• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
7 Results Found for Straight Line Rip Viewing 1 - 7 of 7 results
STANDARD LISTINGS
CANTEK - C-12RS Straight Line Rip Saw --Ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (6) guide rollers, and solid welded steel base chassis. --Specifications: -- Saw blade dia. 8" - 12", saw arbor dia. 1", saw arbor speed 4,400 RPM. -- 15 HP Saw arbor motor, 2 HP feed motor, 45 - 120 FPM variable speed range. -- Min. workpiece length 8", max. cutting thickness 3-3/8", distance from column to center of chain 18". -- Table size is 39" x 57", table height 31-1/2". -- The cast iron upper pressure housing provides a stable mounting for the precision ground & nickle chrome steel saw arbor and can be easily adjusted by hand wheel for thickness changes. -- Features: 1-Piece cast iron chain with a diamond cut surface for positive material feeding. --Total amperage is 21.5 and the gross weight approx. 2,530 Lbs
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
CANTEK C10RS Straight Line Rip Saw12" Over cutting Rip Saw ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (6) guide rollers and solid welded steel base chassis.Specifications: -- Saw blade dia. 8" - 10", -- Saw arbor dia. 1", -- Feed speeds of 50, 65 and 85 FPM - 4,500 RPM, -- 10 HP saw arbor motor; 1 HP feed motor, -- Min. workpiece length 8", max. cutting thickness 3-3/8", -- 13 3/4" distance between saw and column, -- 30" X 50" table size, 31-1/2" table height.Features: -- The cast iron upper pressure housing provides a stable mounting for the precision ground & nickle chrome steel saw arbor and can be easily adjusted by hand wheel for thickness changes. -- Features a 1-piece cast iron chain with a diamond cut surface for positive material feeding.
Equipment Location:MTN/CENTRAL CDN
Joe Retzlaff
800-374-5009 ext:348
CANTEK C-12RSH Overcutting Straight Line Rip Saw;Ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (8) holddown rollers and solid welded steel base chassis.Specifications: -- 3.35" Max. thickness cap; 8" min. length; variable feed speeds from 50 to 120 FPM and powered by a 1 HP feed motor. -- 1" Dia. saw arbor powered by 15 HP arbor motor; swings 8" thru 12" dia. blade at 4,500 RPM; with 18" distance from blade to saw column. -- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) - V Belt driven from below. -- 31-7/8" From floor to top of table; table is 39" wide x 57" long. -- Rigid machine body consists of a thick welded steel frame with an integral table which is fitted with a sturdy cast column. Feed & Chain: -- 1-Piece cast iron chain with a diamond cut surface for positive material feeding and absolute straight line feeding. -- Precision caterpillar chain and double "VEE" guide rails are made of special cast iron. -- Equipped with high-frequency hardened chain Guide Rails. -- The chain connecting pins are made of high grade steel - heat treated & ground for high durability and low wear. -- (8) Hold-down rolls for increased control and precise straight line cutting (6 rows).Features: -- Easy to access adjustments and controls. -- Mechanical operation Chain Oiler (Best) provides consistent lubrication to the chain track and automatically adjusts to your feed speed. -- Equipped with: (3) Sets of anti-kickback fingers; (2) top and (1) set in the table. -- (1) 5" dia. dust outlet. -- Soft start, Star Delta starter - Telemechanique-Square D, Magnetic Wye/Delta Starters - Low Amperage Soft-Starter on the arbor motor - Electrics to UL/CSA Standards.Available Options when order with machine: --20mW Laser (FPIMLC1320W) & Laser Holder (FPICAN03) – made in N.A.... $ 495.00 -- KANEFUSA 12" Glue Joint Carbide Rip Saw Blade...$ 165.00
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
CANTEK SRS-330 Straight Line Rip saw --Very Rigid machine body with a welded steel frame with an integral cast & machine table, which is fitted with a sturdy cast column & saw unit. Excellent precision work accuracy and durability. Absolute straight line feeding to 13 ft. --Specifications --Max. workpiece thickness 4.33" Min. workpiece length 8" √∑Distance between saw and column 18.1" -- Saw arbor diameter 1". Saw blade diameter 10-14". Saw arbor speed 4300 RPM -- Useable chain length 47". Glue line guarantee 13' (+/-0.0098" or 0.25mm) -- Feed speeds variable 30 to 130 FPM. Arbor motor 20 HP, Feed motor 2 HP -- Dust collection outlet 4" --Table size 36.6" x 64.6". Table height 31-7/8"
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
CANTEK C-14RS Straight Line Rip Saw; Absolute straight line feeding Rip Saw. Rigid machine body consists of a thick welded steel frame with an integral table which is fitted with a sturdy cast column. Excellent precision work accuracy and durability.Specifications: -- 4.92" Max. thickness cap; 8" min. length; variable feed speeds from 50 to 120 FPM and powered by a 1 HP feed motor. -- 1" Dia. saw arbor powered by 20 HP arbor motor; swings 12" thru 16" dia. blade at 4,500 RPM; with 24" distance from blade to saw column. -- 31-7/8" From floor to top of table; table is 50" wide x 75" long.Feed System & Chain: -- Precision caterpillar chain and double "VEE" guide rails are made of special cast iron. The chain connecting pins are made of high grade steel - heat treated & ground for high durability and low wear. -- (8) Hold-down rolls for increased control and precise straight line cutting (6 rows). -- Mechanical operation Chain Oiler (Best) provides consistent lubrication to the chain track and automatically adjusts to your feed speed. When oil runs out the machine track stops running to avoid damage to track. Features: -- Precision Built Saw Arbor constructed of nickel chrome steel, large diameter, accurately ground and dynamically balanced. The arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) - V Belt driven from below, with easy to access adjustments and controls. -- (3) Sets of anti-kickback fingers; (2) top and (1) set in the table. -- Soft start - Star Delta starter. Telemecanique U/L magnetic starters.
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
CANTEK SRS330 Straight Line Rip Saw;FEATURES: Very Rigid machine body with a welded steel frame with an integral cast & machined table, which is fitted with a sturdy cast column & saw unit. -- Excellent precision work accuracy and durability. -- Absolute straight line feeding up to 13 ft. of ripping. -- Precision caterpillar chain and double "VEE" extra long (47.2”) guide rails are made of special cast iron the chain connecting pins are made of high grade steel - heat treated & ground for high durability and low wear. -- 8 hold-down rolls (6 rows).Specifications: -- Maximum work piece thickness 4.33". -- Minimum work piece length 8". -- Distance between saw and column 18.1". -- Saw arbor diameter 1". -- Saw blade diameter 10” - 14". -- Saw arbor speed 4,300 RPM. -- Useable Chain Length 47”. -- Glue line guarantee 13’ (+/- 0.0098” or 0.25 mm). -- Feed speeds variable 30 to 130 FPM. -- Arbor motor 20 HP -- Feed motor 2 HP -- 230 V = 60.8 Full Load Amps. -- Electrics 460/3/60 = 30.4 Full Load Amps. -- Dust Collection Outlet 4” -- Table size 36.6" x 64.6, Table height 31-7/8" -- Net weight 3,190 Lbs.Available Options: -- 10mW Non Gausian Laser (FPIMLM1410W) & Laser Holder (FPICAN03) Projects up to 16’ ..$ 695.00. -- Spare Saw Blade: 355mm (14”) x 4mm (0.157”) kerf x 1” bore x 50 teeth (CANSRS330-BLADE) ...$ 159.00
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
CANTEK C14 RS Straight Line Rip SawOvercutting Rip Saw ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (6) guide rollers and solid welded steel base chassis. Specifications: -- 4" Max. thickness cap and 8" min. length; variable feed speeds from 53 to 150 FPM and powered by a 1 HP feed motor; 1" dia. saw arbor powered by 20 HP arbor motor. -- Swings 8" thru 14" dia. blade at 4,500 RPM; 24" distance from blade to saw column. -- (1) 6" Dia. dust outlet; 32-1/2" from floor to top of table; table is 36-1/2" wide x 63" long; overall dimensions are 38" wide x 74.8" long x 57" high x 2,450 net Lbs. -- The cast iron upper pressure housing with the nickle chrome saw arbor can easily be adjusted by hand wheel for thickness changes. - Features a 1-piece cast iron chain with a diamond cut surface for positive material feeding. -- Rack & pinion fence adjustment for added precision and ease of use. -- Three rows of anti-kickback fingers (2) top & (1) bottom for safe operation; (8) hold-down rolls for increased control and precise straight line cutting (6 rows). -- 6" (150 mm) Wide chain track runs on double "VEE" guide rails which are made of special cast iron for added wear life and increased precision. √∑. -- Saw Arbor is precision machined, heat treated and precision ground to provide the tightest tolerances. -- Centralized control panel provides easy access to controls. -- Automatic lubrication system delivers consistent lubrication to the chain & track to protect against wear
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348