Hogs and Wood Grinders For Sale

Hogs and Wood Grinders 

Band Mills (Wide) (45) Band Mills (Thin Kerf) (71) Debarkers (80) Edger-Boards (65) Forklifts (59) Gang Saws (52) Hogs and Wood Grinders (222) Portable Sawmills (31) Resaws-Band (167) Scragg Mills (36) Trim Saws (77) Unscramblers (31) Wheel Loaders (78) Wood Chippers - Stationary (153)
Air Compressors (157) Airlocks (23) Banding-Strapping Machines (173) Blowers and Fans (139) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (30) Carriage Drives (Sawmill) (58) Chip Bins (17) Chip Cyclones (26) Chip Screens (38) Chipping Canters (3) Chop Saws (63) Circular Saw Husks (7) Circular Sawmills (90) Conveyors (86) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (211) Conveyors General (26) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (46) Conveyors Belts (197) Conveyors-Barn Sweep (22) Conveyors-Live Roll (113) Dip Tanks (6) Drills Single-Multiple (1) Drum Dryers (16) Dry Kilns (46) Dump Hoppers (9) Dust Collection Systems (270) Edger Tailing Devices (5) Edgers-Gang (41) Edgers-Slab (6) Edgers-Vertical (6) Electrical (170) Gang Rip Saws (115) GenSets (40) Hammer Mills (14) Hydraulic Power Packs (94) Knife Grinders (39) Laser Lights (7) Log Home Machinery (15) Log Merchandising Systems (14) Log Turners (Sawmill) (38) Lumber Carts (18) Lumber Sorters (7) Lumber Stackers (24) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (35) Misc (100) Operator Cabs (34) Package Saws (2) Parts and Parts Machines (9) Post and Pole Peelers (22) Power Units-Engines (6) Radial Arm Saws (31) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (110) Shavings Baggers (1) Shavings Mills (23) Slab Saws (10) Stake Pointers (4) Step Feeders (3) Straight Line Rips (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 9 of 12
222 Results Found
Sort By 
Recently Added Items
2008 Vecoplan RG 42/60 XL Grinder
Call For Price
2008 Vecoplan RG 42/60 XL Grinder
Kuiet Kut
$19,500
Kuiet Kut
$ 32,500

VECOPLAN VAZ 120/105 Low noise Wood Waste GrinderSpecifications: -- Vertical 2.9 cubic yard hopper, 42" X 48" opening, 30 HP rotor motor. -- 10" Dia. rotor with (27) indexable, replaceable cutter knives, rotor/cutterhead grinds at 120 RPM. -- Hydraulic pusher ram; separate electrical control panel with pushbutton controls, 80 DBA noise level. -- Features: -- 4-Sided flared hopper, Fluid TurboCoupling. -- Easy access Screen, Suitable for Wood, Plastic or Paper applications.

Jim Reedy
800-374-5009 ext:455
Call

$ 82,950

VECOPLAN - RG 52, ...Single Shaft ShredderCOMPLETELY Rebuilt!VECOPLAN "RG 52" Low Noise Waste Grinder with: Vertical hopper feed; suitable for wood, paper, and plastic applications; 52" x 58" opening. -- 60 HP Rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (74) 4-way indexable, replaceable cutterknives. -- Rotor/cutter head grinds at approx. 120 - 140 RPM; average noise level 60 - 70 dbA. -- Includes: Heavy Duty construction stress-relieved shell and frame; tramp metal protection; oversized gear box and Heavy Duty roller bearings. -- Precision hydraulic "Process Ram" with: 5 HP, 2-Speed pump motor; fluid "TurboCoupling; monitored by programmable logic control feeding system. -- Separate electrical Control Panel with push button controls. -- Machine weight: 10,000 - 12,000 Lbs.

Katie Lechelt
800-374-5009 ext:452
Call

$

VECOPLAN RG 70/200K Shredder with Steel Belt Conveyor & Dust CollectorSpecifications: -- Hopper Opening: 70″ x 80″ -- Hopper Volume: 4 – 6-1/2 Cubic Yards -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Screen size: Holes 2″ -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/HrEquipped with: -- 10 HP Motor Dust Collector -- 48″ W kW SCHMIDT Shredder Infeed Conveyor w/ 20′ pit section

Katie Lechelt
800-374-5009 ext:452
Call

$ 245,000

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

Josh Digirolamo
828-302-7264
Call

$

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 2,250

16' x 10" Wide Vibrating Conveyor with 10" wide pan; 1/2" stroke at 585 RPM, feeds at approx. 25 FPM.

Jim Reedy
800-374-5009 ext:455
Call

$ 36,900

WEIMA Horizontal Beaver 300 Slow Speed, High Torque Waste Grinder w/Vibratory Conveyor. 25 HP (18.5 kW), 10" rotor diameter, 11.8" (300 mm) rotor length, (14) 40 x 40 mm indexable, concave cutters; 11.8" x 4" infeed opening. Equipped with: -- WRRL 300 12' Vibratory Conveyor (550 Lbs). -- The "Horizontal Beaver" receives the material from a vibratory conveyor system; from the conveyor, a feed roller system pinches and feeds the material into the rotor. -- Features: Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife; the V-Rotor produces uniform discharged material that is free of splinters and dedicates more horsepower to grinding. -- Includes integrated "plug-and-play" electrical control system with UL approved components; -- Extraction requirements: 1,900 CFM (28 MPS), 8" (200 mm) diameter for dust collection. Total Approx. weight of 2,430 Lbs.

Jim Reedy
800-374-5009 ext:455
Call

$ 58,600

WEIMA WLK 8 Vertical Hopper-fed Low-noise GrinderSpecifications: -- 39" x 49" Hopper opening at the top, 1.75 cu. yds. cap.; (3) sides straight with curved back wall. -- 35 HP (27 kW) rotor motor, 10" dia. patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Equipped with: --39.4" Long rotor operating at 80 - 120 RPM; with (54) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- WEIMA'S proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Options: -- Flared hopper, material discharge auger; programmable logic controls and ram comb.

Jim Reedy
800-374-5009 ext:455
Call

$ 29,500

WEIMA Woodchuck Low Noise Slow Speed Vertical Wood Waste Grinder:A low cost/investment solution for Woodwaste disposal - feasible for a small shop.Specifications: -- 25 HP Main Drive motor; 24" x 41" hopper opening, 0.74 cu. yds cap; 10" dia. rotor, 100 RPM. -- Equipped with: -- (28) 40 mm x 40 mm Concave, indexable cutters; 6" discharge outlet. -- Features: -- Patented V-ROTOR design utilizes tooling closely matched to grooves in the counter-knife. -- V-ROTOR Produces uniform discharged material, free of splinters and dedicates more horsepower to grinding. -- Includes: -- 5/8" or 3/4" screen (TBD); Integrated "plug-and-play" electrical control system with UL approved components; 1-Year warranty, operations and parts manuals. .

Jim Reedy
800-374-5009 ext:455
Call

$ 50,600

WEIMA WLK-6 Vertical hopper-fed low-noise Waste Grinder. -- Equipped with: 31-1/2" x 49" hopper opening at the top, 1.2 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 30 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 120 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: WEIMA's proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: A/B Programmable Logic Controller. -- Options: Flared hopper, material discharge auger.

Jim Reedy
800-374-5009 ext:455
Call

$ 97,870

WEIMA WLK 10 Vertical Hopper-Fed Low-Noise Grinder Equipped with: -- 39.4" x 47.2" Hopper opening at the top, 1.7 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 60 HP rotor motor, 14-1/2" dia. The patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 60 - 120 RPM; equipped with (52) replaceable back bolt-on (4 x indexable) concave-shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Features: -- WEIMA'S proprietary gearbox is designed specifically for slow-speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL-approved components (system UL certification available upon request for an additional charge). -- Ground material output depends on screen hole size and material from 1,200-2,500 Lbs/Hr.; 3/4" holes are supplied standard screen hole size. Options: -- Flared hopper, material discharge auger; programmable logic controls, and ram comb.

Jim Reedy
800-374-5009 ext:455
Call

$ 60,100

WEIMA TIGER 400 Horizontal Slow Speed Single Shaft Wood Grinder w/Vibratory ConveyorSpecifications: -- 6" High (160 mm) x 15-11/16" (400 mm) wide max. infeed opening, 50 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (22) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12'), is also tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

Jim Reedy
800-374-5009 ext:455
Call

$ 74,400

WEIMA TIGER 600 Horizontal Slow Speed Grinder w/Vibratory ConveyorSpecifications: -- 6" High x 23.6" wide max. infeed opening, 50-60 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (32) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12') is tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: -- Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

Jim Reedy
800-374-5009 ext:455
Call

$ 155,400

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 120 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included); false wall; 3/8" - 4" screen available. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

Jim Reedy
800-374-5009 ext:455
Call

$ 99,500

WEIMA TH 614 HD Metal Briquette Press w/WEIMA ZMK 30 4-Shaft Shredder & ConveyorProduces 60 mm dia. x 4" (100 mm) long compacted logs; approx. 1 cu. m square vertical hopper.Specifications: -- 18 HP motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. -- Centralized control panel for easy operation. Auger, oil cooler, auto. on/off switch, oil level sensor, auto length adjuster. -- Includes: -- Metal package for TH 614 HD; catch pan with level switch; fluid pump with 10' of hose; tool steel pressing rod, wear sleeves and clamp; discharge pipe for conveying 60 mm diameter briquettes (3 sections: 1 x 45°; 1 x 90° & 1 x straight). WEIMA ZMK 30 4-Shaft Shredder 4-Shaft Shredder with electrical cabinet & controls.Specifications: -- Dual drive motors - (2) 11 kW (15 HP) Drive motors; hopper opening measures 39.4" x 55.1" (1,000 x 1,400 mm); cutting chamber opening of 18.2"x 27.6" (462 x 700 mm); rotor length of 18.2" (462 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter.JORGENSEN Transfer Conveyor18" Wide steel belt; collection hopper for under ZMK 30; coolant pump and float switch for fluid transfer.

Jim Reedy
800-374-5009 ext:455
Call

$ 72,500

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 150 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included). -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components. -- Recommended for plastic, paper or wood applications.

Jim Reedy
800-374-5009 ext:455
Call

$ 57,500

WEIMA WL-6S Low-Noise Vertical Hopper-Fed GrinderSpecifications: -- 31-1/2" x 47-1/2" Hopper opening w/flared extension, 1.6 cu. yds. cap.; 14-1/2" rotor dia.; 31-1/2" rotor length (800 mm). -- 60 HP Motor; patented "F-ROTOR" design for cloth and fiber; utilizes a V-groove rotor closely matched to grooves in the counter-knife. Equipped with: -- Recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Complete with: -- 8" Dia. dust collection outlet (1,900 CFM required); 1/2" interchangeable screen; 900 - 2,200 Lbs/Hr output (depending on screen size, material density, and moisture content). -- 3 HP Hydraulic motor; hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. Features: -- Heavy Duty structural steel frame, welded construction.

Jim Reedy
800-374-5009 ext:455
Call

$

WEIMA WLB 400 Horizontal Low-Speed Grinder Specifications: -- 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives. Features: -- Top infeed roller, 15-1/2" x 2-1/2" feed opening; -- Heavy Duty Industrial Grade construction with stress-relieved shell and frame; -- Heavy Duty outboard roller bearings; separate electrical control panel. -- Complete with: -- 8" Dia. collection outlet; 3/4" screen. -- Only (40) operating hours.

Jim Reedy
800-374-5009 ext:455
Call

$ 16,000

WEIMA WL-4S Vertical Hopper Fed Low Noise Grinder, with 25,244 Hrs. (As of 10/31/23), with New Bearings & Belts in 2022!Specifications: -- 23-1/2" x 31-1/2" (600 - 800 mm) Hopper opening at top, 0.8 cu. yds. (0.6 cu. m) cap. -- 22 kW (30 HP) Motor with Hydraulic clutch, 14-1/2" Dia. Rotor grinds at 90 RPM. -- Patented "V-Rotor" design utilizes V-groove rotor closely matched to grooves in counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding.Equipped with: -- Spiral cutterhead, Welded knife holders, Approx. 14 - 15 Recessed concave cutters with low clearance over rotor to extend cutter life, protect bolts, and reduce machine wear. -- 3/4" Screen 8" dia. chip collection outlet (1,900 CFM required). -- Hydraulic ram, with 0.75 kW (1 HP) Hydraulic unit, Optimizes feed pressure by monitoring rotor motor amperage, lateral force on ram is minimized by unique "U-Joint" mounting system. Features: -- Heavy-duty structural steel frame, Welded construction, Integrated "plug-and-play" electrical control system with UL-approved components. -- Capable of processing 600 - 1,500 Lbs./Hr. depending on material and screen size.

Jim Reedy
800-374-5009 ext:455
Call

$ 29,500

WEIMA WLB 400 Horizontal Low-Speed Grinder Equipped with: -- 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives. Features: -- Top infeed roller, 15-1/2" x 2-1/2" feed opening; Heavy Duty Industrial Grade construction with stress-relieved shell and frame; Heavy Duty outboard roller bearings; separate electrical control panel. Complete with: -- 8" Dia. collection outlet; 3/4" screen.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved