• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Jointer and Finger Jointer Viewing 1 - 4 of 4 results
STANDARD LISTINGS
CANTEK FL-08 Automatic Vertical Finger Joint Line - with the Following: -- MODEL "F-I29-T2" Automatic Infeed Table -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors. "F-C07" Auto Finger Joint Shaper, Left and Right Sides:Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”. -- Block Width with Horizontal Joint up to 6” (wider possible – optional). -- Thickness, Vertical Jointing from 0.78” to 6.3”. -- Thickness Horizontal Jointing from 0.78” to 2.36”.Specifications: -- 20 HP Motor for Shaper Spindle. -- 5 HP Motor for Trim Saw. -- 2 HP Motor for Bottom Scoring Saw. -- 1/2 HP for Feed Conveyor with Variable Speed Frequency Drive. -- Cycle Speed of max. 3~4 Cycles/Min. -- Note: Right side Shaper equipped with roller type glue applicator. "F-D16" Transfer Roller (From RH Shaper to Assembly Machine) -- Table Size: 23.6" wide x 35.4” long."F-A05-6" Two-Staqe Auto Finger Assembler -- Output Length: Up To 236” - 19.68’. -- Width from 0.78” to 6.3”. -- Thickness from 0.78” to 2.36”. -- 2 HP Drive for Feed Table. -- 5 HP Motor for Cut Off Saw. -- 5 HP Motor Hydraulic Pump. -- Speed of approx. (4) to (5) Finished boards/Min. All Electrics are to UL/CSA Standards with Wye Delta – Includes Soft Starter.Includes: Extra belts, blocks, cutter heads and some knives. Note: This system performs best when incoming blocks are run thru a 4-Sided Planer or Moulder.Production Example running 2" x 6" Blocks: -- 1-1/2" x 5-1/2" Blocks, 23.6" table = (15) blocks per cycle. -- (3) Table cycles per minute x 15 Blocks = (45) blocks per minute. -- (4) Table cycles per minute x 15 Blocks = (60) blocks per minute. Average Block Length of 24" = 90 to 120 LINEAL FPM
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CANTEK FL-09 Auto Finger Joint Line includes the following: -- Model F-I23-L2 AUTO INFEED TABLE. Table Size: 2000mm (78.7”) long x 650mm (25.6”) wide; 1 HP Infeed Table -- Model F-C05 L1.5 AUTO FINGER SHAPER – LEFT HAND: Table Size: 650mm (25.6”) accepts 150~1500mm (5.9” ~ 59.05”) board length; 20~60mm (0.78” ~ 2.36”) Vertical finger joint width; 20-200mm Thickness for Vertical Joint (allows up to200mm height of material on Shaper Table -- Shaper Specifications: 20HP for Main Cutterhead Spindle; 10HP for Trimming Saw; 2HP for Bottom Scoring Saw; 1/2HP for Feeding Conveyor; with Saw Blade, without Shaper Cutter; Shaping Speed – Max. 3~4 Cycle/Min. -- Model F-C06 RP-L1 AUTO FINGER SHAPER WITH GLUE APPLICATOR – RIGHT HAND: Table Size: 650mm (25.6”) accepts 150~1500mm (5.9” ~ 59.05”) board length; 20~60mm (0.78” ~ 2.36”) Vertical finger joint width; 20-200mm Thickness for Vertical Joint (allows up to200mm height of material on Shaper Table -- Shaper Specifications: 20HP (3Ph) for Main Spindle; 5HP (3Ph) for Trimming Saw; Top and Bottom Scoring Saw, 2HP (3Ph) x 2; 1/2HP (3Ph) for Feeding Conveyor; Gluing System – Roller Type System; with Saw Blade, Without Cutter; Includes Glue Applicator; Shaping Speed – Max. 3~4 Cycle/Min. -- Model F-D08-L2.0 Transfer Roller System; Table Size: 2000mm (78.7”) long x 650mm (25.6”) wide -- Model F-A05-4.5 TWO-STAGE AUTO FINGER ASSEMBLER WITH AUTOMATIC CUTOFF SAW: Table Size: 7200mm (284”-23.6.ft.) long x 20~200mm (0.78” ~ 7.88”) width x 20~60mm (0.78” ~ 2.36”) thick. -- Specifications: 2HP (3Ph) for Feeding Table; 5HP (3Ph) for Sizing Saw; 5HP (3Ph) for Oil Pump. Includes Saw Blade; Speed – Max. 4~5 Piece/Min. -- NOTE: For best performance, incoming bocks should run through a 4-side Moulder before using this finger jointing line.
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
CANTEK MODEL FJ-17 SEMI-AUTO FINGER JOINT SYSTEM INCLUDING THE FOLLOWING: -- Semi-Automatic Finger Joint Shapers; Right Side with Glue Applicator -- Incoming block capacities: -- 4.9” to 39.3” long -- 17.7” max. width -- 0.47” to 6.3” thick -- Powered by: -- 15 HP Shaper Spindles -- 5 HP Trim Saws -- Roller type glue applicator included on Right Side Shaper -- NOTE: Includes sawblades but without finger joint heads. Many head / knife configurations available on request -- Model F-D05 Transfer Roller Table Set (includes three units) Tables are 39.4” long x 17.7” wide -- Model F-A07-3 Assembly Press with Single Stage Automatic Infeed -- SPECIFICATIONS: -- Press capacities are: -- 10’ max. length capacity -- 0.78 to 6.6” wide -- 0.78” to 2.36 thick -- 2 HP Feed Motor -- 5 HP Cutoff Saw -- 3 HP Hydraulic Pump Motor -- Call Jeff Terrill for tooling options and delivery possibilities
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
CANTEK FJ-15B Manual Finger Joint System consisting of the following: -- ITEM 1: CANTEK F-C51 Finger Shaper (Left) Specs:Length: 115 - 1,000 mm (4.5” - 39”)Width: 20 - 450 mm (0.78” - 17.7”)Thickness: 20 - 160 mm (0.78” - 6.3”)With 7-1/2 HP motor for Cutting (Rotation 5,000 RPM)With 5 HP motor for Trimming Saw (Rotation 2,800 RPM)With Saw Blade, Without FJ Cutter (request sizes as desired)Dust Port Diameter: 1 x 150 mm (5.9”), 1 x 100 mm (3.9”)Machine weight: 1,452 Lbs (660 kG)Shipping weight: 1,584 Lbs (720 kG)Packing dimensions (LxWxH): 176 x 115 x 145 cm (7' x 4.5' x 5.7') -- ITEM 2: CANTEK F-C52 Finger Shaper (Right)Length: 115 - 1,000mm (4.5” - 39”)Width: 20 - 450mm (0.78” - 17.7”)Thickness: 20 - 160mm (0.78” - 6.3”)With 5Hp (3Ph) for Trimming SawWith 10Hp (3Ph) for Cutting Finger JointWith Saw Blade, Without FJ Cutter (request sizes as desired)Aspiration Bores Diameter - 1 x 150mm (5.9”), 1x100mm (3.9”)Easy Efficient hand Table FeedMachine weight: 1,452 lbs (660 kgs)Shipping weight: 1,584 lbs (720 kgs)Packing dimensions (LxWxH): 176 x 115 x 145 cm (7' x 4.5” x 5.7”) -- ITEM 3: CANTEK F-D05P1 Roll Conveyor TableLength: 1,000 mm (39.3”)Width: 450 mm (17.7”)Machine weight: 396 Lbs (180 kgs)Shipping weight: 506 Lbs (230 kgs)Packing dimensions (LxW): 203 x 97 cm (80" x 38") -- ITEM 4: CANTEK F-G01 Manual Gluing UnitWith 1/8 HP (3 Ph) Mag. StandardPacking with F-C51 -- ITEM 5: CANTEK F-A07-3M Single Step Auto Finger Joint Assembly PressLength (Max): 3,000 mm (118”) (other lengths available upon request)Width: 12 - 160 mm (0.47” - 6.3”)Thickness: 12 - 60 mm (0.47” - 2.3”)With 2 HP (3 Ph) for Feed MotorWith 5 HP (3 Ph) for Sizing SawWith 3 HP (3 Ph) for Oil PumpWith Saw BladeMachine weight: 3,300 Lbs (1,500 kgs)Shipping weight: 4,400 Lbs (2,000 kgs)Packing dimensions (LxWxH): 550 x 100 x 145 cm
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349