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- DELTA Servo Drive powers the axes movement.Machine bed/base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1.2" (30 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool gantry & bridge movement by 1" (25 mm) rack & pinion; the vertical Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air cooled "HSD" Router spindle with: ISO 30 Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the "HSD" spindle by (1) 8-position, rack style tool station mounted on the end of the machine bed. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.Drilling/Boring: -- (1) Vertical 9-head spindle drills in L-shape configuration for 32 mm contstruction hole & line boring.CNC Control & Operator Interface: -- The "FANUC" INDUSTRY CONTROL System provides the operator an easy to use interface and the flexibility to customize to user specifications; Network-ready via Ethernet and USB flash drive. -- Features: Canned cycle, tool length diameter compensation, work coordinates-offsets, spindle feed rate overrides, program size up to flash drive size, DNC or drip feed operation and unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; (8) ISO 30 tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- 235 CFM Dry Vacuum Pump; 8 kW (11.5 HP) Vacuum Pump with ON/OFF pre-plumbed to control panel. -- Other Features: Machine Central lubrication, safety light beams and automatic homing operation. -- Machine weighs approx. 8,500 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 220 Volts, 60 Cy, 3-Phase.Special Price on this "machine" includes: Freight to Customers door (throughout the lower 48 States), Installation & Training by Factory Technician, and (1) Year Parts & Labor Warranty.
Equipment Location:WEST COAST
Norm Schust
800-374-5009 ext:445
LIMTECH PEGASUS 44 Flat Table CNC Router with Tool Changer and Boring:4' x 4' Capacity, great for any type of 3-Axis work. Very solid, full function CNC Router.Axes travel range & feed speed: -- X-Axis 48" (1,219 mm), Y-axis with 48" (1,219 mm) and Z-axis 9.8" (250 mm). -- Worktable: special high flow vacuum table system. -- X- & Y-Axis speeds are 1,575 IPM with Ball screw and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- Servo drives power the axes movement,Machine Bed/Base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1" (25 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool bridge movement by 1" (25 mm) helical rack & pinion using Planetary gearbox. The vertical and Y Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air Cooled HSD Router spindle with ISO 30 Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the HSD spindle from the 10-Position ride along tool station mounted on the front of the spindle. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.Boring & Saw unit: -- 11 spindle boring unit with (9) vertical and (2) horizontal drills with a (2) blade saw unit (1) for the X direction and (1) for the Y direction.CNC Control & Operator Interface: -- The INTEK INDUSTRIAL CONTROL System gives the operator an easy to use interface and the flexibility to customize to user specifications; is Network-ready via Ethernet and USB flash drive. -- Features: Canned cycle, tool length-diameter compensation, work coordinates offsets, spindle feed rate overrides, program size up to flash drive size, DNC or drip feed operation, and unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; assorted ISO 30 tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- Vacuum Pump; (1) 10 HP, two stage high capacity vacuum pump with filter and relief valve. -- Other Features: Central lubrication system, and Automatic homing operation and USB-Ethernet ports. -- Machine weighs approx. 5,000 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 230 Volts, 60 Cy, 3-Phase at 50 amps.
Equipment Location:MID ATLANTIC
Norm Schust
800-374-5009 ext:445
LIMTECH CENTAURUS 4 X 4 Flat Table CNC Router with Tool Changer:4' x 4' Capacity, great for any type of 3-Axis work. Very solid, full function CNC Router.Axes travel range & feed speed: -- X-Axis 48" (1,219 mm), Y-axis with 48" (1,219 mm) and Z-axis 9.8" (250 mm). -- Worktable: special high flow vacuum table system. -- X- & Y-Axis speeds are 1,575 IPM with Ball screw and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- Servo drives power the axes movement,Machine Bed/Base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1" (25 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool gantry & bridge movement by 1" (25 mm) helical rack & pinion using Planetary gearbox. The vertical Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air Cooled HSD Router spindle with ISO 30 Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the HSD spindle from the 8-Position, rack style tool station mounted on the end of the machine bed. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.CNC Control & Operator Interface: -- The Syntec INDUSTRIAL CONTROL System gives the operator an easy to use interface and the flexibility to customize to user specifications; is Network-ready via Ethernet and USB flash drive. -- Features: Canned cycle, tool length-diameter compensation, work coordinates offsets, spindle feed rate overrides, program size up to flash drive size, DNC or drip feed operation, and unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; assorted ISO 30 tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- Vacuum Pump; 110 HP, two stage high capacity vacuum pump with filter and relief valve. -- Other Features: Central lubrication system, and Automatic homing operation and USB-Ethernet ports, . -- Machine weighs approx. 4,000 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 230 Volts, 60 Cy, 3-Phase at 50 amps.
Equipment Location:MID ATLANTIC
Norm Schust
800-374-5009 ext:445