Hogs and Wood Grinders For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 9
177 Results Found
Sort By 
$ 65,900

ROBUST SD 70 Low Noise Vertical Wood Waste GrinderBasic machine features: -- BOVER_BASIC intelligent control system -- Power set (electric motor, reduction gear, and belt transmission) -- Vertical hopper -- Hydraulic pressure unit -- Robust and adjustable -- Hardened knives with four cutting edges with an extended service life -- Hardened cleaning knives -- Hardened cutting racks -- HARDOX sieve -- The motor start-up is controlled by the star/triangle systemTechnical Specifications: -- Main motor 30 kW (40 HP) -- Top Opening: 1445 mm × 1345mm ( 56.8" X 53") -- Rotor working length: 650 mm -- Rotor diameter: 270 mm -- Number of knives: 28 -- Screen hole diameter 10 - 50 mm -- Production capacity: 3 - 5 Cubic meter -- Weight : 1,750 Kg (3,850 Lbs) -- OAL 1973 mm X 1548 mm (77.6" X 61")

Jim Reedy
800-374-5009 ext:455
Call

$ 80,000

2005 Rotochopper Cp118 -1600 hours -120 hp engine -Lights and tires -One belt needs a patch(will be repaired)

Josh Digirolamo
828-302-7264
Call

$ 47,500

waste grinder, 24" wide infeed belt, 125 hp electric drive, good working condition

 Wolcottville, IN
Showcase Equipment
260-250-4645
Call

Call for Price

2009 Rotochopper E256 Grinder/Shredder | 200 HP electric rotor drive motor | 50 electric hydraulics motor |

Pallet Machinery Group
540-644-9220
Call

$ 449,500

(2) RUF 1100+ Briquetter SystemComplete with the following features and components: -- RUF Briquetting Machines are exceptionally strong and low maintenance. The Presses are simple, compact, and can be installed almost anywhere. The machines are designed to run (24) hours a day. If the material to be briquetted is fed automatically into the hopper, then no operating personnel is required. -- Machine Cap.: 2,200 - 2,600 Lbs/Hr. -- Moisture Content: <15% acceptable, <12% preferred. -- Machine Production: Up to 600 Briquettes/Hour (each Briquetter); approx. (16,000) total operating hours.Machine Specifications: &#9679 Input voltage: 480 Volt, 60 Hz, 3 Phase. &#9679 Control voltage: 24 Volt DC. &#9679 Hydraulic power unit motor: 100 HP. &#9679 Three inline axial piston pumps. &#9679 Main press cylinder: 14” diameter, 300 tonnes, 24,300 PSI specific pressure. &#9679 Hopper opening: 23 ½” x 39”.Includes: (1) ARPAC Package Sealer - seal bar sealer and heat tunnel; (1) 40 ft section of powered conveyor; (1) 40 ft section of roller conveyor; (1) ORION pallet wrapper; (1) 5000# floor scale; sawdust receiving bin with chain feed; 12' U-trough auger; 5’ x 5’ precision chip screen; 50 HP MEADOWS Model 35 Hammermill; 22' tube auger; screw bottom-feeding bin; (2) 6" augers feeding presses; Air Compressor in production area.Included but not currently installed: Live bottom Silo and accessories; 15' Cyclone for silo; 6' Cyclone and stand; large material receiving bin, screw bottom. 24" dia. x 20' long screw auger; 35' heavy-duty shiftless auger; Spare Parts- belts, motors, drives, bearings, special tools for equipment, spare parts

Jim Reedy
800-374-5009 ext:455
Call

$ 95,000

SMW Wood Grinder. Available in Diesel and Electric

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 32,000

SMW MDL SH218D or SH218E Drum Chipper Can be Diesel or Electric

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 12,750

SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER Horizontal Feeder. -- Control Panel. -- Main drive motor: 75 HP - 3,540 RPM; originally 220V but switched to 460 Volt. -- Hammer width approx. 1-1/4" wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel.MANUFACTURER'S STATED KEY FEATURES:&#9679 Heavy-Duty plate construction with replaceable liner plates. &#9679 Heavy-Duty grates available in a variety of sizes. &#9679 Heavy-Duty rotor assembly. &#9679 24" dia. x 3" thick flywheel. &#9679 Built-in fan conveys material up to 50' vertically and 100' horizontally.&#9679 Reversible anvil. &#9679 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: &#9679 Dates to early 1990s. &#9679 The" HZF Series" Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as: Rippings, edging, and trim blocks. Available in (4) standard sizes from 10" to 36" wide.&#9679 Each model features a built-in fan driven off of the main mill shaft, saving energy and valuable floor space while also significantly increasing production.

Bill Christoffersen
800-374-5009 ext:365
Call

$ 9,500

SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER 16 Ft. Horizontal Vibrating Conveyor. -- Motor Controls. -- Main drive motor, 75 HP - 3,540 RPM. -- Hammer width is approximately 1-1/4 in. wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel. -- Factory Frame.MANUFACTURER'S STATED KEY FEATURES:&#9679 Heavy-Duty plate construction with replaceable liner plates. &#9679 Heavy-Duty grates available in a variety of sizes. &#9679 Heavy-Duty rotor assembly. &#9679 24" Dia. x 3" thick flywheel. &#9679 Built-in fan conveys material up to 50' vertically and 100' horizontally.&#9679 Reversible anvil. &#9679 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: &#9679 The HZF Series Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as rippings, edging, and trim blocks.&#9679 Available in (4) standard sizes from 10" to 36" wide.

Bill Christoffersen
800-374-5009 ext:365
Call

$

Schutte model 280.100 Hammer Mill Includes: (2) 125 HP Motors - new 480v and used 575v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand and soft start

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 45,500

SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and features: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately 3" wide Swinging Hammers, tip speed 20,700. --Top feed, bottom discharge. --Bottom screen approximate 5040 square inch area. --Clam shell housing. --500 HP, TEFC, 3/60/460 volt, 1785 RPM drive Motor with coupling and shaft guard. --Mounted on a heavy-duty steel Factory Frame. --NOTES: Largest model of the 15 Series. &#9679 Estimated 2017 year. &#9679 Removal and loading is included. &#9679 Machine weight 16,000 Lbs.

Bill Christoffersen
800-374-5009 ext:365
Call

$ 55,500

SCHUTTE-BUFFALO - AHM-20, ...Hammermill & Pneumatic SystemBuilt around: Components & Features: -- Model "AHM-20" Hammermill with: (2) Approx. 48" dia. x 24" wide Rotors and 600 HP Motor. Each mounted on a frame. --Top feed with Feed Hopper, bottom discharge. --TWIN CITY - Type RBR-SW, size 926; Fan with a 200 HP Motor.NOTES: &#9679 Estimated 2017 YMFG. &#9679 Removal and loading is included.

Bill Christoffersen
800-374-5009 ext:365
Call

$ 37,500

SCHUTTE BUFFALO - Model 1590, ... HammermillComplete with the following features: -- Top Feed, Bottom Discharge. -- 250 HP, 1,800 RPM, Direct drive, electric motor. -- Factory frame mounted.

Bill Christoffersen
800-374-5009 ext:365
Call

$

Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625

 Sturgeon Lake, MN
L & L Sales
218-382-0898
Call

$ 8,500

Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449

 Bushnell, FL
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

$

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.Can be shown under power.

Katie Lechelt
800-374-5009 ext:452
Call

$ 25,950

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

Katie Lechelt
800-374-5009 ext:452
Call

$

SHRED-TECH ST50 DUAL SHAFT SHREDDER With Control PanelSpecifications: -- (2) 20 HP Motors -- 1" Approximate Cutter Width -- Cutting Chamber 20" x 35" -- Control Panel -- Mounted on Stand -- Feed Hopper w/21" x 40" OpeningCan be shown under power

Katie Lechelt
800-374-5009 ext:452
Call

$

SHRED-TECH - ST100, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 50 HP. -- Cutter width: 2" Approx. -- Cutting Chamber: 32" x 60". -- Control Panel. -- Mounted on stand. -- The ST-100 Industrial Shredder is a complex, heavy-duty shredder machine that features a 32” x 60” cutting chamber, which enables it to handle a wide range of products as well as bulky wastes. It can tear through some of the tougher loads, such as wooden pallets, metals, hazardous wastes, passenger tires, and more.Once these products go through our shredder, they end up in a smaller, optimum shred size. It works with a large-duty throughput of up to 3 tons per hour, working much more efficiently for the business

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved