• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
60 Results Found for Circular Sawmill Viewing 1 - 20 of 60 results
PREMIUM LISTINGS

Cardinal Circular Sawmill

Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
1. 36" Edmiston Sawmill 4 HB w/New Computer Setworks (T.I.C.) w/ Log Turner $20,000 570-204-8043
Equipment Location:Milton, PA
570-437-2090
Like new barely used Hurdle Sawmill - 60ft 3-Beam Trailer, 4 Headblock Challenger Carriage, 36" Opening, Offbearer Belt, Heavy Duty Chain Log Turner, Soundproof Cab with AC. This is a perfect sawmill for cutting long length lumber and timber. After we purchased it we never really put it into service. the original cost was over $200,000.00
Equipment Location:Nacogdoches, TX
512-914-4700
STANDARD LISTINGS
Cleereman 36" 3 Head Block Circle Saw mill, 15' Carriage, 50' of Track, Husk and Cab. Out and Ready to ship.
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman Model 40 3HB Carriage Track and Panagraph W/ Saw Cab and Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman Model 36 3HB Carriage Track Panagraph Cab and Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman 3 HB Mill Track Panagraph and Husk Frame
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman Model 48 3HB Carriage, Track and Panagraph
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman Model 40 Circle Saw Mill Serial # 40-518 95
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cleereman 42" 3HB Slant Carriage w/Cab & Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
36" Cleereman LH Carriage, Track, Cab, Controls & 100HP Jacobson Carriage Drive.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CM Sawmill Comes With Air operated 15ft carriage Selset set works Head works with 48 inch saw 100hp electric motor Hydraulic pack with all hoses FREE Delivery within 100km of Moncton,NB Trailer not included
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
CMC 3 Head Block Circle Mill cab and controls carriage and Track
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

CMC Circular Sawmill

Call for Price
Tyrone Berry feed system with cooler Split belt with kickersto a Lane horizontal edger 50HP electric Feed deck with stop and load and log turner Outfeed green chain and cant flipper Large booth Saw Paw Sharpener with (2) extra blades Rens Metal detector Sawdust collection system All electical wiring included and starters and extra parts 134M Moulder 4 x 12" included Air system for sawdust that also serves the 4 sided moulder This full automatic modular mill is run with a 100KW GMC diesel generator with 200 gallon tank to a 125HP electric motor to the headsaw. The 125HP motor is step started and once it is running there is plenty of power for all accessories. This generator runs about 5 gallons per hour so it is cheap to run. The owner of this is selling to develop the land as this was a side business. This is ready to load
Equipment Location:MA
Carolina Machinery Sales, Inc
704-288-1904
Corley 3 Head Block Carriage, 60' of Track, Pantagraph, Cab. Out and Ready to Ship.
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Dixon Portable Circle Saw with 52" Bottom Blade and 38" Top Blade with 4 Saw Vertical Edger, Runs off a Fuel Efficient 247 HP Duetz Motor. 2 Strand Infeed Deck
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Product No. 4403 2002 4 Head Block 100 HP Saw 50 HP Hyd. Pump 50' Plus Track 25' Capacity 15' 3 Strand Log Deck Stop And Load Off Bearing Belt Electric/Hydraulic Set Silvatech Included Not Installed Currently Under Power PRICE: $35000 Machine Type: Circular Sawmill Manufacturer: Edminston Model: 4 Head Block Year: Machine Location: South
Equipment Location:South
Keith Comeau
704-929-9122
Mill is complete Log capacity: 36" x 16' Computer setworks 55' Track Stop end load log deck Chain log turner 20' Outfeed rolls (2) 30" Top saws (3) 56" Bottom Saws 125 HP Main drive Vertical edger with (3) blades and 50 HP Motor Approximately: 1200 to 1500ft per hour Approximately: 130-160 tie logs in an 8hr shift Nice computer setworks Only 25% wear on tracks Spare blades will be included This mill has been removed from service in June 2014 and is ready to load. The seller has confirmed that this is in good working/running condition and is ready to load. Was working fine according to seller when removed from service.
Equipment Location:KS
Carolina Machinery Sales, Inc
704-288-1904
Heavy duty EDMISTON modular mill. very good condition. Complete log deck, log turner, 4 head block 42" carriage, drop belt, off bearing belt and husk. 50 HP hydraulic power unit.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Frick 1180C 4 Head Block Circle Saw Mill, rails, Husk, Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351