• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
203 Results Found for Dust Collection System Viewing 1 - 20 of 203 results
RECENTLY ADDED
STANDARD LISTINGS
ACT 3-12 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 6,000 CFM. Specifications: -- Twin City Fan, 15 HP rated at 6,000 CFM @ 10" w.c. -- (12) Nano Elite, merv 15, cartridge filters with up to 3,046 sq. ft. of filter media that are 99.9% efficient. -- Dywer pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper @ ...$995. -- Fan outlet silencer @ ...$1,395. -- All in one - Starter / disconnect / timer board / pressure gauge $2,195Other models available, please check with the Product Manager5-year material and craftsmanship warranty on collector, vendor supplied components are warranted by component manufacturer
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
AER CONTROL SYSTEMS AT-12VCFD-12 Vertical Cartridge Dust Collector. -- General Info/Specs: Vertical Cartridge Filters (VCF): Vertically mounted cartridge design offers a unique baghouse in which the dust collected on the inside will fall much easier and do not land on the next lower cartridge (as is the case on horizontally mounted cartridges). Rectangular baghouse design with max. cap. of approx. 14,500 CFM at 2.2:1 Air-to-Cloth ratio, (24) filter cartridges, with 274 sq. ft. filter area per unit with a total of 6,576 sq. ft. cloth area. -- Filter Cleaning: Reverse Turbo Air pulse jet self-cleaning system controlled by automatic timer. Pulse air is stored in a manifold near top side of return air plenum. -- Comes with: Ground mounted PEERLESS A23 backward inclined Fan which develops 14,500 CFM at 10" SP belt driven by a 40 HP TEFC motor. DCS-10 PRATER 10" cast iron Rotary Air Lock Explosion vents. -- Includes: Motor starter, Steel support stand, some primary pipes (if you want it). Inlet plenum is below the cartridge filters and includes a baffle to drive the heavy dust down into the hopper. -- Actual model is AT-12VCFD-12
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AIR CURE 376RF12 Filter Unit.. 40,300 CFM @ 7:1 Air to cloth ratio, 11'-7.5" dia. round baghouse with (376) cloth filter bags of 12' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 5,760 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Rotating cleaning air manifold driven by 1 HP motor, (1) NEMA IV timer & solenoid/diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: Twin City 402BI Blower with 100 HP TEFC motor rated for 35,000 CFM; Explosion doors; walk-in access door on platform at top and safety ladder. 20" x 20" WP Rotary Feeder/RAL Electrical motor controls. -- Features: -- 10 gage shell all-welded construction Tangential scroll inlet, Inlet deflector baffle. Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- Depending on application unit air capacity can be increased to about 57,000 CFM, but to do so will need a slightly larger fan/motor.
Equipment Location:SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
AIREWORKS FX-15-4000X2 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use, rated at 4,000 CFM.Features: -- It features a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commerical dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 4,000 CFM / 8.38 IWG with 19.9:1 air to cloth ratio.Equipped with: -- (8) 12" x 8' High Efficiency filter bags up and (2) plastic collection bag down. The filter bags have 201 Sq. Ft. of cloth filter area and 19.9:1 air to cloth ratio with 22 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, non-sparking Heavy Duty machined & balanced impeller; 15" inlet dia. -- Manual motor starter for 230 V (100 amp breaker) or 460 V (30 amp breaker). MUST SPECIFY. Photo represents unit with Air-Lock and Hopper / Ask for pricing
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
AIREWORKS FX-15-4000X3 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commerical dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 4,000 CFM / 10.6 IWG with 17.7:1 air to cloth ratio. -- Equipped with: (12) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. The filter bags have 226 Sq. Ft. of cloth filter area and 17.7:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Complete with: Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, non-sparking Heavy Duty machined & balanced impeller; 15" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
(2) 44" Cyclones w/ Air Locks
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
AIREWORKS FX-15-5000X3 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commerical dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 5,000 CFM / 9.68 IWG with 18.9:1 air to cloth ratio. Equipped with: -- (12) 12" x 7' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 263.9 Sq. Ft. of cloth filter area and 18.9:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
AIRFLOW SYSTEMS DC-12 CARTRIDGE Dust Collector. Two Units are being sold together. -- Specifications: 8,000 CFM capacity approx. for both Filters Cartridge System complete with (12) cylindrical cartridges for each unit (approx. 133 sq. ft. cloth area per cartridge), for total approx. 3,192 sq.ft. of filter area for both unts; operating at 2.5:1 air-to-cloth ratio. -- Comes with: Automatic continuous Vibra-Pulse jet cleaning via compressed air, Sequencing Timer in an enclosure. Heavy Duty steel legs to position unit approximately 60"' above the ground, providing sufficient clearance for a Hopper Outlet for a sealed Drum . A separate Rotary Air Lock (RAL) can be added to each unit by elevating the legs if necessary. -- Equipped with: TWIN CITIES model 182 BCSW fan with 20 HP TEFC motor; fan rated for 7,000 CFM at 12" SP. -- Features: Proprietary auto-blocking system which protects the clean side of the air path from contaminants.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AIRFLOW SYSTEMS TC-4 Air CleanerThe Airflow Systems line of high-efficiency air cleaners remove annoying smoke, odors, dust, and dirt from offices, break rooms, cafeterias, and computer rooms. Class II Direct-Drive Blower: Higher static pressure, longer filter life and greater reliability; spark resistant; no belts or pulleys to replace.Specifications: -- 3 HP blower rated at 3,000 CFM -- Ambient Air inlet. -- (4) New AirMax Premium Media Cartridge Filters, flame retardant. -- Vibra-Pulse filter cleaning system. Cleans filters 75% more effectively than reverse pulse systems. -- (2) Hopper outlets w/ slide gate discharges.Single Phase motor add $550 to priceComplete with installation, operation and maintenance manual. Sold with (6) month mechanical warranty
Equipment Location:MIDWEST
Bernie Straple
800-374-5009 ext:339
APSCO 63-3 Modular Baghouse Dust Collector with Rotary Air Lock. -- Overall Specs: 10,000 CFM, with 990 sq. ft. of polyester felt 10 oz. of filter media, comprised of (54) filters at 10" dia. by 84" long. Design based on 10:1 Air-to-Cloth ratio. -- Main Blower/Motor: Side mounted APSCO "MH30", material handling fan with belt driven 40 HP TEFC motor. Main blower mounted in a positive pressure configuration. 22" Fan inlet dia. (Motor was replaced a couple of years ago). -- Construction: Consists of (3) modules each with (18) filter bags. System can be expanded with additional sections and blowers as the company grows. Specific machines can be run by dedicated blowers to save electrical cost, as the entire unit doesn't have to run. Complete with: -- Internal drag chain conveyor supplying a Rotary Air Lock with 5 HP TEFC gearbox/chain drive. System disconnect included. -- I-beam and angle iron support structure with support platform for main fan and catwalk. -- (3) Integral access doors/explosion doors. rectangular plenum to (18" dia.) return air into building.
Equipment Location:MTN/CENTRAL CDN
Tony Cornacchione
800-374-5009 ext:432
BELFAB JNBM-OP Modular Dust Collection SystemPatented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker.
Equipment Location:WESTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB JNBM-OP Dust CollectorPatented Modular Technology. -- Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker. -- Includes: Manual starter, factory installed with 5' cable for three phase.
Equipment Location:MTN/CENTRAL CDN
Bernie Straple
800-374-5009 ext:339
BELFAB JNBM-OP Dust CollectorPatented Modular Technology. -- Designed to collect dust particles ranging from coarse to fine. -- Compact, small footprint interior application design. -- 7.5 HP motor with 3,500 CFM. -- The filtration surface is composed of (1) 165 sq. ft. filtration module with (18) twill cloth filter tubes. -- Direct drive centrifugal fan assembly. -- Anti-spark cast aluminum impeller. -- Manual bag shaker. -- Includes: Manual starter, factory installed with 5' cable for three phase and roll-out hopper with 10" casters.
Equipment Location:NORTHWEST
Bernie Straple
800-374-5009 ext:339
BELFAB NBM-2-10 OP Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required. -- Designed for interior use. -- Rated @ 4,600 CFM with 8.5" static pressure W.G.; (2) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 330 sq. ft. total cloth area; Discharge to (2) plastic bags. -- Equipped with: 10HP - 1,800 RPM Hummer Blower drive centrifugal fan assembly, anti-spark cast impeller; 12" inlet dia. Wired Magnetic starter for 208/230/460/600 V. -- (2) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Additional options available.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB NBM-OP3 15 Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required; designed for interior use. -- Rated @ 5,000 CFM with 10" static pressure W.G.; with standard 15 HP blower at 3,600 RPM, 14" inlet, anti-spark steel impeller. -- (3) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 495 sq. ft. total cloth area. -- Includes: (10) dust collection plastic bags and (2) quick release clamps per filter module.Options: (300) Gal. waste storage cap. via (3) Heavy Duty plastic Tilt-Trucks w/rollers, each with air-tight quick coupling plate and view port, Hummer Blower available...ask for pricePrice includes pre-wired magnetic starter.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB DW2-7.5 Modular Dust Collector. Patented Modular Technology that easily upgrades as required when you need more capacity. -- Interior use design. -- Direct drive, 7.5 HP, 3,500 CFM, centrifugal fan assembly with Anti-spark cast aluminum impeller. -- (2) Heavy Duty plastic Tilt-Trucks w/rollers for fast disposal of wood waste & chips with (2) DW filter modules. -- Tilt-Truck that easily slides out for disposal manually or by Lift Truck. -- Air-tight quick coupling plate. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB DW3-10 Modular Dust Collector. Patented Modular Technology that is easily upgraded as required when you need more capacity. -- Interior use design. -- (3) Heavy Duty plastic Tilt-Trucks w/rollers for fast disposal of wood waste & chips with (3) DW filter modules. -- Tilt-Trucks easily slides out for disposal manually or by Lift Truck. -- Air-tight quick coupling plate. -- Direct drive 10 HP, 4,600 CFM rated centrifugal fan assembly with Anti-spark cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460 or 600 V. -- Additional options available...add other machine(s) later by adding modules and upgrading the Blower!
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP, 3,600 RPM, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460 V. -- Additional options available
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 20 HP, 3,600 RPM, 6,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags up and (5) plastic collection bags down, 175 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460 V. -- Additional options available.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339