Hogs and Wood Grinders For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 11
208 Results Found
Sort By 
Recently Added Items
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
Vestil HDC-905-IDC
Call For Price
Vestil HDC-905-IDC
Eagle TRU CUT
Call For Price
Eagle TRU CUT
2015 Tana SHARK 440DT
Call For Price
2015 Tana SHARK 440DT
$ 28,900

CRESSWOOD Destroyer HF-40-50 Vertical Hopper Low Noise GrinderSpecifications: -- Approximately 66" x 72" Hopper top opening. -- 42" x 66" Hopper bottom opening. -- 38" Hopper height. -- 50 HP motor operates through gearbox to drive 16" dia. x 40" wide rotor with approx. (63) Knives @ 102 - 151 RPM.Features: -- Steel frame construction. -- Hydraulically-operated pusher ram automatically advances & retracts on continuing cycle pushing scrap into low RPM grinding head. Pusher RAM automatically resets in case of material jams. -- 3 HP Hydraulic unit. Complete with: -- Up-rite material feed (Belt Conveyor); Media Blower; Hydraulic System Power Pack; Safety Railing for grinder platform; stairs for grinder access. Specifications subject to verification. seller can provide video of it operating on request.

Jim Reedy
800-374-5009 ext:455
Call

$ 72,500

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

Mitch Stevens
828-773-6986
Call

$ 44,900

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

Mitch Stevens
828-773-6986
Call

$ 11,500

Cresswood style, 4" thick x 32" wide capacity, electric drive on feed rolls, complete unit ready for production

 Wolcottville, IN
Showcase Equipment
260-250-4645
Call

Call for Price

2014 Diamond Z H4000 TK Horizontal Grinder, Equipped with a Caterpillar C-18 765 HP Turbo Engine. Has 6,900 Original Hours, Wireless Control Remote System, Undercarriage is 95%, Metal Pully on Discharge Conveyor, New Air System to Radiator, New Conveyor Belt ,R-5 Bottom, Ready for Work, Most of hours are Idling, Ready for Work. Weight 85,000 Length 41'5" Weight 10'3" Height 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Los Angeles, CA
NEF Equipment
855-251-2648
Call

Call for Price

EAGLE TRUCK TRU-CUT Tire CutterSpecifications: --The Eagle Tru-Cut tire shear is the economical unit of our tire-cutter series. This patented tire cutting equipment is designed to slice passenger and semi tires into disposable segments.Available as a stationary or portable unit, the Tru-Cut is the no-frills answer for your waste tire reduction operation. --Weight 3,960 lbs --Height 68” --Width 66” --Length 124” --Blade Size 3/4”x 3”x 36” --Max. Tire Capacity Super Single Truck Tire --Average Cycle Time 17 Seconds

Katie Lechelt
800-374-5009 ext:452
Call

$ 475,000

EDGE - VS420, ...Mobile Shredder: ...Less than (1,400) Hours. Features & Specifications: --Year: 2021 -- Make: EDGE. -- Model: VS420. -- Trim: Scrap Processor. -- Hours: 1,350. -- Green Waste Shafts. -- Powered via a CATERPILLAR C9.3B - Tier 4 Final / STAGE V - 310 kW (420 HP) Engine. -- Twin Shaft design provides exceptional intake behavior, less wear, self-cleaning, and prevents material wrapping. -- Intelligent self-protecting control system.Applications -- All types of wood (railway sleepers, pallets). -- C & D (construction & demolition). -- Green waste (including grass, trees, stumps). -- Domestic and household waste. -- Commercial and industrial waste. -- White household goods. -- Paper and cardboard (including paper rolls). -- Mattresses. -- All plastics (including wind turbine blades).

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

EIDAL Model 125 Dual Shaft, Slow Speed High Torque Shredder; 125 HP drive motor; 54"x44 " cutting chamber, cutting disc width approximately 2.5" thick. -- The rotor shafts are directly coupled to the 125HP motor through a heavy duty gearbox, 415 RPM rotor speed. -- Includes: Stand and Hopper. --Power Coupler Buna Spider insert failed and will need replaced.

Katie Lechelt
800-374-5009 ext:452
Call

$ 35,950

EVASHRED EV60E Dual Shaft Shredder with Infeed ConveyorEvashred is a well-known brand of commercial mobile and stationery shredders for solid waste designed and manufactured by F.V. Evans and Sons also known as Evans Engineering.Every type of shredder is designed specifically to shred a particular type of solid waste including Documents, Car & Truck Tyres, E-scrap (Hard Drives, Computers, Printers known as E-waste and e-scrap), Plastic, Foam rubber, Green Waste, Building Waste even Hospital WasteSpecifications: --30 kW / 40 HP Maximum Power --28-30 RPM Cutter Speed Rotation --Width 640 mm x 37 5mm Cutting Chamber Opening

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP.Model: 62-40 HTFeed Opening: 55″ x 38″Outside Dimensions: 130″ x 61″ X 43″Power Unit Dimensions: 96″ x 86″ x 96″ Weight is 20,000 Lbs.Cutter Diameter: 20.5″ at HooksPower Unit Open Loop, Skid MountedElectrical Power 200 HP (2 x 100) Hydraulic Flow 156 GPM; Rated Pressure 3000 PSIOperator initiated pushbutton controls,featuring Allen Bradley PLC Motor controls include primary disconnectwith short circuit protection, full load contactors, and electronic overload detectionControl power is derived from a single-phase transformer.All components are assembled and wired in a NEMA enclosure Heavy Duty Discharge Conveyor and mezzanine Stand

Katie Lechelt
800-374-5009 ext:452
Call

$ 145,000

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

GRANUTECH-SATURN - BIG MAC, ...Used Car Crusher --Hydraulic cylinder completely rebuilt and re chromed --4-71 detroit with maybe 100 hours on a complete rebuild --Runs excellent put a extra set of dollies under it to move around yard --Solid crushing area no holes in floor or back wall. --Needs new tires to make dot mobile we moved on streched lowboy.Specifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up” hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

Katie Lechelt
800-374-5009 ext:452
Call

$ 85,000

GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Loaded onto your truck.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

Katie Lechelt
800-374-5009 ext:452
Call

$ 29,900

HEMPSTEAD - HI E50-72, ...Dual Shaft ShredderShredder for Cardboard.Specifications: -- Motor: 50 HP. -- Opening: 72" x 20". -- Cutters: 3/8" Wide. -- Rebuilt Cutters Sharpened. -- Weight: 6,000 Lbs. -- Loaded onto your Truck.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

HMC - Separator, ...Eddy Current Multi-Separation SystemSpecifications: -- Countering conveyor: 55" x 10". -- Bucket Elevator: 10" x 5'. -- Main motor: 0.37 kW.Equipped with: -- Push button control. -- Carrier with skates.

Katie Lechelt
800-374-5009 ext:452
Call

$ 46,500

HUSTLER - FC-2, ...Glass CrusherSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved