Dry Kilns For Sale
Category
Dry Kilns
46 Results Found
$ 12,000
NYLE L500 DEHUMIDIFYING DRY KILN: -- Specifications:Complete packaged Dehumidification Drying System ready for installation into custom-built drying chamber. (3) 0.50 HP Air Movers, 24" dia. circulating fans.Designed to operate effectively at low humidity levels; can bring moisture content to as low as 6%. -- Operating Control: Patented "XDH" Control System is housed in a corrosion resistant, epoxy coated aluminum cabinet and operates over a wider range of temperatures with greater efficiency than any Dryer available. -- Complete with:5 HP Compressor, 1 HP internal blower and 8 kW electric auxiliary heat. Design temperature range of 70° - 160° F; removes 720 Lbs of water/(24) hours.The "L500" has a load capacity of 4,000 - 15,000 board feet. -- Options Include:Insulated Door and Door Frame as Pictured.NOTES: ● Two identical units are available. See Listing BD-010318 for the other. ● Previous owner said these are in good condition despite the year of manufacture. ● Photos pertaining to both units are shown here with the exception of the nameplate photo. ● These units were often supplied from the factory with (5) air handling fans rather than (3) as supplied here. ● No building provided. Chamber plans available. ● NYLE new model number for the L500 is HT 8 (HT stands for High Temperature).
Call for Price
NYLE L500 DEHUMIDIFYING DRY KILN: -- Specifications:Complete packaged Dehumidification Drying System ready for installation into custom-built drying chamber. (3) 0.50 HP Air Movers, 24" dia. circulating fans.Designed to operate effectively at low humidity levels; can bring moisture content to as low as 6%. -- Operating Control: Patented "XDH" Control System is housed in a corrosion resistant, epoxy coated aluminum cabinet and operates over a wider range of temperatures with greater efficiency than any Dryer available. -- Complete with:5 HP Compressor, 1 HP internal blower and 8 kW electric auxiliary heat. Design temperature range of 70° - 160° F; removes 720 Lbs of water/(24) hours.The "L500" has a load capacity of 4,000 - 15,000 board feet. -- Options Include:Insulated Door and Door Frame as Pictured.NOTES: ● Two identical units are available. See Listing BD-010317 for the other. ● Previous owner said these are in good condition despite the year of manufacture. ● Photos pertaining to both units are shown here with the exception of the nameplate photo. ● These units were often supplied from the factory with (5) air handling fans rather than (3) as supplied here. ● No building provided. Chamber plans available. ● NYLE new model number for the L500 is HT 8 (HT stands for High Temperature).
Call for Price
$ 10,000
2- Nyle Firewood Kiln kits with Natural Gas fired 1.2m BTU furnace each unit. Kits include all fans, heat sensors, controls, powered exhale fans and doors with tracks. No Building These units are in great condition. $10,000 each
Call for Price
2020 Pallet Inferno Heat Treating system Runs on Electrical "Like New" Has Read Outs HT Sanitizer Heat Treats & Sanitizes.
$ 50,000
High-frequency vacukiln, model is a dx8 will hold 20ft material new in 2014 was revamped in 2018 inside chamber was blasted and coated with special material from sherwinwilliams 3 Phase power Required
Call for Price
Call for Price
Call for Price
CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System
Call for Price
$ 5,000
Custom Built Portable Solar Kiln - Built in 2016 by the seller - Will hold lumber 10' 3" long - Can fit 1224 bf in chamber - Dimensions: 14' long, 8' wide, 11' height - Averages 800 - 1000 bf per run - Portable with ibolts for pulling - Includes enough wooden stickers to dry a full load - Kiln is currently in storage
Call for Price
Call for Price
Call for Price
6’ Dry Kiln Sticks, Multiple semi loads, Banded in orderly bundles and stored inside.