Sawmill Equipment For Sale

Air Compressor (110) Airlock (18) Band Chopper (1) Band Mill Thin Kerf (26) Band Mills (Wide) (24) Banding-Strapping Machines (81) Blowers and Fans (106) Boiler (12) Bolter Saw (1) Carriage (Sawmill) (40) Carriage Drive (Sawmill) (37) Chip Bin (15) Chip Cyclone (5) Chip Screen (25) Chipping Canter (1) Chop Saw (29) Circular Saw Husk (9) Circular Sawmill (64) Conveyor (59) Conveyor-Auger (4) Conveyor-Live Floor (5) Conveyor-Run-Around (1) Conveyor-Vibrating (70) Conveyors Belt (180) Conveyors Board Dealing (61) Conveyors Decks (Log Lumber) (191) Conveyors General (27) Conveyors-Barn Sweep (16) Conveyors-Live Roll (127) Debarker (56) Dip Tank (6) Drum Dryer (13) Dry Kiln (12) Dump Hopper (12) Dust Collection System (218) Edger Tailing Device (2) Edgers-Board (56) Edgers-Gang (36) Edgers-Slab (2) Edgers-Vertical (5) Electrical (106) Forklift (46) Gang Rip Saw (35) Gang Saw (38) GenSet (54) Hammer Mill (3) Hogs and Wood Grinders (132) Hydraulic Power Pack (67) Knife Grinder (26) Laser Lights (5) Log Home Machinery (3) Log Irrigation (2) Log Merchandising System (14) Log Turner (Sawmill) (23) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (20) Misc (61) Operator Cab (7) Package Saw (6) Portable Sawmill (27) Post and Pole Peeler (22) Power Units-Engines (11) Radial Arm Saw (3) Resaw-Band (137) Resaw-Circular (2) Scissor Lift (36) Scragg Mill (28) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (89) Shavings Bagger (4) Shavings Mill (28) Slab Saw (2) Stake Pointer (2) Stave Quartering Saw (1) Tie Processing (4) Trimmer (71) Unscrambler (33) Wheel Loader (62) Wood Chipper - Stationary (112) Wrap and Packaging (10)

Filtering

Reset All 

thru
 Used     New
Viewing Page 145 of 145
2886 Results Found
Sort By 
Recently Added Items
2014 Morbark 640-Morbark
$125,000
2014 Morbark 640-Morbark
Unknown 30ft x 36in
Call For Price
Unknown 30ft x 36in
Pendu Mfg Hewing
Call For Price
Pendu Mfg Hewing
Rens 44in
Call For Price
Rens 44in
2019 Zaffaroni MLS 130 P  Gang Saw
$95,000

ZAFFARONI MLS 130 P PD MULTI-BLADE PANEL SAW: -- SpecificationsZaffaroni is the Top of the Line in Precision Multi Rip saws for Panels. Blade Depth is mechanically adjustable with a tolerance of =- 0.01 mm (0.0004"). The saw is so precise it can also be used for "V" grooving. The Saw blades project through the table from below. A double row of hold down wheels are mounted above the saw, with 24 adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width 1300 mm (51-1/8") -- Min. Panel Length 300 mm (11-7/8"). -- Motorized thickness adjustment from 0 - 70 mm (2-3/4"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1- 5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm diam. (11"). -- Working Table Height 1120 mm (44"). -- Transport Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power 37 KW (50 HP) with Belt Drive. -- Saw Blade Spindle 80 mm x 1310 mm (3-1/8: x 51-1/2"), with double tangs and automatic anti-rotation locking clutch. -- Spindle Speed 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC logic control with digtital communications through bus cable.Spacer Sets: Machines require Spacer Sets and Saw Blades (not included) and pricing is available on request.

