Harvesters and Processors For Sale
Category
Harvesters and Processors
136 Results Found
2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready
2014 Komatsu XT430L-2, 8933 hrs., C144 head, Cummins 8.3, auxiliary fuel tank, cab steps, full cat walk, Espar preheater, $229,500
2006 Link-Belt 210 LX Logging Processor Hours 11,263 Equipped with 470 Waratha processing Head Less than a thousand hours on a new hydraulic pump Has big radiator installed Long Pierce built boom Log guarded 18" forestry cab riser Heavy metal roller doors U/C is good Machine and head have been serviced and ready to work. Head has super cut system very fast head knives have all been replaced, machine and head have lots of extras that will go with it.
1000 estimated hours Complete processor, joystick assemblies, monitor, wiring harness, ect.
Call for Price
2014 Ponsse Ergo, 13,860 hrs., 2 speed transmission, Wabasto pre-heater, new batteries, Trelleborg 710-45-26.5 tires at 75%, 2 sets of tracks. all panels/doors/Glass are nice and straight, $189,500
2007 Ponsse Beaver Processor -18000 hours -H6 head operates good same with computer -Tracks and chains -Tires @70% -Tight and dry machine
2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready
Call for Price
2017 Ponsse scorpion king harvester with H7 head, 7800 hours, Very good condition, Woods ready. Minimum weight 47,840 lb Typical weight 50,045 lb Length 316 in Width 104 -121 in Transportation height 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work
2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry
Call for Price
2014 Ponsee Ergo Harvester, 7,300 Original Hours, Refurbished H7 Processor Head, Two Sets of Tracks and Chains, Centers Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc
Call for Price
2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2023 Ponsse Ergo 8wd -26 hours on machine -Tracks come with machine 2 sets are new -H8 head Available as a package deal also for the fowarder in pictures(700 hr)
Call for Price
Ponsse Buffalo Dual Harvester H53 Head New CPU and Wire Harness to boom New trans coupler drive New spare tire and wheel (2) Sets of tracks (80% and 30%)
2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available
2007 PONSEE BEAVER 17,000 HOURS H6 HEAD RECENT HEATER FAN RECENT LENGTH SENSOR WOODS READY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH NO PAYMENTS GRANITEHE.COM
Call for Price
2018 Ponsse Scorpion King Harvester - H7 HEAD Harvester Head with 11,000 hours. Typical weight Scorpion King 49,604 lbs Length 316 in Width 104–112 in Ground clearance 25.8 in Transportation height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.