Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 78
1559 Results Found
Sort By 
Recently Added Items
2006 Timesavers 2300
Call For Price
2006 Timesavers 2300
Brewer
Call For Price
Brewer
Makor K2
Call For Price
Makor K2
Diehl 75
$4,900
Diehl 75
2019 Cam-Wood ZYBW 160E  Vacuum Pump
$4,485

7.5 HP Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 95 CFM with max. 22"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less Vacuum Pump is virtually maintenance-free with: Built-in carbon vanes & built-in suction filters; vacuum regulating valve with canister filter, motor speed of 1,440 RPM.

Norm Schust
800-374-5009 ext:445
Call

2019 Cam-Wood SP-30  Shaper
$1,575

CAM-WOOD SP-30 Fixed Spindle ShaperA Shaper with plenty of cast iron... a solid piece of machinery!Features & Specifications: -- 3 HP Motor with reversing switch. -- Interchangeable spindle as standard with a 1" & 3/4" spindles. -- Spindle with 4" under nut. -- (2) Spindle speeds of 8,000 & 10,000 RPM. -- Large 30" x 28" cast iron precision ground table. -- 7" Max. table ring. -- Easily locked spindle for cutter change. -- Micro-adjustable back fence with material spring holddowns. -- Includes Miter gauge, cutterhead guard assembly, and operators manual.NOTE: Available in 3-Phase and 1-Phase electric.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Cam-Wood WS-NA900  Sander
$40,990

CAM-WOOD WS-NA900 Planer Sander -- 2 Heads with 36" width capacity planer head and combination sanding headFeatures: -- This machine is especially designed for tale off heavy materials such as glue panel, bend board, rough lumber. -- The first head is a knife planer head, with 25 HP motorThe spiral planer cutterhead is fitted with 14 x 14 MM, four edge throw away Tungsten Carbide knife inserts, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect. Changing knife inserts are conveniently done without removing the cutterhead. -- The second head is a combination of drum and platen driven by a 20 HP motor, belt size 37" X 75" -- Anti-kickback fingers, mounted at the infeed of the machine, this anti-kickback finger gives a safety guard for the operator. -- Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically for safety guard.Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback. -- Motorized elevation of conveyor table (micro-computer controlled with digital readout), it accurately displays the position of the conveyor table and automatically moves to the setting thickness for planning, sanding. -- Panel cleaning brush roller; built at outfeed end of the machine, this cleaning brush roller cleans the powder on the sanded panel. -- Hold-down plate is hard chrome treated for maximum wear resistance.Technical Specification: -- Working width 36" -- Working thickness up to 5" -- Minimum working length 12 1/2" -- Feed speed 10 to 53 FPM driven by 3 HP motor -- Table raised and lowered by 1/2 HP motor

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood BR-50  Boring Machine
$6,190

CAM-WOOD BR-50 Universal Boring MachineFeatures & Specifications: -- 3 HP Pneumatic Universal Boring Machine, all adjustments feature an index plate for accurate and convenient reading, workplace clamping. -- 0" - 4" Spindle stroke, 7/16" - 14-thread screw shank, 1/2" max. bit capacity. -- Complete with: Air operated overhead holddown clamp and foot pedal operated drill cycle. -- Drill Head can be swiveled 360° and Optional Multi-Spindle drill heads available.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood BR-25  Boring Machine
$3,590

CAM-WOOD BR 25 Horizontal DrillFeatures & Specifications: -- Single Spindle, 2 HP - 3450 RPM 3-phase motor, adjustable vertically and front to back. -- 5" Horizontal spindle travel (drilling depth) w/foot pedal control. -- 3-1/2" Vertical table adjustment. -- Pneumatic holddown clamp for up to 3" thickness. -- 12" x 10" Table size. -- 1/2" Drill chuck / 3/4" max. bit diameter.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood SET-86TS  Tennoner
$39,990

CAM-WOOD SET-86TS Double End Tenoner 6 HeadsCapacity & Style: -- Max. 98" working capacity, min. 12"; max. 4" opening, 24" load area in front of hold-downs. -- Single-post machine, single "dual-track" base, right side fixed, left side movable. -- Motorized opening with LED indicator.Each side equipped with: -- Front of post: Bottom scoring unit, 2 HP - 3,600 RPM motor, 1" dia. arbor & up to 10" blade. -- Top trim head, 3 HP - 3,600 RPM motor, 1" dia. arbor for up to 10" blade. -- Back of post: Vertical shaping head, 5 HP - 7,200 RPM motor, 5-7/8" (150 mm) long & 1" dia. arbor, 8" max. dia. cutter-head. -- Variable feed speed from 12 - 52 FPM, 1 HP motor, steel feed chains with plastic anti-slip pads and dogs at 6" center. -- Spring loaded overhead hold-down beams w/endless belts. -- Separate electrical control cabinet with operator controls.Options Available: -- Cross transfer system with transfer line 4' X 4' transfer table with rollers (addirional $23,600). -- Hopper feed magazine (additional $3,990). -- Pneumatic jump control on scoring or shaping unit. -- Sound enclosure -- Electric motor brake -- Central supportNote: Pictures are showing the machine with several options included

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood WP-2000  Planer
$4,850

CAM-WOOD WP-2000 Single Sided Planer20" Planer with solid cast iron construction.Features & Specifications: -- Precision ground cast iron table w/manual adjustment by hand wheel via (2) large lead screws. -- Scale & pointer readout for accurate thickness adjustments. -- 3-Knife cutterhead. -- Fixed feed speed setting for consistent stock removal. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit. Options: Single-phase power, please add ...$ 220; STEALTH Helical head, add ...$ 1,250.

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood WP-2400  Planer
$5,740

CAM-WOOD WP-2400 Single Sided PlanerFeatures & Specifications: -- Solid cast iron construction. -- Precision ground cast iron table w/manual adjustment by hand wheel via (2) large lead screws. -- Scale & pointer readout for accurate thickness adjustments. -- 3-Knife cutterhead. -- Fixed feed speed setting for consistent stock removal. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor 5 HP. -- Magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit. -- Options: STEALTH Helical head, add ...$ 1,890

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood WP-1010H  Planer
$22,950

CAM-WOOD WP-1010H Single Sided Planer40" Solid cast iron construction planer with 20 HP motor.Features & Specifications: -- Precision ground cast iron table with motorized work table raising & lowering manual adjustment by hand wheel via (2) large lead screws. -- Digital thickness display with touch pad positioning control for accurate thickness adjustments. -- Maximum thickness capacity -- 8"Spiral cutterhead with 4-sided carbide inserts provide precise, efficient planing with low noise levels. -- With (4) each 4" diameter dust outlets -- 20 HP Main drive motor. -- 3 HP Variable feed speed 10 to 50 FPM -- Maximum depth of cut 1/4". -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit.

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood XL 600  Planer
$26,800

CAM-WOOD XL-600 Top & Bottom Planer with STRAIGHT KNIFE HEADS WITH HSS KNIVES OR OPTIONAL SPIRAL CARBIDE INSERT CUTTERHEADS:Spiral Heads with Carbide Insert Knives, add ...$3,470.24" Capacity Planer for accurate and powerful two-sided planing in one pass.Specifications: -- 24” Max. Planning Width 6-5/8” Max. Planning Thickness -- 1/4”Max. Cutting Depth -- 12” Min. Planning Length -- 10 to 70 FPM Feed Speeds (Variable) -- 4,200 RPM Cutter Head Speed -- 4-Knife Cutterheads -- 30 HP Top Head Motor -- 15 HP Bottom Head Motor -- 3 HP Feed Motor -- 1 HP Elevation Motor -- Table Size (L x W) 93" x 24" -- Net weight 6,930 Lbs and Gross weight 7,700 LbsEquipped with: -- Standard equipment includes Automatic Thickness Controller for quick, accurate thickness adjustments. -- Top and bottom straight knife cutter heads with HSS knives for accurate and powerful two-sided planing in a single pass. -- The Planer’s table surface is precision ground then chrome-plated and polished to a mirror finish; wear resistance, easy to clean and maintain.Feed System: -- Heavy-duty upper feed carpet (conveyor) with spring-loaded steel “fingers” holds stock firmly against the Planer’s table; prevents stock splitting while providing positive feed and smooth finish for rough and finish planing. The conveyor (carpet) is fitted with numerous pressure pins, or fingers, which firmly holds and stabilizes stock during the planing process. Fingers apply moderate pressure to the stock and provides accurate planing while preventing wide cupped boards from splitting and feeding problems while planing narrow material. -- (4) Powered feed rolls are driven via a gearbox linked to heavy-duty chains and sprockets; provides smooth even feeding during rough and finish planing. -- Stepless variable speed control for smooth adjustment of feed speed depending on the material hardness, depth of cut & width; allows for the best finish and feed speed. -- Anti-kickback device provides safety and is designed to work in unison with a conveyor stop. Safeguards mechanical parts in case of overload situations.Features: -- The heavy-duty CAST IRON frame supports the worktable, helps dampen vibration, and ensures years of dependable service. -- Powerful industrial motors for maximum cutting capacity. -- All precision sealed-for-life bearings for long and durable use. -- A built in cutterhead stand is designed for convenient knife changing at the bottom cutterhead. -- Changing knives on the upper cutter head only requires removal of the upper dust chute. -- Setup time is minimized to set cutter head height using the auto material thickness device. -- The top and bottom cutter heads are precision balanced to provide smooth, chatter-free planing regardless of the feed rate or hardness of planed material. -- 1/2 HP Motor provides quick and accurate top head thickness adjustments. Optional: Spiral Insert Cutterheads allow fast, accurate ins

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cam-Wood PL-12  Planer
$16,800

CAM-WOOD XL 3000 12" Wide Double SurfacerFEATURES: -- With straight knife HSS Cutterheads -- Standard equip with Automatic Thickness Controller, easy and quick setting for the cutting thickness -- Top & bottom straight knife cutter heads for accurate and powerful two-sided planing in one pass. -- Auto digital thickness control for quickly and accurate setup. -- The worktable surface was precision ground and then electric chrome-plated and polished to a smooth mirror finish. The durable wear resistance surface is easy to clean and maintain. -- A heavy-duty feed conveyor with metal spikes firmly holds stock securely to the worktable and feeds positively giving a smooth finish for rough or final planing. -- A variable speed control by invertor for smooth adjustment of feed rate depending on the material hardness, depth of cut & width to provide the best finish surface and fast cutting performance. -- The in-feed conveyor is fitted with numerous pressure pins so the feeding process can be firmly stabilized. It will moderately press the stock, and then accurate planing surface can be performed to prevent jumping during processing of narrow or bent material. -- The (4) power feed rollers are driven with a geared transmission box linked with heavy-duty drive chain and gears to provide a smooth even feeding during rough or finish planing. -- A twist torsion anti-kickback device provides additional safety. It’s designed to work in conjunction with the built-in conveyor stop. It safeguards mechanical parts in case of overload SPECIFICATIONS: -- 7-1/2” HP Top Head Motor -- 5 HP Bottom Head Motor -- 12-1/2” Max. Working Width -- 4-3/4” Max. Working Thickness -- 19/32” Min. Working Thickness -- 13” Min. Working Length -- 1/4” Max. Cutting Depth -- 2 HP Feed Motor -- Feed Speed (Invertor drive) from 15 to 52 FPM -- 5,000 RPM Cutter Head Speed -- Cutter Knife Size 320 x 30 x 6 mm -- (4) Knife Cutterheads -- 1/2 HP Elevation MotorOptional: -- Spiral Insert Cutterheads allow fast, accurate insert changes and minimum down time - add ...$2,500 -- If required, change voltage up or down, add $475

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cam-Wood A-3775  Sander
$15,750

CAM-WOOD A-3775 SINGLE HEAD WIDE BELT SANDER36" Width cap. - Combination Sanding head with rubber covered contact roll and adjustable finishing platen. 20 HP main drive motor. -- 37" X 75"" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, Digital thickness set-up via 0.5 HP motor power elevation for thickness opening. -- Variable conveyor feed speed from 20 to 60 FPM, 1 HP feed motor. -- 5" Max. working thickness, 7" min. working length, -- Double Infeed & outfeed spring loaded holddown rolls.Complete with: -- Magnetic controls, 6" dia. dust collection hood, and safety shutoff. - 1,500 CFM Dust collection required.

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood SM-236U  Moulder
$49,900

CAM-WOOD Model SM-236U Moulder Feed Through -- 6-Head (B-R-L-T-T-U), working cap. 9" x 4-3/4" -- Head sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 15 HP, Top 15 HP and Universal 5.5 HP motor. --SPECIFICATIONS --Max. (Min.) Working Thickness 4-3/4" (5/16") --Min. Working Length 9½" --Feed Motor 7½ HP --Elevation 1½ HP -- Spindle Dia.: 40 MM with cutterhead speed of 6,000. Mechanical digital readouts for all spindle adjustments, as well as chipbreakers and pressure elements. Tool cutting circles: vertical spindles 5" to 6.25" and top spindles 5" to 7". -- Variable Feed: From16 ~ 82 FPM with LED speed readout. Over sized top and bottom rollers run synchronized, ensuring smooth feeding. The three independent section pneumatic pressures for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding. -- Universal spindle with 270° rotation form the left side. -- Includes: Infeed table 2M (6'6") with manual table lubrication ports. Side pressure roller at infeed; Hard chrome-plated table for maximum wear resistance. Full sound and safety enclosure and manuals. Optional: Short Stock Feed Package $900.00

Bob Dykstra
800-374-5009 ext:378
Call

2019 Cam-Wood SM-155A  Moulder
$23,900

CAM-WOOD SM-155A Feed Through Moulder 5-Head Moulder with a 6" width and a 4.75" max. capacity.Equipped with: -- Cast Iron main frame to maximize stability & minimize vibration during operation for years of use. -- Fully enclosed sound hood with lift up door for easy set-up access. -- Adjustable infeed table w/fence for straightening rough sawn material. -- 16 - 66 FPM Variable feed speed system with top driven rollers. -- All spindle adjustments except 1st bottom spindle with mechanical digital readouts. -- Left and top spindles with mechanical digi-set readouts. Chipbreaker and pressure element with mechanical digital readouts for accurate adjustment and precise settings.Complete with: 5' Infeed table length, Chromed table plates, fences and pressure shoes. Manual waxilit pump, Central lubrication of the machine from the front side.SPECIFICATIONS SM-155A Max. (Min.) Working Width 6" (3/4")Max. (Min.) Working Thickness 4-3/4" (5/16")Min. Working Length 9½"1st Spindle Horsepower 7½ HP2nd, 3rd Spindle Horsepower 5½, 5½ HP4th, 5th Spindle Horsepower 7½, 7½ HPFeed Motor 4 HPElevation 1 HPSpindle Diameter 40 MMCutter Speeds (RPM) 6500Variable Feed Speeds (FPM) 17 ~ 66Cutter head Diameter 1st Bottom Head 5"2nd ,3rd Vertical Head 5" ~ 6-1/4"4th, 5th Head 5" ~ 7"Pneumatic Air 90 PSI (CFM) 5Dust Outlet Diameter 5" x 5N.W. (LBS) 5900G.W. (LBS) 6700Includes: -- Operator/spare parts manuals and set up tools.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Cam-Wood SET-46TS  Tennoner
$36,090

CAM-WOOD SET-46TS 6 Heads Double End Tenoner: Capacity: -- Max. 48" working capacity, min. 12"; max. 4" opening, 24" load area in front of hold-downs. -- Motorized opening with LED indicator; -- Single-post machine, single "dual-track" base, right side fixed, left side movable.Each side equipped -- Front of post: Bottom scoring unit, 2 HP - 3,600 RPM motor, 1" dia. arbor & up to 10" blade; -- Top trim head, 3 HP - 3,600 RPM motor, 1" dia. arbor for up to 10" blade; -- Back of post: Vertical shaping head, 5 HP - 7,200 RPM motor, 5-7/8" (150 mm) long & 1" dia. arbor, 8" max. dia. cutter-head. -- Variable feed speed from 12 - 52 FPM, 1 HP motor, steel feed chains with plastic anti-slip pads and dogs at 6" center, --Spring loaded overhead hold-down beams w/endless belts. -- Separate electrical control cabinet with operator controls.Options Available: -- Cross transfer system with transfer line 4' X 4' transfer table with rollers (addirional $23,600) -- Hopper feed magazine (additional $3,990) -- Pneumatic jump control on scoring or shaping unit

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood SET-86DET  Tennoner
$69,900

CAM-WOOD SET-86DET SSC 6 Heads Double End Tenoner -- Suitable for mass production of woodworking task for double end cutting, tenoning, grooving, profiling and sanding -- Saw, Shaper, Shaper: Total 3 stations at both sides. -- It is a powerful machine great for heavy-duty production.Capacity: -- The specially designed numeric controller allows quick setting of sizes, for the tolerance within 0.004”. -- Variable speed, through feed, wide rubber pad, spring loaded dogs at 8" center conveyor for the best finish selections. -- Heavy-duty pressure rolls at top of wide width conveyor to hold the material tight to prevent sliding during the cutting process. -- Shaper head can be moved up & down, forward & backward. -- Max. 96" working capacity, min. 12"; max. 3 1/8" opening, 24" load area in front of hold-downs. -- .The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 20~82 FPM. -- Motorized opening with LED indicator.Each side equipped -- Scoring saw unit , 2 HP - 3,600 RPM motor, 1" dia. arbor & up to 8" blade -- Trim saw tiltable unit, 3 HP , 3,600 RPM motor, 1" arbor and up to 10" blade. -- Shape/coping head unit. , 7.5 HP - 4,500-7,000 RPM motor, 1 1/4" or 40 mm dia. arbor for up to 8" cutter head. -- Variable feed speed from 20 - 66 FPM, 1 HP motor, steel feed chains with plastic anti-slip pads and dogs at 6" center. -- Spring loaded overhead hold-down beams w/endless belts. -- Separate electrical control cabinet with operator controls.Options Available: -- Hopper feed magazine -- Pneumatic jump control on scoring or shaping unit. -- Sound enclosure -- Electric motor brake -- Jump shaper -- Tilting shaperFloor space : 14' X 9' X 5", weight 10,500 lbs

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood EGS-947  Sander
$5,990

CAM-WOOD EGS-947 Oscillating Edge Sander with End Table.Features & Specifications: -- 9" Wide x 138" long belt. -- 9" x 48" Graphite covered platen. -- 5 HP Motor w/magnetic switch. -- 7" Diameter drive pulley. -- 12" x 64" Front table with a 9" vertical adjustment. -- 12" x 19" End table with a 9" vertical adjustment for radius work. -- Fabricated steel base and swing-away dust hood.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Comeva COMPACTA 4 DOOR  Edgebander
$23,990

COMEVA COMPACTA 4 Door Edgebander (Compact size):Edgebander with TILTING GLUING and PRESSURE SECTION especially designed to edge band beveled doors and boards. 0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.393" - 2") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). -- Minimum panel dimensions 100 mm wide x 160 mm long (3.9" x 6.3").Equipped with: -- Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1- 3 mm max.) with 3 mm PVC cap. guillotine. -- Tiltable (0 - 10°) Gluing unit with teflon coated glue pot w/fast (10 - 12) Min heat-up time; 4-liter capacity. -- Guillotine to cut edgebanding in coils up to 3 mm thick. -- Pneumatically controlled tiltable (0 - 10°) pressure section with (3) pressure rollers; 1st driven, (2) idle rollers.Workstations: -- Double Motor End Trimming Saws, (2) 1 HP (0.75 kW) - 12,000 RPM High Frequency motors. -- Top & Bottom Trim station with (2) 0.75 HP (0.56 kW) - 12,000 RPM High Frequency motors; unit features adjustable copying on vertical & horizontal floating movements, adjustable cutterhead position by mechanical digital readouts, quick release (electrical & mechanical). -- Includes (2) 3 mm radius cutters. -- Top & Bottom 3 mm Super-Finish PVC/ABS Scrape station with quick adjusting and exclusion setting of both top & bottom units, micrometer adjustment; features thick chrome plated copying shoes, body of unit is cast iron to ensure vibration free scraping during operation. -- Top & Bottom Buffing unit with (2) 0.5 HP (0.37 kW) - 1,400 RPM motors. Feed & Holddown: -- Feed chain pads with replaceable rubberized surface inserts. -- Special design "track frame" to eliminate feed chain side-to-side movement after years of use. -- Rubberized holddown rollers with ball bearings for low friction and long life. -- Complete with: Safely enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-year Factory Warranty on parts.

Ed Webb
800-374-5009 ext:377
Call

2019 Comeva BASIC C  Edgebander
$6,400

COMEVA BASIC C Contour EdgebanderDesigned for straight or curved (contour) edge banding. Working capacity: -- 0.4 - 3 mm Edge banding thickness, 15 - 60 mm panel thickness. Minimum internal radius 25 mm.Variable feed speed: -- 0 - 46 FPM (0 - 14 MPM).Equipped with: -- Compact "quick heat-up", underneath worktable glue pot, double roller glue applicator; magazine for coil material or solid strips, manual feeding of straight and/or contoured panels.Complete with: -- Edgebanding coil feeding table for rolls of 700 mm; programmable controlled end-cutoff for coil material, and digital thermo-control for glue temperature.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

Ed Webb
800-374-5009 ext:377
Call

2019 Comeva COMPACTA 4  Edgebander
$21,950

COMEVA - COMPACTA 4, ...Edgebander (Compact size).0.4 mm - 3 mm Max. edge thickness cap., 10 mm - 50 mm (0.393" - 2") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). -- Minimum panel dimensions 100 mm wide x 160 mm long (3.9" x 6.3").Equipped with: -- Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1 - 3 mm max.) with 3 mm PVC cap. guillotine. -- Tefloncoated glue pot w/fast (10 - 12) Min heat-up time; 4-liter capacity. -- Guillotine to cut edgebanding in coils up to 3 mm thick. -- Pneumatically controlled pressure section with (3) pressure rollers; 1st drive, (2) idle.Workstations: -- Double-Motor end trimming saw unit with: (2) 1 HP (0.75 kW) - 12,000 RPM High Frequency motors. -- Top & Bottom Trim station with: (2) 0.75 HP (0.56 kW) - 12,000 RPM High Frequency motors; unit features adjustable copying on vertical & horizontal floating movements, adjustable cutterhead position by mechanical digital readouts, quick release (electrical & mechanical). -- Includes: (2) 3 mm Radius Cutters. -- Top & Bottom 3 mm Super-Finish PVC/ABS Scrape Station with: Quick working or exclusion setting of both top & bottom units, micrometer adjustment; features thick chrome plated copying shoes. Body of unit is cast iron to ensure vibration-free scraping during operation. -- Top & Bottom Buffing Unit with: (2) 0.50 HP (0.37 kW) - 1,400 RPM motors. Feed & Holddown: -- Feed chain pads with replaceable rubberized surface inserts. -- Special design "track frame" to eliminate feed chain side-to-side movement after years of use. -- Rubberized holddown rollers with ball bearings for low friction and long life. -- Complete with: Sound enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

Ed Webb
800-374-5009 ext:377
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved