High Plains Automation Moulder For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
3 Results Found
Sort By 
Recently Added Items
2007 Kentwood M612HD
Call For Price
2007 Kentwood M612HD
Woodstorm LR-500
$18,900
Woodstorm LR-500
1994 Wadkin GA-220
$16,900
1994 Wadkin GA-220
2004 Leadermac LMC-623SP
$29,900
2004 Leadermac LMC-623SP
STANDARD LISTINGS
2019 High Plains Automation LR100-6L  Moulder
$29,950

Lateral chain moulder feeder designed for end-to-end feeding of surfaced wood strips. -- The feeder will accommodate material from 16" to 12'0" long, 3/8"- 3 1/2" thick and from 3/4"- 12" in width, at moulder feed speeds up to 260 ft/min. _ Using state-of-the-art AC inverters domestically produced to handle the rigors of the U.S. market, the LR100-8L eliminates the mess, inefficiencies and excessive power consumption of hydraulic systems. The simple speed adjustment knobs at the operator's panel provides easy, precise and immediate control of the feed works; while delivering constant horsepower and torque throught the wide speed range. -- The feed works of the LR100-8L is further enhanced by using the upper urethane rollers as pinch rollers, while driving only the lower polished steel rollers. This configuration coupled with the superior power of the inverter drive system provides robust clamping and feeding capacities. Additionally, since the urethane rollers are not driven, they enjoy a far superior life and they do not dictate feed speed. (Note: as drive rollers on other feeders wear and get smaller, the system runs slower). -- The machine comes standard with (2) 2" wide urethane rollers and (1) 3/4" wide urethane roller for narrower strips. -- The lateral transport chain deck surface of the LR100-8L is 3'-0" deep x 8'-0" long and has (6) arms of steel table-top chains running over UHMW wear strips for maintenance free operation. A separate motor with inverter drive provides power and speed control to the chains. The chain deck comes standard with our unique on-demand free operation. In this mode, instead of running continuously, the chain deck of the LR100 is controlled by the system's PLC and runs only when a work piece is needed. This pulsing action of the chains holds and feeds the material on the deck in an orderly fashion while still maintaining end-to-end feeding to the moulder. The on-demand mode is further enhanced by a set of operator selected timers which permit feeding of short and random length material without the need for continual operator assistance. For those occasions when continuous running of the chains is desired, a selector switch at the control panel allows the operator to instantly switch from on-demand mode to continuous mode. -- The LR100-8L is delivered to you plug-and-play ready for immediate duty. After alignment to your moulder, simply hook up power and air to the control panel and run. -- A specially programmed PLC controls all operations of the feeder. -- Pneumatic system is shipped complete and ready for use.

Bob Dykstra
800-374-5009 ext:378
Call

2019 High Plains Automation LR100-12L  Moulder
$33,215

Lateral chain moulder feeder designed for end-to-end feeding of surfaced wood strips. -- The feeder will accommodate material from 16" to 16'0" long, 3/8" - 3 1/2" thick and from 3/4" - 12" in width, at moulder feed speeds up to 260 FPM. _ Using state-of-the-art AC inverters and is made in the USA to handle the rigors of the U.S. market, the LR100-12L eliminates the mess, inefficiencies and excessive power consumption of hydraulic systems. -- The simple speed adjustment knobs at the operator's panel provides easy, precise and immediate control of the feed works, while delivering constant horsepower and torque throught the wide speed range. -- The feed works of the "LR100-12L" is further enhanced by using the upper Urethane rollers as pinch rollers, while driving only the lower polished steel rollers. -- This configuration coupled with the superior power of the inverter drive system provides robust clamping and feeding capacities. -- Additionally, since the urethane rollers are not driven, they enjoy a far superior life and they do not dictate feed speed. (Note: as drive rollers on other feeders wear and get smaller, the system runs slower). -- The machine comes standard with (2) 2" wide Urethane rollers and (1) 3/4" wide Urethane roller for narrower strips. -- The lateral transport chain deck surface of the LR100-12L is 3'-0" deep x 12'-0" long and has (8) arms of steel table-top chains running over UHMW wear strips for maintenance free operation. A separate motor with inverter drive provides power and speed control to the chains. -- The chain deck comes standard with our unique on-demand free operation. In this mode, instead of running continuously, the chain deck of the LR100 is controlled by the system's PLC and runs only when a work piece is needed. -- This pulsing action of the chains holds and feeds the material on the deck in an orderly fashion while still maintaining end-to-end feeding to the moulder. -- The on-demand mode is further enhanced by a set of operator selected timers which permit feeding of short and random length material without the need for continual operator assistance. For those occasions when continuous running of the chains is desired, a selector switch at the control panel allows the operator to instantly switch from on-demand mode to continuous mode. -- The LR100-12L is delivered to you plug-and-play ready for immediate duty. After alignment to your moulder, simply hook up power and air to the control panel and run. -- A specially programmed PLC controls all operations of the feeder. -- Pneumatic system is shipped complete and ready for use.

Bob Dykstra
800-374-5009 ext:378
Call

2019 High Plains Automation BAF-12R-SE  Moulder
$54,600

HIGH PLAINS AUTOMATION BAF-12R-SE Lateral Chain Feeder -- Lateral chain moulder feeder designed for end-to-end feeding of surfaced wood strips. -- Will accommodate material from: -- 8' to 16' long, -- 3/8" -3 ½" thick and from -- ¾" –12" wide -- Feed speeds up to 600 ft/min. -- State-of-the-art ac inverters produced to handle the daily rigors of the market allow the BAF to eliminate the mess, inefficiencies and inaccuracies of hydraulics while using only 5 total horsepower (@480volts. The enhanced PLC controls permit effective feeding of random length and resawn material with high operator efficiency. Integral timers allow material to be fed end-to-end, or in a discrete fashion with a desired gap between work pieces. -- This quote also includes a 5' wide Buffer deck to keep the BAF feed deck constantly supplied while eliminating unwanted side loading of work pieces at the fence which can retard the feeding process. The buffer deck is integrated into the BAF operations via the system PLCSystem DescriptionFeedworks -- The driving force of the feeder is an 8 ½" diameter steel roller in the bed of the chain deck directly powered through a heavy duty Cardan-type drive shaft. A 2 HP inverter duty Sumitomo gear motor furnishes superior torque and horsepower and coupled with the intelligence and robustness of the inverter drive system provides unsurpassed capacities for demanding material. The urethane pinch roller is controlled by a laser sensor and adjustable timing device to perform the pinching and feeding action necessary to rapidly feed work pieces end-to-end. The machine comes standard with one 2" urethane roller and one 3/4"" urethane roller for narrower strips. -- A speed adjustment knob at the operator’s panel provides easy, precise and immediate control of the feed works.Chain Deck -- The lateral transport chain deck surface of the BAF is approximately 5’ deep x 12' long and has four arms of stainless steel table-top chains running over UHMW wear strips for maintenance free operation. A one-horsepower gear motor with inverter drive provides power and speed control to the chains. -- The chain deck comes standard with our on-demand operation. In this mode, instead of running continuously, the chain deck of the BAF is controlled by the system’s PLC and runs only when a work piece is needed. This pulsing action of the chains holds and feeds the material on the deck in an orderly fashion while still maintaining end-to-end feeding to the moulder. It reduces side loading pressures while providing superior performance on bowed, warped and resawn material. -- The on-demand mode is further enhanced by a chain deck delay timer which allows the piece being fed to the moulder to completely clear the deck before the next piece is moved to the fence. This smooth and highly reliable feed system permits the feeding of short and random length material while eliminating the need for the operator to straighten mate

Bob Dykstra
800-374-5009 ext:378
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved