• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for Router Viewing 1 - 14 of 14 results
RECENTLY ADDED
STANDARD LISTINGS
Material processing dimensions of 62" x 122" x 8". -- Fixed 3-zone vacuum table, with vacuum pressure gauge. The factory installed vacuum table is designed for nested base panel processing. -- Moving gantry bridge rides on high precision HIWIN linear rails for consistent movement and accurate cutting. -- Welded structural steel machine base provides a solid foundation for superior cut quality. -- The tool gantry &and bridge travel by rack & pinion and the vertical axis travels on ball screws for smooth consistent movement. -- Industrial grade direct drive 3 HP router spindle is liquid cooled for cool & quiet running and extended life. -- Variable tool speed up to 24,000 RPM allows for the right cutting speed in any application. -- X- & Y-Axis 1,500 IPM Traverse speed for quick movement between cutting cycles to reduce total CNC machining time. -- Windows based CNC control comes pre-loaded on a DELL PC with a 19" monitor (included); very intuitive interface, quick to learn and easy to use. -- Compatible with virtually all CAD/CAM programming software on the market, which means you can choose the software that suits your business best. -- Unit ships unassembled and pre-wired to run on a standard 60 Cycle, 208/220/240 Volt "Single-Phase" outlet; easy setup, can be done by customer (user) himself! -- Includes a dust hood with 4" dia. inlet. -- Optionally add a "quick change" spindle.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD WR 408 ATC, ...CNC Router with Automatic Tool Changer:101" x 51" Moving gantry CNC, front-to-back configuration that is ideal for full sheet production material processing. -- Phenolic Matrix 6-zone vacuum table, moving gantry bridge rides on high precision HIWIN linear rails for consistent movement and accurate cutting. -- Welded structural steel machine base provides a solid foundation for superior cut quality. -- The bridge travels by rack & pinion; Z-axis travels on ball screws for smooth consistent movement. -- Industrial grade "HSD ES 330" 6 HP spindle with ATC System using ISO 30 tool holders; the 6-station tool rack is mounted at the back of the vacuum table. -- Variable tool speed up to 24,000 RPM allows for the right cutting speed in any application. -- X- & Y-Axis 1,500 IPM Traverse speed for quick movement between cutting cycles to reduce total CNC machining time. -- Windows based MACH III CNC control with: Ethernet Smooth Stepper motion, control board comes preloaded on a DELL PC, 20" monitor (included); very intuitive interface, quick to learn & easy to use. -- Compatible with virtually all CAD/CAM programming software on the market, which means you can choose the software that suits your business best. -- Machine ships fully assembled & prewired to run on a standard 60-Cycle, 220 Volt "3-Phase" power. -- Includes a dust hood with 4" diameter inlet. -- 10 HP ELMO Vacuum Pump with filter & relief valve. -- Router comes with (3) ISO-30 tool holders and (6) collets.Machine dimensions are 124" x 73" x 73" high to the top of the cat track.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD - RAPID-408LN, ...4' x 8' CNC Router with Linear Tool Changer & Optional Boring Head4' x 8' Flat Table CNC Router, great for "Nested Base Manufacturing" or just about any type of 3-Axis work.Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined toothed rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways providing extra smooth movement, high speed traverse and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "SYNTEC" CNC controller with 8" color LED monitor; includes integrating ARM11 processor, RAM 128M, CPU Clock, Speed 600M, Flash 256M, WINCE operating system. -- Up to (3) simultaneously controlled axes with, helical interpolation, tool offset, length compensation & backlash compensation, AQE compensation, LAN communication, 2-way transmission between the system and PC, Front USB interface. -- Compatible with virtually all CAD/CAM programming software on the market. - You choose the software that best suits your needs.Working Table/Envelope: -- 51" (1,295 mm), 98" (2,489 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- Max Traverse Speeds: 2,350 IPM -- Max Working Speed: 1,100 IPM. -- "Leadshine" AC 850w Servo drives & motors power all axes movements.Routing & Machining: -- (1) 12 HP (9 kW) Air cooled Router Spindle with: ISO 30 Adaptor, variable programming speeds from 6,000 to 24,000 RPM, -- (1) 12-Position ATC (automatic tool changer)Complete With: -- 10 HP (7.5 kW) Vacuum Pump. -- (4) ISO 30 tool holders -- (4) Pop-up pins to aid in panel positioning -- Automatic tool offset device. -- 11 kW Inverter. -- Automatic lubrication device with filter. -- Standard MPG hand wheelUtilities and Dims: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 52 Amps. -- Machine weighs approx. 3,960 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM;Available Option: -- (1) "HSD" Boring Head with (9) Spindles (5 +5) in "L"- Shaped configuration.The Rapid-408LN is one of the most versatile CNC Routers in its class and at the best price you can find!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD RAPID-510LN CNC Router with Linear Tool Changer & Optional Boring Head5' x 10' Flat Table CNC Router, great for "Nested Base Manufacturing" or just about any type of 3-Axis work.Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined toothed rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, providing extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "SYNTEC" CNC controller with 8" color LED monitor; includes integrating ARM11 processor, RAM 128M, CPU Clock, Speed 600M, Flash 256M, WINCE operating system. -- Up to (3) simultaneously controlled axes with, helical interpolation, tool offset, length compensation & backlash compensation, AQE compensation, LAN communication, 2-way transmission between the system and PC, Front USB interface. -- Compatible with virtually all CAD/CAM programming software on the market. - You choose the software that best suits your needs.Working Table: -- 63" (1,600 mm), 126" (3,200 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- Max Traverse Speeds: 2,350 IPM -- Max Working Speed: 1,100 IPM. -- "Leadshine" AC 850w Servo drives & motors power all axes movements.Routing & Machining: -- (1) 12 HP (9 kW) Air cooled Router Spindle with ISO 30 Adaptor, variable programming speeds from 6,000 to 24,000 RPM, -- (1) 12-Position ATC (automatic tool changer)Complete With: -- 10 HP (7.5 kW) Vacuum Pump. -- (4) ISO 30 tool holders -- (4) Pop-up pins to aid in panel positioning. -- Automatic tool offset device. -- 11 kW Inverter. -- Automatic lubrication device with filter. -- Standard MPG hand wheel.Utilities & Dims: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase. -- Machine weighs approx. 4,500 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.Available Option: -- (1) "HSD" Boring Head with (9) Spindles (5 +5) in "L"- Shaped configuration.The RAPID-510LN is one of the most versatile 5' x 10' CNC Routers in its class - an incredible value!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD WR 408 VAC CNC Router; Material processing dimensions of 51" x 98" x 8". -- Fixed 6-zone vacuum table:With vacuum pressure gauge. The factory installed vacuum table is designed for nested based panel processing. -- Moving gantry bridgeRides on high precision HIWIN linear rails for consistent movement and accurate cutting. -- Welded structuralSteel machine base provides a solid foundation for superior cut quality. -- The tool gantry and bridgeTravel by rack-and-pinion and the vertical axis travels on ball screws for smooth consistent movement. -- Industrial gradeDirect drive 3 HP liquid cooled wrench type router spindle. -- Variable tool speed up to 24,000 RPM allows for the right cutting speed in any application. -- X- and Y-axis 600 IPM Traverse speed for quick movement between cutting cycles to reduce total CNC machining time. -- Windows based CNC controlComes pre-loaded on a DELL PC with a 19" monitor (included); very intuitive interface, quick to learn and easy to use. -- MACH 3 PRO Is a full featured machine operating system with on-screen tool path graphics. -- CompatibleWith virtually all CAD/CAM programming software on the market, which means you can choose the software that suits your business best. -- Complete with: (1) 220 Volt, 3-Phase 10 HP "ELMO" vacuum pump, and (1) year manufacture parts and phone support warranty.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD WR 510 CNC Router;121" x 62" Moving gantry CNC, front to back configuration that is ideal for full sheet production material processing. -- Phenolic matrix 6-zone vacuum table; moving gantry bridge rides on high precision HIWIN linear rails for consistent movement and accurate cutting. -- Welded structural steel machine base provides a solid foundation for superior cut quality. -- The bridge travels by rack & pinion; Z-axis travels on ball screws for smooth consistent movement. -- HSD ES330 6 HP ATC BT30 direct drive router spindle, liquid cooled for cool & quiet running and extended life; 6-station tool rack is mounted at the back of the vacuum table. -- Variable tool speed up to 24,000 RPM allows for the right cutting speed in any application. -- X- & Y-Axis 1,500 IPM Traverse speed for quick movement between cutting cycles to reduce total CNC machining time. -- Windows based CNC control comes pre-loaded on a DELL PC with a 20" monitor (included); very intuitive interface, quick to learn and easy to use. -- Compatible with virtually all CAD/CAM programming software on the market, which means you can choose the software that suits your business best. -- Unit ships unassembled & pre-wired to run on a standard 60-Cycle, 208/220/240 Volt "Three-Phase" outlet; easy setup, can be done by customer (user) himself! -- Includes a dust hood with 4" diameter inlet; 7.5 HP high depression vane type Vacuum Pump. Additional 7.5 HP Pump can easily be added at a cost of ...$ 4,485.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD BASIC-510 CNC Router5' x 10' Flat Table CNC Router, great for entry level "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 63" (1,600 mm), 126" (3,200 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) Air cooled Router Collet Spindle with ER-32 collet Adapter, variable programming speeds from 6,000 to 18,000 RPM, Requires ER-32 ColletsComplete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 -10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 3,500 lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-510 is a perfect medium sized entry level CNC machining center that doesn't steal away your profits!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD BASIC-404 CNC Router4' x 4' Flat Table CNC Router, perfect for machining all your small parts.Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 51" (1,295 mm) x 51" (1295 mm) x 7.75" (197 mm). -- (4) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 HP (11 kW) Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 1,980lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-404 is a small machine with big boy capabilities!! Also available in T-Slot Version!!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD BASIC-408 CNC Router4' x 8' Flat Table CNC Router, great for entry level "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 51" (1,295 mm) x 98" (2,489 mm) x 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) "HSD" Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 -10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 3,000 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-408 is a perfect entry level CNC machining center that doesn't chip away at your bottom line!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD STANDARD-408 CNC Router4' x 8' Flat Table CNC Router, perfect for all your "Standard & Nested Base Machining" Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 51" (1,295 mm), 98" (2,489 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,400 IPM Max. traverse speeds. -- 1,000 IPM Max. working speed: 1,000 IPM. -- "Yaskawa" 850w AC servo drives & "SHIMPO" gear boxes power all axes movements.Routing & Machining: -- (1) 8.6 HP (6 kW) "HSD" Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 7.5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 40 Amps. -- Machine weighs approx. 3,510 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM;The Standard-408 is an above entry level machine that is fully capable of handling your diverse parts!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD STANDARD-510 CNC Router5' x 10' Flat Table CNC Router, perfect for all your "Standard & Nested Base Machining" Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 63" (1,600 mm), 126" (3,200 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,400 IPM Max. traverse speeds. -- 1,000 IPM Max. working speed. -- "Yaskawa" 850w AC servo drives & "SHIMPO" gear boxes power all axes movements.Routing & Machining: -- (1) 8.6 HP (6 kW) "HSD" Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 7.5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components. (not included): -- 10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 40 Amps. -- Machine weighs approx. 3,960 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The STANDARD-510 is an above entry level machine that is fully capable of handling your diverse parts!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD - SUPREME-408RT, ...4' x 8' CNC Router with Automatic Rotary Tool Changer & Boring HeadSupreme 4' x 8' Flat Table CNC Router, Perfect for your 3-axis routing applications including "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined toothed rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways providing extra smooth movement, high speed traverse and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "SYNTEC" CNC controller with 8" color LED monitor; includes integrating ARM11 processor, RAM 128M, CPU Clock, Speed 600M, Flash 256M, WINCE operating system. -- Up to (3) simultaneously controlled axes with, helical interpolation, tool offset, length compensation & backlash compensation, AQE compensation, LAN communication, 2-way transmission between the system and PC, Front USB interface. -- Compatible with virtually all CAD/CAM programming software on the market. - You choose the software that best suits your needs.Working Table/Envelope: -- 51" (1,295 mm), 98" (2,489 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- Max Traverse Speeds: 2,350 IPM -- Max Working Speed: 1,100 IPM. -- Yaskawa "AC" Servo drives & SHIMPO Gear Boxes power all axes movements.Routing & Machining: -- (1) 12.8 HP (9.6 kW) Air cooled Router Spindle with: ISO 30 Adaptor, variable programming speeds from 6,000 to 24,000 RPM, -- (1) 8-Position ATC (automatic rotary tool changer) -- (1) Boring Head: "HSD" head with (9) Spindles (5 +5) in "L"- Shaped configuration..Complete With: -- 10 HP (7.5 kW) "Cam-Wood" Vacuum Pump. -- (4) ISO 30 tool holders -- (4) Pop-up pins to aid in panel positioning -- Automatic tool offset device. -- 11 kW Inverter. -- Automatic lubrication device with filter. -- Standard MPG hand wheelUtilities and Dims: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 53 Amps. -- Machine weighs approx. 4,560 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM;The Supreme-408RT is an Industrial Grade CNC Router with a Rotary-ATC that will get the job done!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD - SUPREME-510RT, ...5' x 10' CNC Router with Automatic Rotary Tool Changer & Boring HeadSupreme 5' x 10' Flat Table CNC Router, Perfect for all your 3-axis routing needs including "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined toothed rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways providing extra smooth movement, high speed traverse and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "SYNTEC" CNC controller with 8" color LED monitor; includes integrating ARM11 processor, RAM 128M, CPU Clock, Speed 600M, Flash 256M, WINCE operating system. -- Up to (3) simultaneously controlled axes with, helical interpolation, tool offset, length compensation & backlash compensation, AQE compensation, LAN communication, 2-way transmission between the system and PC, Front USB interface. -- Compatible with virtually all CAD/CAM programming software on the market. - You choose the software that best suits your needs.Working Table: -- 63" (1,600 mm), 126" (3,200 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- Max Traverse Speeds: 2,350 IPM -- Max Working Speed: 1,100 IPM. -- "Yaskawa" 850w AC servo drives & "SHIMPO" gear boxes power all axes movements.Routing & Machining: -- (1) 12.8 HP (9.6 kW) "HSD" Air cooled Router Spindle with: ISO 30 Adaptor, variable programming speeds from 6,000 to 24,000 RPM, -- (1) 8-Position Rotary ATC (automatic tool changer) -- (1) Boring Head: "HSD" head with (9) Spindles (5 +5) in "L"- Shaped configuration.Complete With: -- 10 HP (7.5 kW) "Cam-Wood" Vacuum Pump. -- (4) ISO 30 tool holders -- (6) Pop-up pins to aid in panel positioning -- Automatic tool offset device. -- 11 kW Inverter. -- Automatic lubrication device with filter. -- Standard MPG hand wheelUtilities and Dims: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 53 Amps. -- Machine weighs approx. 4,560 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM;The Supreme-510RT is an Industrial Grade CNC Router with a Rotary-ATC that will get the job done!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CAM-WOOD STANDARD-408 "Complete Package" CNC RouterEverything you need is all included in this Complete Package, all shipped straight to your door & installed!Complete Package Details: -- CAM-WOOD Standard-408 CNC Machining Center -- 10 HP (7.5 kW) Dry Rotary Vane Vacuum Pump -- VCarve Pro Cad/Cam Software -- "Launch" Tooling Package -- (2) Day Installation and Training -- Shipping & TransportationCAM-WOOD "Standard-408":Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications.DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table/Envelope: -- 51" (1,295 mm), 98" (2,489 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,400 IPM Max. traverse speeds. -- 1,000 IPM Max. working speed. -- "Yaskawa" 850w AC servo drives & "SHIMPO" gear boxes power all axes movements.Routing & Machining: -- (1) 8.6 HP (6 kW) "HSD" Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: ● 7.5 kW Inverter. ● Manual lubrication device. ● SCHNEIDER electronic components.Machine Utility Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 40 Amps. -- Machine weighs approx. 3,510 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.Vacuum Pump: -- 10 HP (7.5 kW) "CAM-W00D" Dry rotary vane vacuum pump. -- Airflow (cfm): 176. -- Vacuum Capacity (Hg): 26. -- Noise Level (dB A): 82"Launch" Tooling Package: (1) 1/2" straight bit (1) 1/4" down shear spiral (1) 3/8" down shear spiral (1) 90 degree v-bit (1) 1/4" compression bits (1) 3/8" compression bits (2) 1/4" ER32 collets (2) 3/8" ER32 collets (1) 10mm ER32 collet (2) 1/2" ER32 collet (1) 3" Fly CutterVCarve Pro Cad/Cam Software: Overview: -- The software can import 2D designs from other programs but also provides a full set of drawing and editing tools. The toolpath options cover all typical 2D routing operations such as Profiling, Pocketing, Auto-I
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445