Hogs and Wood Grinders For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 9
167 Results Found
Sort By 
PREMIUM LISTINGS
Arasmith 50 X 101  Hogs and Wood Grinders
$90,000

Model Number: ARASMITH 50X101 TOP FEED SALVAGER HOG PORTABLE UNIT SERIAL: 50-101-HH-1040 CAT 3412 950 HP 3 AXEL TRAILER All is in working condition except the knuckle boom needs hydraulic hoses to the boom, the hog needs 1 set of Hog screens, Hoses are new under the loader cab, $90,000 Contact : Greg Arasmith Arasmith Industries International LLC PH (706) 235-8576 Ex 102 FX (706) 291-1894

Arasmith Industries International, LLC
706-235-8576
Call

Rawlings PXZ, HXZ or VRM  Hogs and Wood Grinders

RAWLINGS MANUFACTURING WASTE WOOD GRINDER. IN STOCK, MANY SIZES AVAILABLE, WEAR PARTS AVAILABLE FOR RETRO FITTING YOUR HOG. CALL 406-728-6182 FOR DETAILS.

 Missoula, MT
Rawlings Manufacturing, Inc.
406-728-6182
Call

2008 Weima WLH Tiger 600  Hogs and Wood Grinders
Call for Price

2008 Weima WLH Tiger 600 Grinder w/1,400 hrs., 60 HP, Extra Bed Knife, Extra Teeth & Bolts, Control Panel & Soft Start Included, 30' of 24" wide Shaker Tray, 10' of Outfeed Conveyor, 1" Screen

 Russiaville, IN
Hollingsworth Lumber
765-883-5836
Call

STANDARD LISTINGS
2002 Allegheny Shredders 30-500  Hogs and Wood Grinders
$44,850

ALLEGHENY COMPLETE SHREDDING SYSTEMShredding System consists of: ALLEGHENY 30-500 SHREDDER -- 75 HP motor -- 30" Wide opening -- 5/8" Shred width -- 12" Crusher paddle -- 97 FPM input speed -- 15 Feet long outfeed conveyor -- 16,000 Working hours on meter.ALLEGHENY 3430-2572 HORIZONTAL CLOSED DOOR BALER -- 25 HP motor -- 7" Cylinder -- Bale size 72" x 30" x 40" -- Bale weight 1,500 Lbs

 MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Call

Allegheny Shredders 16-150C  Hogs and Wood Grinders
$7,800

ALLEGHENY 16-150C PAPER SHREDDER -- 5 HP motor -- 5/8" Strip cut -- Feed opening 16" -- Cutting assembly width 16" -- Exit conveyor included -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2015 Ameri Shred AMS-4000  Hogs and Wood Grinders
$20,000

AMERI-SHRED AMS-4000 20” W Series 3 Strip Cut Industrial Paper ShredderSpecifications: -- Shred width 5/8”. -- Throughput 5,000 - 6,000 Lbs./Hr. -- Speed 107.3 FPM. -- Hour meter reading 3,853 Hours.Equipped with: -- 40 HP Motor. -- 20" W x 6’ L Infeed conveyor with 3” H Side skirts. -- 20” W x 3-1/2’ L Attached discharge conveyor with 4” H Side skirts. -- Precision ground A-2 steel cutters. -- Adjustable wear pads. -- Spur gears run in oil bath. -- CastersIncludes: -- 21” W x 18’ L Freestanding inclined output conveyor with 6” Side skirts & 1-1/2 HP Motor, 208-230/480 V, 60 Cy, 3-Phase, Overall dimensions 216” x 25” x 124” H. -- SIEMENS “P1E18MC250CT” Type P1 18-Circuit Panel Board, Rated 480Y/277V, 3-Phase, 250 A, 4-Wire Configuration. -- Dimensions 136" L x 62" W x 72" H. -- 5,500 Lbs.

 MID ATLANTIC, AL
EX-FACTORY INC.
704-841-2001
Call

2019 Ameri Shred AMS-750  Hogs and Wood Grinders
Call for Price

AMERI-SHRED AMS-750 PAPER SHREDDER -- CROSS CUT TYPE -- Motor 7.5 HP -- Shred width 5/16" -- Feed opening 16" wide -- Capacity 800 to 1.000 lbs per hour -- Conveyor speed 67 feet per minute -- Cutters 4-1/2'' dia. A-2 steel cutters -- Positive overload protection included -- One year warranty

 MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Call

1999 Bandit 3680  Hogs and Wood Grinders
Call for Price

3680 Bandit Grinder, 5100 Hours, 375 HP Engine, Machine has recent Rebuild , Nice

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

1999 Bandit 3680  Hogs and Wood Grinders
Call for Price

1999 Bandit 3680 Horizontal Grinder, John Deere 400 HP Engine (Repower), 5300 Hours, New Bearings, extra screens, Ready to Grind

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

2007 Bandit 2680  Hogs and Wood Grinders
Call for Price

2007 Bandit 2680 Grinder, Caterpillar C11 Engine 385 HP, 3200 Hours, Conveyor, Nice& Clean, Well Maintained

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

2002 Bandit Beast 3680  Hogs and Wood Grinders
$165,000

2002 Bandit Beast 3680 Horizontal Grinder with Cummins 600 HP Engine, 4612 hours, many upgrades, Remote, New Floor Pins, New Compressor Engine, New Discharge Belt, New Augers and Hydraulic Motor, New Drive Belts and Pulley, New, Upgraded Anvil Assembly, 3”x5” Diamond Pattern Screens, Machine Used Daily, Excellent Condition.

Sawmill Exchange
713-729-6455
Call

2008 Bandit Beast 2680  Hogs and Wood Grinders
Call for Price

2008 Bandit Beast 2680 Horizontal Grinder 3000 Hours Tandem Axle Pintle Hook Pull Well Kept Nice Size Great Condition

Mitch Stevens
828-773-6986
Call

Barkhog 2 Head  Hogs and Wood Grinders

Barkhog 2 50 HP 3 phase motors rebuilt when purchased never installed

Pallet Machinery Group
540-644-9220
Call

Bliss Industries EDMF-4840-TFADB  Hogs and Wood Grinders
$28,700

BLISS INDUSTRIES 48” x 40” 300 HP, Vertical Feed, Hammer Mill;Complete with the following components and features: -- Carbon Steel construction with integrated Factory Base Frame. -- Approximately 48" diameter x 40" wide Rotor. -- Approximately 2-7/8" wide x 1/4" thick Swinging Hammers. -- 40" x 10" Inlet. -- Bottom discharge, -- (2) Side access, Air-Swept, Sliding Doors. -- Split screen design with (2) Screen Carriages each side. -- (2) 150 HP, 1785 RPM Motors mounted on opposing ends of the main shaft. -- Motor Couplings and Guards.NOTES: Manufactured around 2003. Removed and ready to load.

Bill Christoffersen
800-374-5009 ext:365
Call

Bliss Industries ED-3848-TFA  Hogs and Wood Grinders
Call for Price

BLISS 38” X 48” 300 HP Hammer Mill; Complete with the following main components and features: -- Rotary Pocket Feeder. --300 HP, 1780 RPM Drive. --Carbon Steel construction with integrated Factory Base Frame. --Approximately 38" diameter x 48" wide Rotor. --Bottom discharge, --(2) Air-Swept, Sliding Doors. -- Split milling compartment with (2) Screen Carriages each. --(128) .25” x 2.5” x 8.1875” Hammers. --Screen Size 24" wide x 50" long. Screen hole size: 7/64” and 8/64”. --Reportedly reconditioned.

Bill Christoffersen
800-374-5009 ext:365
Call

Bliss Industries E 4430 TF  Hogs and Wood Grinders
Call for Price

BLISS Eliminator 250 HP Hammer Mill; Complete with the following major components and features: --Carbon Steel construction with integrated Factory Base Frame. --Approximately 44" diameter x 30" wide Rotor. --(96) Approximate 6" long x 1/4" thick swing hammers. --Bottom discharge. --250 HP, 1780 RPM Motor --Motor Coupling and Guard. --Inlet opening: 29" x 12" --(2) side-hinged, side access doors 30" wide x 52" high. --Bottom discharge. --Approximate 1/8" diameter screen hole size.

Bill Christoffersen
800-374-5009 ext:365
Call

Bloapco C3JK36-3048BVA  Hogs and Wood Grinders
$41,600

BIOAPCO "C3JK38-3048BVA" TOP-FEED SHREDDER -- 30 HP motor -- Infeed opening 48" -- (36) Ripper wheels -- production capacity up to 9,000 lbs

 MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Call

Bloapco 3CXS-3072-BVC  Hogs and Wood Grinders
$35,900

BLOAPCO 3CXS-3072-BVC SHREDDER -- 30 HP motor -- 72" Wide -- CXS Teeth -- Infeed Box Crusher -- Overweight safety plate (dead man plate) on conveyor -- Auto Jog reverse for jams -- Came out running -- Infeed conveyor included -- Loaded on your truck

 SOUTHWEST, AL
EX-FACTORY INC.
704-841-2001
Call

2019 Cam-Wood WX-1502H  Hogs and Wood Grinders
$27,900

CAM-WOOD WX-1502H Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications: Horizontal feed, 20 HP - 1,750 RPM drive motor; 15-3/8" x 2-3/8" infeed chute; 8" dia. air discharge. -- Equipped with: (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 575 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

2019 Cam-Wood WX-4150  Hogs and Wood Grinders
$29,900

CAM-WOOD WX-4150 Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: 1,300 - 4,000 Lbs/Hr, depending on material and moisture content. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved