Woodworking Equipment For Sale
1446 Results Found
CAM-WOOD SM-156A Feed Through Moulder;6-Head (B-R-L-T-T-B), working cap. 6" x 4". -- Head sequence: Bottom 7.5 HP, right 5.5 HP, left 5.5 HP, top 10 top, top 7.5 HP and bottom 7.5 HP motor. -- Spindle diameter 40 mm with cutterhead speed of 6,000 RPM; spindles equipped with mechanical readouts for axial and radial adjustments. -- 4 HP Feed Motor variable speed 16- 65 FPM; carden drive system. -- 1.2 M (4'0") Infeed table with lateral side pressure roller mounted at table infeed. Manual table lubrication pump. -- Includes: Short stock attachment, set up tools and manuals. -- Dust collection Min. 3,500 CFM -- Air requirement 90 psi. -- 150 AMPs. at 220 V. -- Machine dimensions , length & width 137” long, x 54” Width x 68” High Note: Brand New with Warranty!
CAM-WOOD SET-128 DET 8 Heads Double End Tenoner -- 4 heads each side, scoring, saw/hogging, Universal shape, Universal shapeCapacity: -- Max. 144" (3,650 mm) working capacity, min. 12"; max. 3" opening thickness, -- 59" (1500 mm) load area in front of hold-downs. -- Dual-post machine, single "dual-track" base, right side fixed, left side movable. -- Motorized opening with LED indicator.Each side equipped -- First unit: Bottom scoring unit, 3 HP - 3,600 RPM motor, 1" dia. arbor & up to 12" blade. -- Second unit:Top trim/hogging head, 10 HP - 3,600 RPM motor, 1" dia. arbor for up to 10" blade. -- Third unit: Universal shaping head, 10 HP - 7,200 RPM motor, 5-7/8" (150 mm) long & 1" dia. arbor, 8" max. dia. cutter-head. -- Variable feed speed from 20 - 66 FPM, 2 HP motor, steel feed chains with plastic anti-slip pads and dogs at 6" center. -- Spring loaded overhead hold-down beams w/endless belts. -- Separate electrical control cabinet with operator controls.Floor space requirement 233" wide X 173" long X 72" highOptions Available: -- Pneumatic jump control on scoring or shaping unit. -- Cross transfer -- Upper feed magazine
CAM-WOOD SET-86DET 6 Heads Double End Tenoner -- Suitable for mass production of woodworking task for double end cutting, tenoning, grooving, profiling and sanding -- Saw, Shaper, Shaper: Total 3 stations at both sides. -- It is a powerful machine great for heavy-duty production.Capacity: -- The specially designed numeric controller allows quick setting of sizes, for the tolerance within 0.004”. -- Variable speed, through feed, wide rubber pad, spring loaded dogs at 8" center conveyor for the best finish selections. -- Heavy-duty pressure rolls at top of wide width conveyor to hold the material tight to prevent sliding during the cutting process. -- Shaper head can be moved up & down, forward & backward. -- Max. 96" working capacity, min. 12"; max. 3 1/8" opening, 24" load area in front of hold-downs. -- .The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 20~82 FPM. -- Motorized opening with LED indicator.Each side equipped -- Scoring saw unit , 2 HP - 3,600 RPM motor, 1" dia. arbor & up to 8" blade -- Trim saw tiltable unit, 3 HP , 3,600 RPM motor, 1" arbor and up to 10" blade. -- Shape/coping head unit. , 7.5 HP - 4,500-7,000 RPM motor, 1 1/4" or 40 mm dia. arbor for up to 8" cutter head. -- Variable feed speed from 20 - 66 FPM, 1 HP motor, steel feed chains with plastic anti-slip pads and dogs at 6" center. -- Spring loaded overhead hold-down beams w/endless belts. -- Separate electrical control cabinet with operator controls.Options Available: -- Hopper feed magazine -- Pneumatic jump control on scoring or shaping unit. -- Sound enclosure -- Electric motor brake -- Jump shaper -- Tilting shaperFloor space : 14' X 9' X 5", weight 10,500 lbs
CAM-WOOD CS-18AAT-16/EM-300 PUSHER TYPE CUTOFF SAW WITH 16' INFEED CAPACITY, CRAYON MARKING - Arranged to remove defects from Clear.Width & Thickness Capacity: Up to 1-1/2" x 12-1/2"Features: -- 18" Automatic Cut Off Saw equipped with automatic pusher for increased automation and efficiency -- 16' infeed table -- Works as an automatic pusher for defect removal -- PLC controlled automatic pusher device driven by servo motor at feed speeds up to 200 FPMAuto Pusher: -- Operator places crayon marks at the leading and trailing ends of a defect or waste zone -- Pusher moves the board to the first crayon marked defect, automatically completes the cutting cycle, and continues to position and chop the board at each crayon mark, thereby removing all waste zones. When the board is finished, the pusher returns to its starting position and starts on the next board -- Super Pusher travels up to 200 FPM -- Sealed, long-life ball bearings -- Precision ground cast iron table with heavy metal cabinet stands -- Easy to operate in all operations -- Saw blade comes up from beneath the table and returns after cutting for safe operation -- Totally enclosed blade guard prevents danger during cutting cycle -- Includes magnetic starters with overload protectionCutting Specifications: -- (45) Strokes/Min -- 18” Saw Blade Diameter with 1” Saw Arbor -- 10 HP Arbor Motor -- 3,200 RPM Blade Speed -- 90 PSI Compressed Air requirement with 1" Inlet -- (1) 4” Dust Hood -- Machine Size (W x L), 30" X 28-1/2" -- Automatic Transfer between Defect Saw and End MatcherCAM-WOOD EM-300 END MATCHER WITH THE FOLLOWING SPECIFICATIONS: -- Performs tongue and groove at both ends of random length boards -- Includes powered conveyors for infeed and outfeed -- Air operated hold downs keep material firmly in place during the machining process -- Cutter heads move in and out while cutting a tongue on the trailing end of one part and a groove on the leading end of the following pieceFeatures: -- PLC controls combined with touch-screen for maximum convenience of operation -- Each cutter head is powered by a separate motor driving each spindle at 7,500 RPM -- Accepts unlimited wood lengths via an automated conveyor for infeed and outfeed -- Cutterhead travel thru the wood is controlled by a frequency inverter that permits speed changes to suit various conditions. -- Pressure plates are actuated by air cylinders -- Hard chrome-plated table for maximum wear resistance -- Table rollers increase feeding smoothness -- Powered infeed roller conveyor is driven by a 1 HP motor -- 3,400 mm infeed roller conveyor and 2,200 mm outfeed conveyor tables are included -- Fully enclosed chip guards -- Air-operated clamp holds stock firmly in place. After work piece is clamped, cutter heads move in as they perform the shaping -- Spindles are precision constructed to cut accurately and smoothly -- Spindle height adjustment is displayed on a dial gauge -- CAM-WOOD’S 2-spindle design accommodates
CAM-WOOD XL-600 Top & Bottom Planer with STRAIGHT KNIFE HEADS WITH HSS KNIVES OR OPTIONAL SPRIAL CARBIDE INSERT CUTTERHEADS:Spiral Heads with Carbide Insert Knives, add ...$3,470.24" Capacity Planer for accurate and powerful two-sided planing in one pass.Specifications: -- 24” Max. Planning Width 6-5/8” Max. Planning Thickness -- 1/4”Max. Cutting Depth -- 12” Min. Planning Length -- 10 to 70 FPM Feed Speeds (Variable) -- 4,200 RPM Cutter Head Speed -- 4-Knife Cutterheads -- 30 HP Top Head Motor -- 15 HP Bottom Head Motor -- 3 HP Feed Motor -- 1 HP Elevation Motor -- Table Size (L x W) 93" x 24" -- Net weight 6,930 Lbs and Gross weight 7,700 LbsEquipped with: -- Standard equipment includes Automatic Thickness Controller for quick, accurate thickness adjustments. -- Top and bottom straight knife cutter heads with HSS knives for accurate and powerful two-sided planing in a single pass. -- The Planer’s table surface is precision ground then chrome-plated and polished to a mirror finish; wear resistance, easy to clean and maintain.Feed System: -- Heavy-duty upper feed carpet (conveyor) with spring-loaded steel “fingers” holds stock firmly against the Planer’s table; prevents stock splitting while providing positive feed and smooth finish for rough and finish planing. The conveyor (carpet) is fitted with numerous pressure pins, or fingers, which firmly holds and stabilizes stock during the planing process. Fingers apply moderate pressure to the stock and provides accurate planing while preventing wide cupped boards from splitting and feeding problems while planing narrow material. -- (4) Powered feed rolls are driven via a gearbox linked to heavy-duty chains and sprockets; provides smooth even feeding during rough and finish planing. -- Stepless variable speed control for smooth adjustment of feed speed depending on the material hardness, depth of cut & width; allows for the best finish and feed speed. -- Anti-kickback device provides safety and is designed to work in unison with a conveyor stop. Safeguards mechanical parts in case of overload situations.Features: -- The heavy-duty CAST IRON frame supports the worktable, helps dampen vibration, and ensures years of dependable service. -- Powerful industrial motors for maximum cutting capacity. -- All precision sealed-for-life bearings for long and durable use. -- A built in cutterhead stand is designed for convenient knife changing at the bottom cutterhead. -- Changing knives on the upper cutter head only requires removal of the upper dust chute. -- Setup time is minimized to set cutter head height using the auto material thickness device. -- The top and bottom cutter heads are precision balanced to provide smooth, chatter-free planing regardless of the feed rate or hardness of planed material. -- 1/2 HP Motor provides quick and accurate top head thickness adjustments. Optional: Spiral Insert Cutterheads allow fast, accurate ins
CAM-WOOD MODEL SFJ-3800-205-FM-FAH HIGH SPEED, LONG BOARD, HORIZONTAL JOINT, FINGER JOINTER: -- Double Chain & Slat Type Shaper Section designed for long incoming boards -- Manual infeed; Slat Bed Feed Chain runs at up to 75 FPM; lugs on 30" centers. Slat Bed powered with a 15 HP gear motor with 1:40 gear ratio. -- Table Transfer Roll Motors, even ends boards to the Right and Left Shaper Fences: powered by (2) 7-1/2 HP motors -- Power raising and lowering of the holddown assemblies on both Shaper Sections; Powered with (2) 2 HP motors -- (1) Pair Scoring Saws with 2 HP motors, 50mm arbor, 2,850 RPM, scoring blade size of 7” x 50 tooth, (4) Blades included -- (1) Pair Trim Saws with 10 HP motors, 50mm arbor, 4,275 RPM, trim saw blade size of 10” x 100 tooth. (2) Blades included -- (1) Pair Vertical Hogging Shaper Spindles with 10 HP motors, 50mm arbor, 4,375 RPM, hogging blade size of 9.4” x 50 tooth. (2) Blades included -- (1) Pair Vertical Finish Shaper Spindles with 20 HP motors, 50mm diameter spindles, 5,300 RPM. For -- 50mm bore x 160mm dia. cutterheads; finger length of 1.122”; cutterheads and knife profile to buyer’s specification -- Extrusion Type Glue Application System for PVAC Glues; mounted on Right Side Shaper Section. Includes glue pump, valves, and glue injection thru the applicator comb machined to buyer's specifications. -- Optional APQUIP Glue System available at extra cost -- Optional Glue Equipment available for Loctite HB X Glue at extra price -- Deduct $5,200 if provided without a Glue SystemSCC-20 TRANSFER CONEYOR -- Conveyor between Shaper Section to the Press Section -- Working dimension: from 1” to 8” wide x 12” to 12’-6” long -- Speed 230 FPM -- Powered by (1) 3HP HSC-65 HIGH-SPEED PRE-PRESS ASSEMBLY SECTION -- Working dimensions: 1” to 8” wide x 3/4” to 2-1/4” high x up to 21’ long -- (2) 5 HP motors drive the double flat top chains -- Feed speeds from 32 to 295 FPM -- Includes (1) 15 HP Frequency Converter to power the feed chain motors at speeds determined by incoming boards lengths NFJ-1500 50’ HEAVY DUTY AUTOMATIC ASSEMBLY PRESS -- Working dimension: 1” to 8” wide x 3/4” to 2-1/4” high x up to 50’ long -- Power of upper rollers: (2) 3HP motors with a 1:10 gear ratio -- Power of lower roller: (1) 5HP motor with a 1:10 gear ratio -- In-feed Inverter: (1) 15HP motor -- In-feed speed: From 32 to 295 FPM -- Cut-off saw: With 7.5HP motor driving the arbor at 2,850 RPM -- Sawblade: 14” diameter x 120 tooth -- Hydraulic power to the Pressing Cylinders: (2) 20HP with high speed oil tank -- Hydraulic pressure output: 1,700 PSI at the joint -- Capacity (1) to (4) 50’ assembled boards per minute -- Machine comes arranged with equipment to assemble (3) sizes of material cross sections according to buyer’s specifications for width within +/-3/16” width toleranceSYSTEM REQUIREM