Bob Bullin
800-374-5009 ext:346
Call

2019 Zaffaroni MLS 160 P  Gang Saw
$89,500

ZAFFARONI MLS 160 P MULTI-BLADE PANEL SAW: -- SpecificationsZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004"). The Saw is so precise it can also be used for V-Grooving.The Saw blades project through the table from below. A double-row of holddown wheels are mounted above the Saw, with (24) adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width is 1,600 mm (63"). -- Max. panel pass through is 1,780 mm (70"), min. length is (320 mm) 12-5/8". -- Motorized thickness adjustment from 0 - 70 mm (2-3/4"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1-5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm dia. (11"). -- Working table height is 1,120 mm (44"). -- Material Feed Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power is 55 kW (74 HP) with Belt Drive arbor. -- Saw Blade arbor 80 mm dia. x 1,310 mm (3-1/8" x 51-1/2"), with double-tangs and automatic anti-rotation locking clutch. -- Blade Arbor Speed of 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC Logic control with digtital communications through bus cable.Spacer Sets: Machine requires Spacer Sets and Saw Blades (not included); pricing is available on request. Examples:width from......1 - 10 mm ...$ 25.45width from.....11 - 25 mm ...$ 30.15width from.....26 - 50 mm ...$ 35.60width from.....51 - 75 mm ...$ 40.15width from.....76 - 100 mm ...$ 45.20width from...101 - 125 mm ...$ 49.75width from...126 - 150 mm ...$ 54.90

Bob Bullin
800-374-5009 ext:346
Call

2019 Zaffaroni MSR 160 P  Gang Saw
Call for Price

ZAFFARONI MSR 160 P BS/PD MULTI-BLADE PANEL SAW (W/TOP & BOTTOM ARBORS): -- SpecificationsZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004").The Saw is so precise it can also be used for V-Grooving.The Saw blades project through the table from above & below. A double-row of holddown wheels are mounted above the saw, with (28) adjustable rollers to prevent contact with the blade.The Top & Bottom shafts & wheels are connected by a quick flange system that can be removed/replaced without dismounting the bearing collars.Motorized adjustment of the depth of the saw blade projection by the touch-screen operating control(4) motorized & self-adjusting (according to material thickness) upper rubber coated rollers with grooves,(4) Idle lower polyethylene coated rollers & (1) Pair of ejector rollers at the output of the machine.Automatic locking and unlocking arbor shaft with HSK collector on the LH side controlled with electro-pneumatic device for the automatic cleaning of the coupling Safety device that features a presence and positioning sensor of the shaft; closed circuit air cooling device for the shaft bearingsSaw Blade work table with interchangeable MDF inserts.Technical Characteristics: -- Working Width is 1,600 mm (63"). -- Max. panel pass through is 1,780 mm (70"), min. length is (450 mm) 17.7". -- Motorized thickness adjustment from 0 - 70 mm (2.7"). -- Adjustable projection of the saw blades from the working from 0 - 62 mm (0" - 2.4") with circular saw blades or hogger trimmer up to 280 mm dia. (11"). -- Working table height is variable, from 970 - 1270 mm (38" - 50"). -- Material Feed Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power is 45 kW (60 HP) with toothed Belt Drive arbor. -- Saw Blade arbor 80 mm dia. x 1,310 mm (3-1/8" x 51-1/2"), with double-tangs and automatic anti-rotation locking clutch. -- Blade Arbor Speed of 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC Logic touch screen control with digtital communications through profibus cable.Spacer Sets: Machine requires Spacer Sets and Saw Blades (not included); pricing is available on request.Examples:width from......1 - 10 mm ...$ 25.45width from.....11 - 25 mm ...$ 30.15width from.....26 - 50 mm ...$ 35.60width from.....51 - 75 mm ...$ 40.15width from.....76 - 100 mm ...$ 45.20width from...101 - 125 mm ...$ 49.75width from...126 - 150 mm ...$ 54.90Example of productivity:Approx. 240 panels/hour running the machine at 49 FPM (15MPM) – considering to load 4 panels/minute) & a change-over time of approx. 10 minutes.

Bob Bullin
800-374-5009 ext:346
Call

2007 Zaffaroni MLS 130 P  Gang Saw
Call for Price

ZAFFARONI MLS 130 PD 2RR MULTI-BLADE PANEL SAW: Specifications -- Zaffaroni is the Top of the Line in Precision Multi Rip saws for Panels. Blade Depth is mechanically adjustable with a tolerance of =- 0.01 mm (0.0004"). The saw is so precise it can also be used for "V" grooving.The Saw blades project through the table from below. A double row of hold down wheels are mounted above the saw, with 24 adjustable rollers to prevent contact with the blade.Technical Characteristics: -- Working Width 1300 mm (51.125") -- Min. Panel Length 300 mm (11.875"). -- Motorized thickness adjustment from 0 - 60 mm (2.36"). -- Adjustable projection of the saw blades from the working from 42 - 62 mm (1- 5/8" - 2-7/16") with circular saw blades or hogger trimmer up to 280 mm diam. (11"). -- Working Table Height 1120 mm (44"). -- Variable Transport Speed from 3 - 45 MPM (9.8 - 147.6 FPM) via 1.5 kW (2 HP) geared motor & inverter. -- Main Motor Power 45 KW (60 HP) with Tooth Belt Drive. -- Saw Blade Spindle 80 mm x 1310 mm (3-1/8: x 51-1/2"), with double tangs and automatic anti-rotation locking clutch. -- Spindle Speed 4,000 RPM.Working Capacity: -- Panel overhang: 30 mm (1-1/8") -- Workpiece thickness: min. 12 mm (15/32") max. 60 mm (2-3/8") -- Edge thickness: Strips 0.4 mm to 20 mm (0.16" to 25/32") - coils 0.3 mm to 1.5 mm (0.12" to 1/16") -- Processing limits: Strips 900 mm² (1.39 sq. in) - coils 135 mm² (0.19 sq. in) -- Variable feed speed: 18 MPM to 24 MPM (59 FPM to 78 FPM) Note: Max. adjusting range is not necessarily the appropriate working speed. -- Projection of the saw-blades from the working table adjustable: from 42 to 62 mm (72 WITHOUT WORKING TABLE) with circular saw-blades or hog trimmer Ø 280 mm max. -- Max. milling depth: 22 mm with mills Ø 200 mm Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC logic control with digtital communications through bus cable.Options Include: -- (1) Infeed & (1) Out Feed Lauderdale-Hamilton, scissor lift tables; Capacity each 4000 lbs; Platform 48" x 96" (1,220 x 2,440 mm); Base 30" x 72" (762 x 1,829MM); Controls via foot pedal; Height Down/Up: 13" - 52" (330 - 3,744 mm);Automatic Down-Indexing Attachment for Out feed Lift; Power required per Unit 1HP / 1PH/ 110VAC; Dust manifold system for the Zaffaroni Rip Line Example of productivity: -- 400 panels each hour (1,220 x 2,000 mm at 15 MPM of advancement – considering to load 6 panels each minute)

Bob Bullin
800-374-5009 ext:346
Call

2011 Zeks 800 HSFA 400  Air Compressor
$5,750

ZEKS 800 HSFA 400 Refrigerated Air DryerSpecifications & features: approx. 400 SCFM at a max. of 300 PSI, 38° pressure dew point; uses "R-22" Refrigerant, exchanger, centrifugal condensate separator; powder-coated finish. -- Equipped with: "Z-TROL" Electronic digital controller with the following displays: Discharge pressure, refrigeration liquid temp., refrigeration suction temp., ambient temp., inlet compressed air temp., outlet compressed air pressure, differential air pressure, inlet compressed air pressure, and outlet compressed air temp. -- Complete with: 2" NPT Pipe connections, 1/4" electronic drain valve.

Jim Reedy
800-374-5009 ext:455
Call

Zeno Slow Speed  Hogs and Wood Grinders
Call for Price

Zeno 48" x 60" Slow Speed Grinder 55HP S/N 95A-4238

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved