Woodworking Equipment For Sale

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

BIESSE/ARTECH "SEKTOR": Working Field 169" (4,300 mm) Max. rip cut cap. & 173" (4.400 mm) max. front/back pusher stroke; 2.7" (70 mm) max. saw blade projection; 12 HP (9 kW) main & 3.6 HP (2.7 kW) scoring motor. -- Saw carriage feed speed from 3 - 328 FPM (1 - 100 MPM), return speed of 328 FPM (100 MPM), automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Programmable pusher fence with: (7) Material gripper clamps, gripper clamps open to 2-3/4" (70 mm); 164 FPM (50 MPM) forward positioning speed, 164 FPM (50 MPM) return speed; rack & pinion movement on both sides to assure the pusher remains parallel. -- Operating System: PC Front-end controller, 12" TFT flat touch-screen display with real-time graphics: virtually unlimited program storage via disk drives; function control keypad, USB & RS-232 serial port, CD ROM & 1.44 MB disk drives. --Diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches. -- Complete with: Automatic side aligner & automatic saw blade height adjustment; "PROLOCK" quick-change blade system (4) air support tables 78" x 24" (1,981 x 609 mm) -- Includes: Powered Infeed Roller Conveyor with fork cutouts.

Selco WNT610 Rear Load Panel Saw Biesse Winstore Material Handling System This system is already dismantled by a technician and ready to be shipped. Installation can also be provided.

Selco WNT 200 Rear Load Panel Saw S/N 400.066.94

Ball Milling machine.

SHENG-SHING - SDM-15 ...Wide Belt Sander (Open Ended)15" Single Head Wide Belt Sander with open end for up to 30 " capacity. -- Sanding Head: 15" Wide (30" cap. with 2-pass); 8" Helically Grooved Rubber Covered Contact Roll with 7.5 HP Drive. -- Features: 0" - 6" Part thickness cap., 2-speed conveyor feed 12 or 16 FPM; 16" x 48" Abrasive belts with air tensioning, pneumatic abrasive belt tracking.

SHENG-SHING SDM-25 25" WIDE BELT SANDER1-Head, 24" width cap., rubber covered contact roll, approx. 10 HP motor. -- Abrasive belt size 25" x 48", with air tensioning and electronic abrasive belt tracking. -- 5-1/2" Max. height opening with manual raise & lower; variable feed speed drive. -- Complete with: Magnetic controls & dust outlet.

Shopbot CNC Router

Manufacturers Specifications Motor: 3 HP - Max cutting width: 15 in. - Max cutting height: 8 in. - Cutter Head Type: Helical - Cutter Head Diameter: 3 in. - Min Stock Length: 8 in. - Feed Rate(s): 16, 30 FPM - Table size: 20 in. x 15 in. - Shipping weight: 667 lbs.

Manufacturer Specifications: - Precision-ground cast iron table - Cast iron trunnions - Low-friction composite exension table - T-slot miter gauge - Camlock T-shaped fence with HDPE face - Easy glide fence system - Quick release riving knife and blade guard assembly - Knurled knobs for fine fence adjustments - Device on blade guard allows enabling or disabling of anti-kick-back pawls - Poly-V serpentine belt drive and pulley system - 4? dust port - 2 HP 230 volt

2002 Shun Kuang Machine KP6=230S 6 Head Moulder S/N 020705

1999 Shun Kuang KP6-220S 6 Head Moulder S/N 990536

SICOTTE - T 1050, ...Horizontal Boring Machine 2-Spindle Horizontal Borer.Equipped with: -- 1 HP Motor, timing belt drives with motor starter. -- (2) Horizontal spindles, 2" dia. with Jacobs® Chuck, 0 - 1/2" capacity, turning at 3,450 RPM.Features: -- 4" Boring head stroke with air/oil system and adjustable feed speed. -- Spindle mount on dovetail beam with min. 2" to a max. 11-3/4" center distance.Complete with: -- (2) Pneumatic holddowns & 12" x 16" wooden table size.

SICOTTE - Airbor 700-6, ...Vertical Boring Machine18" x 72" Table; variable air/oil feed table; up to 6" adjustable stroke.Equipped with: -- (3) Vertical 2" dia. spindles with Jacobs® Chuck, 0 - 1/2" cap.; spindles fully adjustable to entire table surface and can be as close as 2" center-to-center; spindle speed of 3,600 RPM. -- (3) 2 HP - 1,800 RPM motors, each motor timing belt drive mounted on a cast iron base with eccentric locking mechanism and a cast iron arm that has 18" of adjustment.Complete with: -- (2) Air loaded holddowns. -- (1) Foot switch for boring cycle. -- Includes Safety shield.

SICOTTE - J 3H-6, ...Vertical Boring Machine24" x 72" Table size, (5) Spindles.Equipped with: -- (3) 1 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindle with set screw locking 1/2" cap. -- (2) Spring-loaded holddowns. -- (1) Additional motor started with overload for future installation of a spindle drive motorFeatures: -- 0" - 8" Vertical table feed, hydraulically operated, variable feed, and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size.Equipped with: -- (6) 1 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (9) 2" Dia. spindles with Jacobs® Chuck, 0 - 1/2" capacity. -- (1) Dovetail beam 2-7/8" x 84" for straight line boring application.Features: -- 0" - 8" Vertical table feed, hydraulically operated, variable feed, and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical control system with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size. Equipped with: -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring collet 1/2" capacity. -- (2) Spring loaded holddowns.Features: -- 0" - 8" Vertical table feed, hydraulically operated; variable feed and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - J-30-4, ...Vertical Boring Machine24" x 48" Fixed table and moving head.Specifications: -- (3) 1-1/2" Spindle with spring collet, 1/2" capacity. -- (3) 2 HP - 1,750 RPM - TEFC Motors, each motor with timing belt drives. -- (2) Spring loaded holddowns. -- Table is fixed while the heads with spindles move hydraulically up & down with an adjustable speed feed (this arrangement can be equipped with an automatic feeding device).Features: -- 0" - 8" Adjustable head stroke. -- Foot pedal activated. -- Vertical stroke and feed speed of the heads with spindles are both adjustable. -- 3 HP Hydraulic variable feed motor, vertical spindle movement; movement can be set to either manual, single stoke, or continuous stroke.

This line has not been run in approx 10 years. The current warehouse/facility may also be available for sale.

Silver Straight Line Rip Saw 15 HP Motor