• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Lathes and Carvers Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous roughing & finishing, (1) dowel cutting turret knife. Approx (10) follower rings for travelling steady rest. -- Separate control console with: "TRIA 4000" PLC, 720 KB memory, and 3-1/2" floppy disk. Programs for each profile are stored on a disk so there is not need for a template/copy unit. Can control speeds, pauses, up to 10 passes for machining. -- Comes with a Labtop computer with WINDOWS '98 and uses "CT CAD" to generate programs for the profiles. -- Includes: Revolving steady rest, bushes, ball bearing centers; quantities & sizes to be provided. Knife sharpener and a selection of tooling. -- Equipped with: Pneumatic hopper feed and unloading device of finished pieces.
Equipment Location:Midwest
Tony Cornacchione
800-374-5009 ext:432
CENTAURO TC-1200 Copy Lathe;47-1/4" Max. between centers. -- 4-3/4" Height of centers over bed. -- Max. copy dia. 6" (4-1/8"). -- Max. dia. permitted by traveling steady 3-1/2" (2-1/2"). -- 4 HP main motor, 900 - 1,500 - 2,200 & 3,540 RPM spindle speeds. -- 1 HP hydraulic variable speed carriage with tool post and revolving steady rest. -- (2) Independent gouges working in conjunction with the traveling steady rest. -- Variable speed hydraulic saddle movement. Standard Equipment & Specs: -- Drive center with (2) interchangeable heads 1" and 1-3/4". -- Tailstock revolving center 1/2". -- Traveling steady rest max. 3-1/2" (square 2-1/2" x 2-1/2") with reduction bushing. -- (2) Vertical Tantung gouges, radius 1.2 mm and (1) precutting tool. -- Work-piece centering device. -- Tool support rest for hand turning. -- (2) Dust extraction ports 4" dia. -- Motor protection switch. -- Emergency push button. -- Front sliding safety guard. -- Standard: Service tool kit and Abrasive stone for cutting edge dressing.
Equipment Location:SOUTHEAST
Tony Cornacchione
800-374-5009 ext:432
CENTAURO T5E -1500 Semi-Automatic Hydraulic Copy lathe with (2) copiers. -- General data: 59" Max. between centers and 8-5/16" height of center over bed, 5.5 HP main motor with saddle advance using a lead screw with precision recirculating balls for max. accuracy. Automatic work cycle sequencing with electronic control capable up to (5) different programable cycles. -- Drives: Programmable saddle with variable feed speed; 900 - 1,500 - 1,800 - 2,250 - 3,000 & 4,500 RPM spindle speeds; 1.5 HP hydraulic variable speed carriage, 0 - 39-1/2 FPM, carriage return speed 39-1/2 FPM. --Equipped with: (2) Hydraulic tracing units and revolving steady rests; 3-1/2" max. square part size with revolving steady rest, 5" max. with copying unit, 5.8" stroke of copying unit. 19-5/8" max. length for manual turning. --Includes: Centauro knife grinder, drive center with interchangeable jaws, revolving tailstock center with 12 mm dia. tip, (2) dust extraction hoods and automatic double pass system for finishing center. -- Comes with: Centauro knife grinder, Phase converter for 220V single phase and Transformer for 600/440/220V 3 phase.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
CENTAURO "T5-1600" Hydraulic Copy Lathe; -- 63" (1,600 mm) Max. between centers, 4/5.5 HP main motor, two speed selector switch, 900 - 1,500 - 1,800 - 2,250 - 3,000 and 4,500 RPM spindle speeds. -- 1 HP Hydraulic power pack for variable speed carriage 0 - 19 FPM carriage; return speed 24 FPM, hydraulic tailstock. -- Equipped with: (2) Independent copying units, (1) for roughing and (1) for finish cutting. -- (2) Revolving steady rests, max. dia. 140/100 mm square ( 5.5"/3.9"), and for max. dia. 90/65 mm max. square billet size. -- 6.8" (175 mm) Max. square section without steady rest, 9.8" (250 mm) max. dia. for manual turning. -- Includes: (2) Back slides manually operated with knives for making dowel ends; 45/26 mm drive center for headstock and 12 mm center for tailstock, (2) V-type gouges with 0.6 & 3.5 mm cut radii. -- Features: CENTAURO 'AG-125' Sharpener, with (2) diamond wheels, 1 HP, 600V. -- Complete with: Dust extraction hood, 3.9" (100 mm) dia.; sliding guard for operator protection. -- NOTE: Ex-Factory handles import/export to just about any country in the world.
Equipment Location:MTN/CENTRAL CDN
Tony Cornacchione
800-374-5009 ext:432