You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
455 Results Found for Biomass Viewing 1 - 20 of 455 results
RECENTLY ADDED
PREMIUM LISTINGS
3680 Bandit Chipper with Caterpillar 700HP Engine, Remote, Blower Attachment, 900 Hours, Recent Checked out all Filters/ Fluids Changed. NICE!!
Equipment Location:Elkins, WV
Reckart Equipment Co.
304-614-7939
Bandit Beast 3680 for Sale, Various Configurations, Priced to Sell, Valued to Make You Money, Financing and Long Term Leases Available
Equipment Location:Peru, IN
Recycling & Processing Equipment, Inc.
765-472-5500
2005 Morbark 30RXL, 8,300hrs, New long 3412E block installed by CAT w/ 1,200hrs, Joystick controls, autofeed, heat/AC, ,light package, onboard compressor, Proheat, All wear surfaces have been replaced, Large infeed yoke. $125,000 - Delivery and 100% Financing Available. (401)623-0347
Equipment Location:Coventry, RI
Premier Tree Service
401-623-0347
2016 MORBARK 223 STAND-ALONE FLAIL $260000 312-953-5535. EXTREMELY LOW HOURS!! PRICED TO SELL. Includes CAT Gold Extended Service Plan 5 yrs/5000 hrs. Recent OEM Inspection and upgraded to cold weather start. This unit is ready to work. Get a lightly used machine at a fraction of the new price (about $400K) and start producing high quality chips immediately.
Equipment Location:Holland, MI
Northern Biomass Fuels LLC
312-953-5535
LOW, LOW HOURS! This machine is 2 years old, priced to sell and ready to work. Previously used to supply flailed chips to wood pellet mill. New in July 2016. Includes CAT Gold Extended Service Coverage 5yrs/5000 hrs. This model has a dirt separator to further ensure high-quality chip production. Also offering the companion Morbark flail in a separate listing.
Equipment Location:Holland, MI
Northern Biomass Fuels LLC
312-953-5535
STANDARD LISTINGS
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumpercomplete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
12" CHIPPER KUBOTA DIESEL 54HP PINTLE HITCH
Equipment Location:Manton, MI
Lutke Equipment LLC
231-824-9505
75 HP Motor Swinging Hammers Infeed Hopper
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
1979 Asplundh JEY 12756 Chipper - Ford Engine - 300 Horsepower - Pintle Hitch - Average Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
(2) 20' Augers with Motor and Drive
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Babcock & Wilcox Wood Dust/Oil Fired Steam Boiler
Equipment Location:Franklin, VA
LPS Equipment & Acquisition Co.
731-986-4351
Equipment Location:Columbus, OH
Columbus Equipment Company
937-424-7678
2011 Earthsaver 16 X 6 Compost Turner - 400 horsepower Cummins engine - Excellent condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
BAKER-RULLMAN (or HEIL) 8-24 Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer;Complete with the following major components and features: -- BAKER-RULLMAN 8 Ft. x 24 Ft. 3-Pass Dryer Drum with new drum Seals. -- BAKER-RULLMAN Trunnion Bases and Drum Drive. -- Dryer Input Hopper Feeder with controlled speed Screw bottom and new $4,000 Gearbox. Material Input Auger. -- Dryer System Main Fan. -- 10 MM BTU capacity WEBB Biomass Burner with $8,000 of new refractory with professional installation. -- Fuel Bin with screw bottom. Screw speed is automatically controlled by Burner Controls. -- Cyclo ne Collector. -- Cyclone Discharge Screw Conveyor. -- Includes Electrical with $12,000 in new components. -- Burner Modulation Controls. -- NOTES: ● The trunnions are all in good condition with $4,000 of new bearings. ● This type of system is commonly capable of drying up 3 to 4 Tons per hour of sawdust or up to 60 - 65 yards per hour of molder shavings, depending upon input/output moisture content levels. ● A WEBB burner requires about 3/8" minus material and 20% or less moisture content. Often fuel is taken from the product output and there is a fan available on this system for that purpose.
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001

BAKER-RULLMAN Drum Dryer

Call for Price
Baker-Rullman 10.5 x 32 Triple Pass Dryer Webb 20-D Burner Controls for both systems Fisher-Klosterman Cyclones- System 125 HP Fan/Blower to the Cyclones Walking floor trailer, screen and hammermill are not included. This system is still in place and ready to be removed from teh current location.
Equipment Location:CO
Carolina Machinery Sales, Inc
704-288-1904
BALE-X Loose Material Bagging System includes:Standard 2-1/2 yard hopper, 10-gauge steel construction, (4 x 4) square steel tube frame, and cladded belt system to move the product to the bag filling spout. -- Includes: Plate in the front to support the bag during filling, height adjustable for 2, 3 & 4 cu/ft bags. -- 2,000 Lbs Empty machine weight, fork lift pockets for very easy movability through the yard. -- Capacity to fill 2, 3 & 4 cu/ft bags and 1-yard bulk bags.(2) Operators can bag (200) 3 cu/ft bags per hour; (2) operators can also bag (15) plus 1-yard bags/Hr.Options can be added such as; Hot Air Plastic Bag Sealer, Motorized Conveyor and Bag Flattener .
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Gasoline engine powered Bulk Bagger; system includes: Standard 2-1/2 yard hopper, 10-gauge steel construction, (4 x 4) square steel tube frame, and cladded belt system to move product to the bag filling spout. -- Includes: Front plate to support the bag during filling, height adjustable for 2, 3 & 4 cu/ft bags. -- 2,000 Lbs Empty machine weight, fork lift pockets for very easy movability through the yard. -- Capacity to fill 2, 3 & 4 cu/ft bags and 1 yard bulk bags; (2) operators can bag (200) 3-cu/ft bags per hour; (2) operators can bag (15) plus 1-yard bags per hour. -- Complete with: 11 HP HONDA gas engine drive. -- Options can be added such as Hot Air Plastic Bag Sealer, Motorized conveyor and Bag Flattener.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
2005 Bandit Beast 4680 Horizontal Grinder - PROJECT MACHINE - 0 hrs on rebuilt clutch - Engine has been in enclosed shop, not in grinder - Cummins recommends complete rebuild - CALL FOR FULL REPORT - No outfeed conveyor belt - Some various small parts missing
Equipment Location:KS
Apollo Equipment
800-982-2844