• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
25 Results Found for Gang Rip Saw Viewing 1 - 20 of 25 results
STANDARD LISTINGS
CAM-WOOD TRS-80F Frame Saw for "Thin Cutting"3/4" Min. to 7-3/4" max. working width; 3/4" min. to 3" max. working thickness; finished material > 0.118.Specifications: -- 0.047" to 0.065" Sawblade thickness; runs up to (16) blades at one time at 400 stroke/Min with a 6.3" stroke length; accommodates blades 1.575" wide x 19.685" long. -- Saw frame is powered by a 20 HP main motor. Feed speeds of 12", 19", and 37 IPM by 1, 1-1/2, and 2-1/2 HP motor. -- Includes Automatic Oil Lubrications system requiring 90 PSI air pressure. Cooling system via water and air.Features: -- Minimum kerf multi blade frame saw designed to maximize production and minimize material loss. -- Thin frame saw design accepts different saw frames & blade combinations. -- Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass. -- Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time. -- Production times are reduced because of the machines durability to consistently produce. -- Saw is engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004" and eliminating the sanding before proceeding to the next step in production. -- All controls are centrally located to permit operator to easily adjust & maintain the machine. -- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043" ~ 0.055"). -- The rigid saw blades frame is available in different configurations. -- A special air blast system that cooling the blade for longer service intervals & removes saw dust from the gullet of the blade for reduce temperature and increase blade life.
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD TRS-2120 Heavy Duty Dip Chain Gang RipsawThe TRS-2120 Rip saw is manufactured to precise tolerances, and features the newest designs for operator safety and volume production.Features: -- 50" x 68" Cast Iron frame for perfect stability. -- Straight line caterpillar type feed chain with heavy guides; chain blocks made of special cast iron, heat treated & precision ground pins. -- 70 mm Nickel chrome steel saw arbor with double keyed quick change sleeve. -- Precision fence for absolute accuracy between blade & fence, with precision measuring gauge. -- (3) Sets of anti-kickback fingers, (2) top, (1) bottom. -- Powered rise & fall of the pressure rollers -- Automatic centralized lubrication system, automatic Star-Delta starter (slow speed start), and low voltage controlsSpecifications: -- 6-5/8" Max. thickness; min. length 29"; 13-1/2" usable saw sleeve length; 13-1/2" between outside saws. -- Throat depth (max. distance to the right of the 1st blade is 12") 10" to 18" sawblade dia.; 70mm saw arbor with (2) keyways. -- 75 HP saw arbor motor with belt drive to the 2,600 RPM with powered pressure rollers (rise/fall); 8 to 80 FPM feed speeds via 4 HP feed motor. -- Double anti-kickback fingers mounted at the in-feed side provided maximum safety protection. -- Variable feed speed to match different requirement of material. -- V-way track and chain block surface are heat-treated for long wear resistance. -- Automatic lubrication to V-Way track facilitates chain running smoothly. -- The auto lubrication device is equipped with an alarm that sends signals upon a lack of lubrication oil. -- Precision built saw head assures accuracy for straight line rip saw operations. -- Four bearing spindle mount ensures rigidity & long life. -- (4) Pressure rollers & (2) hold-down plates for precise cutting of large and small work pieces. -- (10) V-Belt ARBOR DRIVE ensures maximum motor output and guarantees heavy duty multiple rip cutting. -- The saw arbor is manufactured form NI-Cr-MO alloy steel for durability, heat treated, precision ground, balanced providing precise cutting performance. -- Adjustable guide rollers make cutting straight for slight radials material. They also secure glue joint on short pieces or long stacks.
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD XL 300 Dip Chain Gang Rip Saw: 12" Width cap.; 4-3/4” max. cutting depth; 14” min. stock length;Specifications: -- 70 mm Dia. saw sleeve (one is included) with (2) keyways and the following spacers: (4) 15 mm, (4) 10 mm, (18) 1 mm, (10) 0.5 mm, and (8) 0,25 mm (see drawing after the "literature link); with 12” useable cutting width. -- Accepts saw blades from 12” to 14” dia.; arbor is powered by a 50 HP motor driving the spindle at 3,200 RPM. -- Feed chain is powered by a 2 HP motor with variable chain speeds from 30 to 100 FPM; feed chain is 12” wide. -- Table is 30” wide x 62” with 12” between the column and the 1st saw blade. Integrated 6” dia. dust extraction connection.General Description: -- Designed for high quality production line use. CAM-WOOD’s Rip Saws are manufactured to precise tolerances and feature the newest designs for operator safety and volume production. -- Precision fence ensures absolute accuracy between blade & fence, equipped with measuring ruler gauge. -- Double anti-kickback fingers mounted at the infeed side provide maximum safety protection. -- Heavy-duty industrial motor for powerful cutting capacity. -- Ruggedly constructed cast iron frames for durability usage.Feed System: -- Variable feed speed enables the machines to meet different requirement of work. -- V-way track and chain block surface are heat-treated for long wear resistance. -- Automatic lubrication to V-Way track facilitates chain running smoothly. -- Auto lubrication device is equipped with an alarm that sends signals upon a lack of lubrication oil to increase the durability of the machines. Features & Equipped with: -- Precision built saw head ensures accuracy for straight line rip saw operations. -- (4) Bearing spindle assembly ensures rigidity & long life. -- (4) Pressure rollers & (2) hold-down plates for precise cutting of large and small workpieces. -- 10-Piece V-Belt for maximum motor power output and guarantees heavy duty multiple rip cutting. -- The saw arbor is manufactured from NI-Cr-MO alloy steel for durability and anti-fatigue, heat treated, precision ground and balanced providing precise cutting performance. -- Adjustable guide rollers make cutting straight or slight radials rip cuts. They also firmly secure lumber to the feed chain for glue joint work on short parts or long lumber. Options when ordered with machine: -- Additional saw sleeve, ...$990 -- Power raise & lower of the holddown system when ordered with the machine, ...$1,500
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CANTEK MODEL MRS-610M-4 GANG RIPSAW WITH (4) SHIFTING BLADES: -- (4) Shifting Blades and 4.2" Max. cutting thickness without pressure plate, 3.7" with pressure plate; 24" Max. cutting width; 35.4" Max. material width of pass-through; 60 HP Saw motor (larger optional); 2.8" (70mm) Saw arbor diameter turning at 3800 RPM; 12" Min. or 14" max. Sawblade diameter; 2.8" (70mm) Sawblade bore when mounted directly on shaft, 3.5" (90mm) when mounted on saw sleeve; 5 HP feed motor with variable feed speeds from 25 to 200 FPM; 1/2 HP pressure roller raising motor; 24" Min. stock length; 31.9" Min. stock length with board under (2) rollers. -- FEATURES AND BENEFITS: -- The main frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stability -- Nickel chrome steel saw arbor with 70 mm OD double keyed quick removal sleeve -- Heavy duty precision straight line feeding caterpillar chain type -- Feed chain with easily replaceable bolt in cast steel or urethane pads - optional -- The top pressure roller system is electronically positioned from the front control panel with regards to lumber thickness with position readout. -- Top roller hold down system is mated to the servo positioning short stock shoe providing optimum straight line ripping performance and comprehensive safety. -- Pneumatic pressure (infinitely variable) to the holddown feed rollers provides better control of the lumber -- Nickel chrome steel saw arbor -- Variable feed speeds of 16'-200' min. (5-60m/min) via an inverter motor and speed control with led readout -- Electronic overload sensing system is integrated to the inverter feed system providing automatic speed reduction under heavy amperage load -- New - short stock cutting device included -- Digitally controlled lubricator for chain -- Centralized lubrication system -- (2) Powered top & bottom outfeed rollers are a standard feature. The powered roll system facilitates positive flow of the stock through the gang saw and onto outfeed conveyors or transfers -- (3) Rows of anti-kickback fingers -- Telemechanique - automatic star-delta starter (low amperage soft-start) and low voltage controls -- Controls are mounted on the saw for easy convenient machine operation -- Includes 12' infeed table -- Gang saw sleeve is optional extra -- Electrics to 230/460 or 575-volt, 3-phase, 60-cycle to UL/CSA standards -- Complete Shifting Fence Infeed Tables and complete Outfeed Sweep Systems, handling decks and Stacking Systems are available. -- Options available: -- Add for 75 Hp Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- 100 HP Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- 125 HP Saw arbor motor in lieu of 60 HP - including Wye-Delta low amp Starter -- Short Stock Feeding device (min. length 12" - must use 12 blades for max. thickness of cut of 2.16" (55mm) -- 20MW Laser (FP MLC1320W) & Laser Holder w/12" Bolt on Base-Stand -- As above but w
Equipment Location:WESTERN CDN
Jeff Terrill
800-374-5009 ext:349
CANTEK MODEL MRS-175 6.9” THICK CUTTING HEAVY-DUTY GANG RIPSAW: -- FEATURES: -- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations -- Precision chain and rails (dip chain) system facilitates straight line cutting -- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality. -- Motorized saw arbor and thickness adjustment for operator convenience. -- Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood. -- A digitally controller lubrication unit is provided to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically. -- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically. This prevents the potential damaged to the saw arbor and/or blades and also prolongs blade life up to 20%. -- Variable feed speed adjustment by frequency inverter from the front of the machine. -- SPECIFICATIONS -- Max. cutting thickness, 6.9” -- Max. cutting width, 13-3/4” -- Fixed inside blade to column, 14.9” -- Min. working length, 27-1/2” -- Max. saw blade diameter, 14” to 18” -- Sawblade bore, 70 mm or 90mm – double keyed -- Saw arbor diameter, 70 mm without sleeve - 90mm with sleeve -- Saw arbor speed, 2500 RPM -- Saw arbor motor, 125 HP (150 HP optional) -- Saw arbor elevation motor, 1/2 HP -- Feed motor, 3 HP (5HP optional) -- Variable feed speed, 8 – 80 FPM (higher speed optional) -- Powered raise & lower of rolls, 1/2 HP -- Dust hood dia., 8” -- Table height (pass line), 29.3” -- Electrics – to UL/CSA standards 230/460 or 575-volt, 3-phase, 60-cycle -- Table area (L x W), 72.4” x 31.1” -- Overall dimensions (L x W x H), 95.5” x 90.5” x 63”, Net weight 6,600 lbs. -- OPTIONAL EQUIPMENT: -- 150 HP Main Motor in lieu of 125 HP -- 90mm OD Saw Sleeve for above Saw -- Laser Light, 20mw with Mounting Bracket -- Saw Blade dia. 16” + 6 Wiper for ripping 6" (155mm)6 high --Saw Blade dia. 18” + 6 Wiper for ripping 6-3/4" (170mm high) -- Sleeve Support Unit for Unloading/Loading Sleeve & Blades
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
COSMEC "SM 12O" Gang Rip Saw; -- 11-7/8" Arbor cap., 50 HP arbor motor, 3-1/2" max. cutting height, 23" min. board length; 50 mm dia. - 3,700 RPM arbor, 10" min. to 13-3/4" max. blade diameter. -- 12-5/8" Wide feed chain, 2-speed feed motor 0.8 HP & 1.2 HP with inverter controlled variable feed speed for each motor speed range, 13 - 40 FPM and 26 - 80 FPM. -- 1 HP motorized opening of the pressure roller assembly. Complete with: --(4) Rows of anti-kickback fingers, chain lubrication
Equipment Location:NORTHEAST
Jeff Terrill
800-374-5009 ext:349
DIEHL 990 GANGRIP SAW Product No. 9507689 75 HP - 3600 RPM arbor motor-AB size 4 starter-110 volt controls 12 " arbor width with 3-1/2" maximum thickness 8 roll feed - 4 top (powered) - 4 bottom Anti-kick back fingers : top and bottom One (1) saw cartridge-2 3/4 " saw blade bore New arbor bearings 5 HP feed: single speed Rip fence Outboard bearing on arbor 3" throat capacity to 1st saw blade Cleaned, painted and checked Serial # : 54174 Machine Type: Rip Saw / Gangrip Manufacturer: Manufacturer Unknown Model: 990 Year: 1958 Machine Location: South East
Equipment Location:South East, NC
Keith Comeau
704-929-9122
LEADERMAC MODEL LMC 1600M - 63” GANG RIPSAWS -- SPECIFICATIONS: -- Working width: 0.6” – 51” or 63” -- Working thickness: 0.4” – 4” thick -- Up & down motor for pressure head: 1 HP -- Feed motor: 7-1/2 HP with VFD -- Saw spindle: 100 HP. Options for larger motor -- Saw spindle diameter: 80 mm (3.15”) double keyed -- Spindle speed: 4,000 RPM --Saw blade diameter: Up to 14” blades for 4” depth of cut --Feed speed, infinitely variable: 20 – 50 FPM (to 100 or 200 FPM optional) -- STANDARD FEATURES: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with Hydro-Loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision saw setting & changing -- NOTE: A customer who owns a LMC 1600 HD Rip Saw reports that it takes them 7-minutes to completely change out an arbor i.e. taking out the dull saw arbor and replacing with a sharp saw arbor -- Hardened & hard chromed infeed table -- (7) Top power driven rolls – full width -- (5) Bottom power driven rolls – full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are all driven by Cardan shaft drive with HD gearboxes, interconnected -- Feed Roll Arrangement: 1st top & 1st bottom powered rolls followed with (2) full width rows of anti-kickback finger units and then the remainder of powered top & bottom feed rolls -- 7-1/2 HP HD VFD, infinitely variable feed system -- Main motor has Wye-Delta low amperage soft start -- Electrics are 230, 456 or 575-volt, 3-phase, 60-cycle with all controls to CSA/UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box (electronic version on request) -- (4) Top & (4) bottom 6” dust hoods included -- Saws, dado heads, cutterheads, and spacers optional extra -- PRICE: -- LMC-1600M-63” Wide x 4” Thick Rip Saw complete, $ 148,950.00 -- OPTIONS INCLUDED IN PRICE: -- 100 HP saw spindle motor -- Moveable main electrical panel with 10’ of main cable -- 4” thickness capacity using 14” blades -- Hanging control panel in lieu of control std. as shown in machine photo -- Increased feed speed to 200 FPM for 2” thick or to 100 FPM for 4” thick material. Includes heavier gearboxes and drive components, in lieu of standard 50 FPM and 7-1/2 HP VFD -- AVAILABLE OPTIONS WHEN ORDERING A NEW MACHINE: -- Variable frequency drive brakes -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 51” wide machine, add $ 17,250.00 -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 63” wide machine, add, $19,275
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
LEADERMAC MODEL LMC-1300M – 51” & LMC 1600M - 63” GANG RIPSAWS Specifications: -- Working width: 0.6” – 51” or 63” -- Working thickness: 0.4” – 4” thick -- Up & down motor for pressure head: 1 HP -- Feed motor: 7-1/2 HP with VFD -- Saw spindle: 100 HP - Options for larger motor -- Saw spindle diameter: 80 mm (3.15”) double keyed -- Spindle speed: 4,000 RPM -- Saw blade diameter: Up to 14” blades for 4” depth of cut -- Feed speed, infinitely variable: 20 – 50 FPM (to 100 or 200 FPM optional)Standard Features: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with Hydro-Loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision saw setting & changing -- Hardened & hard chromed infeed table -- (7) Top power driven rolls – full width -- (5) Bottom power driven rolls – full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are all driven by Cardan shaft drive with HD gearboxes, interconnected -- Feed Roll Arrangement: 1st top & 1st bottom powered rolls followed with (2) full width rows of anti-kickback finger units and then the remainder of powered top & bottom feed rolls -- 7.5 HP HD VFD, infinitely variable feed system -- Main motor has Wye-Delta low amperage soft start -- Electrics are 230, 460 or 575-Volt, 3-Phase, 60-Cycle with all controls to CSA/UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box (electronic version on request) -- (4) Top & (4) bottom 6” dust hoods included -- Saws, dado heads, cutterheads, and spacers are optional not incl. in pricePRICE: LMC-1300M-51” Wide x 4” Thick Gang Rip Saw, complete, ...$132,850Options included in Price: -- 100 HP saw spindle motor -- Moveable main electrical panel with 10’ of main cable -- 4” Thickness capacity using 14” blades -- Hanging control panel in lieu of control std. as shown in machine photo -- Increased feed speed to 200 FPM for 2” thick or to 100 FPM for 4” thick material. Includes heavier gearboxes and drive components, in lieu of standard 50 FPM and 7.5 HP VFD.AVAILABLE OPTIONS WHEN ORDERING A NEW MACHINE: -- Variable frequency drive brakes -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 51” wide machine, add ...$17,250 -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 63” wide machine, add ...$19,275 -- 125 HP saw spindle motor -- 150 HP saw spindle motor -- Rear fence adjustment from the front of the machine with digital position readout -- Saw spacers for
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
LEADERMAC MODEL LMC-900M 36” WIDE HEAVY DUTY ROLL FEED RIPSAW COMPLETE: -- Specifications: -- Working width: .6” – 36” -- Working thickness: .4” – 2”. Optional to 4” -- Up & down motor: 1 HP -- Feed motor: 7.5 HP with VFD -- Spindle HP: 75 HP - larger on request -- Spindle diameter: 80 mm (3.15”) double keyed -- Spindle RPM: std. 4,000 RPM. Optional to 5,000 RPM with 10” blades -- Saw blade diameter 10” (250mm) std. Optional to 14”( 350 mm) diameter -- Feed speed, infinitely variable: 20 – 50 FPM. Optional to 100 or 200 FPM -- Standard features: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with hydro-loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision sawblade setting & changing -- NOTE: A customer who owns a LMC 1600 HD rip saw confirmed that it only takes 7-minutes to completely change out an arbor i.e. Taking out the dull saw arbor and replacing it with a sharp saw arbor -- Hardened & hard chromed feed tables -- (7) Sets of full width top power driven rolls full width -- (5) Sets of full width bottom power driven rolls, full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are driven by cardan shaft drive with hd gearboxes interconnected -- 1st Top & 1st bottom powered roll combination and then (2) rows anti kick back finger units. Fingers are full width and then to the rest of the powered top & bottom rolls which provide the best feeding capability with good safety features -- HD VFD, 7-1/2 HP infinitely variable feed system -- Main motor has wye-delta low amperage soft start -- Electrics are 230, 450 or 575 volts 3/60 with all controls to CSA & UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box -- (4) Top & (4) bottom 6” (150mm) dust hoods included -- Tool box -- Saws, dado heads and/or cutterhead(s) and spacers optional extra -- Options Include: -- Hanging control panel in lieu of control std. Setup as shown in the machine photo (value $890) -- Moveable main electrical panel with 10 ft. (3m) of main cable (value $ 645) -- Amp meter for the arbor motor -- Available Options: -- To 3” thickness capacity using 12” dia. Blades, p.o.r. -- 3” or 4” thickness capacity – using 14” dia. Blades..$ p.o.r. -- To 100 FPM top feed speed – infinitely variable to 4” thickness -- 200 FPM top feed speed – infinitely variable to 2” max. Thickness -- 100 HP saw spindle motor -- 125 HP saw spindle motor -- 150 HP saw spindle motor -- Front and/or rear side head (10 HP-std) in front of the saw arbor (please discuss if interested in this) -- 15 HP or 20 HP side head motor(s) in lieu of 10 HP -- Adjustment of the rear gu
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
LAUDERDALE-HAMILITON 72" RFPR Panel Gang Rip Saw; Roll Feed -- This machine will cut a bundle (42 sheets) of 4' x 8' x 3/4" plywood or OSB into narrow strips in (4) Min or less. -- 40 HP main arbor motor; 1/8" min. - 1-1/4" max. material thickness; 10" dia blade; 3-15/16" dia. arbor with 72" of usable width cutting capacity, min. panel length 30"; 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers; fixed feed speed of 80 FPM. -- Blades & collars: Thin kerf 10" dia x 40-tooth x 4-3/16" bore non-split blades (blades not included) with quick & easy setup for fast blade positioning/removal. Blades & collars are sold separately & not included in the machine price; 10" dia. x 40-tooth thin kerf blades, please add ...$ 100 ea.; 1-1/4" wide x 4-3/16" bore blade collars, add ...$ 120 each. -- Complete with:(2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM.Available Options at additional cost: -- Assortment of blade thicknesses & diameters -- 110 V Infeed Scissor Lift with foot pedal controls or automatic up-indexing -- 110 V Outfeed Scissor Lift with automatic down-indexing; -- Split blade & collar system -- Main motor power from 30 - 75 HP.Depending on application: -- 4" Max. cutting height (requires 75 HP motor) -- Variable speed feed -- Non-marking Polyurethane contact feed rollers -- Additional arbors -- "QUICK CHANGE" arbor system (see video). -- "Pigtail" quick change Crosscut Saw System. -- Actual Model is LHI RFPS-72/10 Roll Feed Panel Saw. NOTE: 100" Width capacity machines available - call or email for details.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
LAUDERDALE-HAMILITON MODEL MBR-10 ROLL FEED GANG RIPSAW: -- Saw arbor with 25 HP arbor motor (30 HP and 40 HP available, see Options for pricing). -- 1-15/16" Saw arbor bearings and 10" usable arbor. 12" useable arbor available. Uses 12" dia. x 1-3/4" bore saw blades. -- 1/8" to 2" Max. cutting depth on hardwoods and softwoods; 18" minimum stock length; 17" maximum stock width; removable and replaceable phenolic throat plates. -- Unique “swing down arbor frame” for easy and fast blade changing. Blades positioned using spacers. Feed system with: -- (2) 1 HP Feed motors with constant feed speed to be determined from thickness of wood, type of wood, and maximum number blades (average speed is set at 80 FPM). -- (6) Non-marking steel drive rollers; top and bottom rolls are powered for superior feeding capabilities; hand crank for easy feed roll height adjustment. -- Includes safe, fully enclosed belt and chain guards and double anti-kickbackFeatures: -- Simple design, low cost, high performance. -- High production, fast setup, workhorse. -- Off-The-Shelf Parts found locally for ease of maintenance.OPTIONS: -- 30 HP arbor motor & starter, add $1,000 -- 40 HP arbor motor and starter, add $2,000 -- Variable Speed Drive with speeds from 10 to 100 FPM, add $2,150 -- 12" useable arbor space, add $2,500 -- 12" x 24T Blade,1.75" Bore, $115 each -- 12" x 30T Blade,1.75" Bore, $135
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
LAUDERDALE-HAMILTON RFPR 72/12 "HEAVY DUTY" MULTI-BLADE PANEL SAWSpecifications -- (1) 50 HP main arbor motor for 1/8" min. - 2" max. material thickness; 12" Dia max. blade capacity with 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers with (8) Polyurethane drive rollers; variable feed speed to max 80 FPM. -- (1) "Quick Change" arbor cart trolley and blade box for 9 1/2" cutsOn average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.Available Options: -- Blade Box Arbor Cart and Trolley $ 12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $ 700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $ 3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $ 14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $ 16,390.00 eachTooling Cost: -- Carbide Tip Blades 12" x 40T x 4 3/16 bore with TCG and 3 pin holes $ 125.00 each -- Saw Blade Tooling Collars $ 125.00 each -- Actual Model is LAUDERDALE-HAMILTON RFPR "HEAVY DUTY" 12 Panel Rip Saw
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
LAUDERDALE-HAMILITON MBR Roll Feed Gang Ripsaw: Specifications: -- Saw arbor with 40 HP arbor motor -- 1-15/16" Saw arbor bearings and 7-1/2" usable arbor. Uses 12" dia. x 1-3/4" bore saw blades. -- 1/8" to 2" Max. cutting depth on hardwoods and softwoods; removable and replaceable phenolic throat plates. -- Unique “swing down arbor frame” for easy and fast blade changing. Blades positioned using spacers. Feed system with: -- (2) 1 HP Feed motors with constant feed speed to be determined from thickness of wood, type of wood, and maximum number blades (average speed is set at 78 FPM). -- (6) Non-marking steel drive rollers; top and bottom rolls are powered for superior feeding capabilities; hand crank for easy feed roll height adjustment. -- Includes safe, fully enclosed belt and chain guards and double anti-kickbackNote the Features: -- Simple design, low cost, high performance. -- High production, fast setup, workhorse. -- Off-The-Shelf Parts for ease of maintenance.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON MODEL 424 Dip Chain Gang Ripsaw -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
MEREEN JOHNSON 424 DC Multiple Blade Rip Saw:24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat.Equipped with: -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain: 3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff.Complete with: • (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, height adjustment with scale & pointer reference; anti-kickback finger system with (1) lower & (2) upper on infeed.• (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood, requires 3,820 CFM
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
NEVA ORBIT PLUS Thin Cutting Frame SawFor cutting solid wood blocks into glueable slats with a minimum of saw kerf waste.Features & Operation: -- ORBIT uses an up/down method of movement for cutting veneer slats; unlike conventional Frame Saws that move up & down in a reciprocating lineal motion, ORBIT uses a swing-out motion at the bottom of the saw stroke. -- During the downstroke of the saw frame, the cutting motion is perfectly linear; at the bottom of the stroke, the saw frame swings out of the cut in the same direction as the wood is moving. -- Once the saw frame has retracted out of the cut, the frame travels back to the top, remaining out of contact with the wood during the entire upward motion. The saw frame then again begins its linear downward cutting motion. -- This unique movement has several distinct advantages of the frame movements over the conventional frame saws. In a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. -- This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. -- Because the Orbit saw frame moves out of the cut during the upstroke, wood chips and sawdust falls clear from the saw blade resulting in less heat buildup on the saw blade, longer saw blade life, dust-free slats, and the ability to use a thinner kerf saw blade. Technical Data: -- Main Motor is 15 kW (20 HP), feed speed from 0.3 - 1.5 MPM (1 - 4.5 FPM), 210 mm (7/8") strokes of the Saw Frame, (450) strokes/Min. -- Cutting Height: Adjustable from 45 - 200 mm (8" max. height), cutting width with center guide is 2 x 25 mm to 70 mm (2-3/4"); min. block length of 300 mm; min. slat thickness of 2.5 mm (depending on cutting height). -- Cutting Accuracy: Approx. +/-0.2 mm; saw kerf is 1.25 at 4" or less 1.35 at 4" or more; saw blade LIFE-STELLITE Saws with approx. (10 - 60 Hrs). -- Dust Hood dia: 120 mm top x 160 mm bottom; machine dimensions are 2,600 mm L x 800 mm W x 1,700 mm H 102" x 31-1/2" x 67"); approx. machine Weight of 3,300 kG or 7,000 Lbs. -- Comes with: (2) Sets of frames for 6" material; (2) frames for 4" material; (1) precision torque wrench (200 Nm); adjustable chip breakers; (1) air blast system. -- Includes: Automatic opening of the machine for frame removal, automatic central lubricating system, automatic raise & lower of the feed rollers, top & bottom driven feed rollers, and digital feed speed indicator. Owner reports the following: Wear bars are all good and machine got a recent new clutch and brake -- Sale includes many spare blades, a frame holder for setup or teardown of frames, (4) frames, several existing setups for different thickness of finished products and many spare parts both new and used. -- Saw used exclusively for sawing 2” x 6” western red cedar.
Equipment Location:ATLANTIC CDN
Jeff Terrill
800-374-5009 ext:349
NORTHTECH NT-MAR350-M2 Gang Rip Saw with Moveable Blades;Excellent condition Gang Rip Saw with (2) moveable blades and (1) fixed blade. -- Capacity: 13.38" Max. to 0.59" Min Width cap by 4" cutting depth on (2) moveable blades and 4.33" depth on (1) fixed blade. 14" Max. blade dia. -- Drives: Blade is 3,800 RPM. Main arbor motor is 50 HP, 1,720 RPM, TEFC TECO-Westinghouse continuous duty. -- Depth of cut adjustment with 1/4 HP motor for power raise and lower for thickness adjustment. Approx.10" min. stock length. -- Feed System: 3 HP Inverter Variable speed feed motor with feed speeds from 15 to 115 FPM. Features overload sensing protection whereby if saw is overloaded, ie. feed speed is too fast etc. the auto sensing device will reduce feed rate up to 75% -- Features: Servo Positioning of (2) moveable outside blades. Movement accomplished by electric servo motors and control mated to a precision CNC style ball-screw. Saw blades are on a moving shoe/clamp system integrated into the same servo placement system. Position system is accurate to 0.005" accuracy. -- Programmable controller provides preselected cut bill and self diagnostics. Moveable Blade Actuation: Program selection, as well as outside moving blades and laser are fully operational via joy stick control. -- Construction: Cast iron base and table. Precision ground and specially heat treated chain transport pads, mated to a proprietary rail system providing optimum wear and precision straight line rip capability. Proper tooling for glue line application can be supplied by NORTHTECH. -- Includes 30 mw Laser, (2) upper and one lower dust hoods. (3) Hydro-Collars and 14" blades.Note that moveable blades can be fixed blades by removing the shoe/clamp and using manual spacers as usual.
Equipment Location:MID ATLANTIC
Jeff Terrill
800-374-5009 ext:349
RAIMANN KR 310 M Multiple Rip Saw System 12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with: -- Quick Fix arbor with: (2) Movable blade and (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler fo guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. -- Raimtech E5 with TimberMax Software optimizing software; makes it possible to get the most out of incoming lumber. The software optimizes rips for width or grade. TimberMax calculates the most profitable ripping solution for each board at which time shifting saw blades are positioned automatically. Infeed includes a infeed belt conveyor with pressure roller. Infeed is mounted on slide that automatically adjusts the board in the best position before entering the saw. Conveyor is 24" wide X 120" long.Cutting Specifications: -- Cutting depth with 12" Dia. saw blades, 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed, 16 - 158 FPM, feed drive 2 HP motor.Features: -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.
Equipment Location:EASTERN CDN
Jeff Terrill
800-374-5009 ext:349