• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
28 Results Found for Straight Line Rip Viewing 1 - 20 of 28 results
RECENTLY ADDED
STANDARD LISTINGS
20hp motor.DIEHL SL52 Ripsaw see our entire inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL50 Straight Line Rip Saw; With 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor.Specifications: -- 16" Blade capacity. -- 2-1/2" Max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Table top size. -- 2 HP Feed drive, 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters.Saw is equipped with: -- Floating rip fence. -- Self-adjusting anti-kickback fingers. -- Lazer Light set-up.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL 52 Straight Line Rip Saw:Specifications: -- 15 HP - 3,600 RPM Direct Drive bottom mounted arbor motor. -- 2" Dia. arbor, 18" max. blade cap., blade included, 4-1/4" max. depth of cut, 10" min. part length.Dimensions: -- 25" Throat capacity (width of table to the right of blade), & 36" to the left, 82" L x 64" W table.Features: Variable feed speed from 55 - 190 FPM, 3 HP feed drive, split chain drive, automatic chain lubrication. -- Top pressure system with (8) full width rollers & (2) split rollers over blade.Complete with: Infeed fence, push button magnetic starter. -- Note: This machine was reconditioned by Diehl Machinery in 1999, Glue Line Quality.
Equipment Location:MID ATLANTIC
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL-52 Straight Line Rip Saw Left Hand; Specifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4"" max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting anti-kickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Note: Shipping Dimensions 7.5' L x 7' W x 5.5' H; weight: 5,000 Lbs.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL55 Straight Line Ripsaw;Specifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade capacity. -- 2-1/2" max. depth of cut with a 16" blade. -- 1-1/2” maximum depth of cut with a 14” diameter blade. -- Min. depth of cut is 1/8". -- 12" min. part length. -- 19" Width of table to the right of blade & 30" to the left. -- Table size 56" long x 45" wide. -- 2 HP Feed Motor, 2 speed 55 or 110 FPM. -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade.Equipped with & Features: -- Rip fence, push buttons and magnetic starters.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
Diehl SL50 In Line Rip Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
DIEHL SL 55 Straight Line Ripsaw;Specifications: -- 10HP - 3,450 RPM Direct drive arbor motor. -- 2" Dia. arbor, 18" blade cap., 4" max. depth of cut. -- 12" Min. part length. -- 21-1/2" Width of table to the right of blade & 30" to the left, 43" table length. -- 2 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; twin chain drive, automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- All cast iron machine.Complete with: Rip fence, new VFD for the 3 HP speed, New motor starter, push button controls. -- Oiling system works well, approx. 50% of chain left.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL Model 750 Straight Line Rip Saw;Specifications: -- 15 HP with Baldor Motor Brake - 3,600 Direct drive arbor motor. -- 2" Dia. arbor, 18" blade cap., 4" max. depth of cut. -- 12" Min. part length. -- 80" x 64" Table with 35" working height. -- 21-1/2" Width of table to the right of blade & 37" to the left.Feed Motor, Variable-rating ... -- 1 HP (581 RPM) @ 10.3 Amps -- 1.5 HP (880 RPM) @ 9.3 Amps -- 2 HP (1,170 RPM) @ 7.4 Amps -- 3 HP (1,750 RPM) @ 8.6 Amps. -- Feed Speeds: 4. --Automatic (pump) chain and race oiling system. -- Top pressure system with (4) segmented rollers & (2) split rollers over blade.Complete with: Rip fence, push buttons and magnetic starters. -- (1) 4" Dia. and (1) 5" dia. dust-outlet. -- Approx. overall dimensions: 80” x 64” x 60”; weight approx. 4,500 Lbs.
Equipment Location:MID ATLANTIC
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL50 Straight Line Rip Saw; -- With 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor.Specifications: -- 16" Blade capacity. -- 4-1/8" Max. depth of cut.รท 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Table top size. -- 2 HP Feed drive, 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters.Note: Label show 550 volts but actually wire on 480 volts
Equipment Location:NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL STRAIGHT LINE RIP
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
DIEHL STRAIGHT LINE RIP SAW MODEL SL30-19 --10 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 1.5 HP - 1,800 RPM feed drive, single fixed feed speed of 60 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Options: Diode laser & mounting bracket, please add ...$2,095.00; 15 HP motor, add ...$1,439.00; 20 HP motor, add ...$2,915.00
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
15 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 2 HP - 1,800 RPM feed drive, variable feed speed of 50 - 140 FPM. -- 30" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Options: Diode laser & mounting bracket, please add ...$2195.00, 20 HP motor, add ...$2,035.00 208, 240, or 480 Volt
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL 65-19 Straight Line Rip Saw: 20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; Features: -- 3 HP - 1,800 RPM Feed drive, variable feed speed of 70 - 200 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. Equipped with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure. -- Automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Option: Diode laser & mounting bracket, please add ...$ 1,745.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; 3 HP - 1,800 RPM feed drive, variable feed speed of 70 - 200 FPM. -- 24" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Option: Diode laser & mounting bracket, please add ...$ 1645.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
Heavy Duty, straight-line rip saw from the Leader of our industry. -- Glue line accurate to 5' (1.5M). -- DIEHL's proven chain / race, spindle / arbor and pressure roll system make up the foundation for this saw that produces the industries most accurate glue line cut, Gauranteed.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL-55 Straight Line Rip SawSpecifications --15 HP - 3,450 RPM Direct drive arbor motor, -- 2" dia. arbor, 16" blade capacity. --2-1/2" max. depth of cut with a 16" blade. --1-1/2” maximum depth of cut with a 14” diameter blade. Min. depth of cut is 1/8". 12" min. part length. --19" Width of table to the right of blade & 30" to the left. --Table size 56" long x 45" wide. --2 HP Feed Motor, 2 speed 55 or 110 FPM. --Twin chain drive. --Automatic dip lubrication. --Top pressure system with (6) full width rollers & (2) split rollers over blade.Equipped with & Features: Rip fence, push buttons and magnetic starters.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
DIEHL 750 Straight Line Rip Saw;15 HP - 3,450 Direct drive arbor motor,Specifications: -- 2" dia. arbor, 18" blade capacity. -- 4" Max. depth of cut, 12" min. part length -- 21-1/2" width of table to the right of blade & 37" to the left. --Twin chain drive, automatic dip lubrication. -- Top pressure system with (4) segmented rollers & (2) split rollers over blade. -- Complete with & Features -- Rip fence, --Set of anti-kickback fingers --Push buttons, main disconnect, and magnetic starters.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
DIEHL 750 Straight Line Rip Saw;15 HP - 3,450 RPM Direct Drive Arbor motorSpecifications: -- 2" dia. arbor, 18" blade capacity. -- 4" Max. depth of cut, 12" min. part length -- 21-1/2" width of table to the right of blade & 37" to the left. --Twin chain drive, automatic dip lubrication. -- Top pressure system with (4) segmented rollers & (2) split rollers over blade. -- 80" x 64" table w/35" working height --80” x 64” x 60” approx. overall dims.Complete with & Features -- Rip fence, --Adjustable rip-fence with left & right position lock-stops --Mattison-Kipp automatic chain and race oiling system --(1) 4" diam. and (1) 5" diam. dust-outlet --Push buttons, main disconnect, and magnetic starters
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
DIEHL SL-52 Straight Line Rip Saw Left Hand (rebuilt and suitable for a glue joint accuracy); 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor.Specifications -- 14" to 18" Blade diameter. -- 4-1/4"" max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed 65 to 190 FPM. -- 48" throat capacity (width of table to the right of blade --25" width of table right of saw --35" working height --36-5/16 width of table to left of saw --Table size 61" x 80" --91" x 81" x 61" approx. overall dimensionsEquipped with & Features -- Push but magnetic starter --Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting anti-kickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Note: weight: 5,000 Lbs
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348