BioMass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 30
598 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2012 Weima TH 1500 Briquette Press
Call For Price
2012 Weima TH 1500 Briquette Press
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
Call for Price

6060 AMERICAN PULVERIZER With Infeed ConveyorSpecs & Features: --60 Series Shredders from American Pulverizer are designed for today's scrap processor. They can handle high capacities of miscellaneous sheet iron, auto bodies, white goods, light #1 and #2 scrap materials, and more. --The 60 Series is smaller, but has some of the same big features of our larger shredders.Capped spider rotorsCapped end discsHeavy-duty self-supporting gratesReject doorsHydraulic pin pullersVibration isolation packagesRuns the same mix of scrap as our larger shredders --The A.P. 60 Series Shredder can handle approximately 15-20 tons/hr of miscellaneous sheet iron, auto bodies, white goods, light #1 and #2 scrap materials, and more. --Comes with 180lb Hammers.What's Included? --6060 Hammer Mill Shredder Feed Hopper --1000hp Electric Motor Start Panel Installed new in 2009 Has not ran since 2022. --Was inspected by A.P. and estimated wear parts at 70% -- Infeed Conveyor

Katie Lechelt
800-374-5009 ext:452
Call

$ 36,950

AMERI-MULCH COLORING SYSTEM -- 5 Yard Hopper -- Low Hours 1,550 -- Production of 60/80 Yards per Hour -- Good Working Machine -- Loaded on your Truck

EX-FACTORY INC.
704-841-2001
Call

Call for Price

ARJES - IMPAKTOR 250, ...Dual Shaft ShredderModel "Bandit" with the following features: -- Dual shafts with synchronous/asynchronous drive (80,000 ft/Lbs torque)! --Quick change cassette system: Allows simplified maintenance, replacement, or refurbishment. -- Mechanically adjustable side combs (runs open or closed). -- Weighs approx. 15 tons and can easily be transported. -- Wide profile discharge belt. -- Wireless radio remote controls all track & shredding functions. -- Automatic reversing function protects against fracture of the cutting tools. -- Length: 22’; width: 7’ - 10-1/2”; height: 9’-2”; weight: 29,763 Lbs. -- Hopper size: 98-1/2” x 62”. -- Engine: 220 HP (164.1 kW); VOLVO "T4f". -- Shafts: 59” 1.5 m Shaft Speed: 11 - 45 RPM -- Torque: (2) 80,000 Ft.-Lbs. -- Conveyor width: 31-1/2” Conveyor speed: 118 IPS; 3 MPS. -- Discharge Height: 11’-5”. -- Fuel Tank: 92-Gallon. -- Hydraulic Tank: 18-Gallon. --Unlock unparalleled shredding capabilities with the 2020 Bandit ARJES Impaktor 250 Shredder, equipped with advanced features including caset and paddle shafts. This industrial powerhouse is ready to elevate your operations to new heights. This is your opportunity to own cutting-edge machinery that delivers efficiency, versatility, and reliability. --Key Features: 1. Efficient Shredding Mechanism: • The inclusion of caset and paddle shafts ensures a robust and efficient shredding process, making quick work of various materials, from wood to construction debris. 2. Versatility for Multiple Applications: • The Impaktor 250 is designed to handle diverse materials, making it ideal for applications in recycling, waste management, forestry, and more. Adapt to different challenges with ease. 3. Exceptional Mobility: • Benefit from the mobility of this shredder, allowing you to take it to different job sites effortlessly. Its compact design ensures easy maneuverability in various environments. 4. User-Friendly Controls: • Take command with the intuitive control system, allowing operators to adjust settings and monitor performance for optimal efficiency. 5. Safety at the Forefront: • Safety is paramount. The Impaktor 250 is equipped with features such as emergency stop buttons and safety interlocks to ensure a secure operating environment. 6. Output Size Control: • Customize your output with mechanisms that control the shredded material's size, giving you flexibility for specific applications.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

#4 LH Armstrong bandsaw grinder with Digicam. The customer has the Digicam software disk for the grinder.

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 190,000

2022 Astec SF16 Screen -650 hours -75HP, Duetz TD2.9 engine -Like new machine is 100% turn key -Weighs 48,550 lbs

Carolina Used Machinery
828-773-2204
Call

$ 72,500

2023 Bandit Intimidator 18XP Chipper 180 Hours Ford 6.2L gas engine GVWR 9,000lbs Oil changes and general maintenance completed as specified by manufacturer. General warranties still active. PRICE REDUCED

Roberta Stevens
828-896-6888
Call

$ 625,000

CAT (755HP) 37" DIAMETER X 36" WIDE DRUM WITH (6) KNIVES 30" DIAMETER X 36" WIDE TOP FEED WHEEL 10 5/8" DIAMETER X 36" WIDE BOTTOM FEED WHEEL STANDARD 7 ½" INFEED CONVEYOR FORESTRY STYLE DISCHARGE WITH HYDRAULIC SIDE/UP OR DOWN END DEFLECTOR AIR COMPRESSOR DOUBLE GROUSER TACK PADS 62,000 LBS

 Columbus, OH
Columbus Equipment Company
937-424-7678
Call

$ 390,000

Micro Chipper C-27 Tier II 875 HP 5173 Hours

Carolina Used Machinery
828-773-2204
Call

$ 34,500

2022 Bandit 12XPC Chipper, New Machine at Used Price!, Diesel, 12 In. Ready to Chip, Sharp Knives, Just Serviced. $34,500

 Marietta, PA
Con-Verge Industries LLC
717-239-9970
Call

$ 39,400

2018 Bandit 250XP Chipper, 926 hrs, very good condition, good paint, diesel 120 HP, serviced. 12-1/2" x 19" opening Ready to go to work! $39,400

 Marietta, PA
Con-Verge Industries LLC
717-239-9970
Call

Call for Price

2009 Bandit 2590 Drum Chipper, C13 Cat 540hp, Radio Remote, Infeed chain, Rear hydraulic stabilizer's. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 115,000

2010 Bandit 2590, Whole Tree Drum Chipper, C-13 Cat 440HP 5465 hours, Remote, Infeed, Front and rear hydraulic stabilizers. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

Call for Price

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

 Brainerd, MN
U.S. Equipment Sales
877-451-9525
Call

Call for Price

New In Stock Bandit 3090 Tracked Whole Tree Chipper.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

2004 Brush Bandit 254XP Chipper, Cummins 130 HP Turbo Diesel, 1,600 Hours, Twin Disc Clutch, Winch, Hand Crank Height Chute, Telescoping Tongue Cylinder with a 2-1/2" Pintle Hitch, Hand crank swivel chute, Auto-feed System, Aluminum Rims. Weight, 7,800 lbs. Width, 89" Height, 100" Length, 188" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 249,900

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Rockville, MD
NEF Equipment
855-251-2648
Call

Call for Price

2022 Bandit 2680 Tracked Horizontal Grinder, In Stock Ready to Go, Call Today.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 17,900

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready

Mitch Stevens
828-773-6986
Call

Call for Price

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 125,000

2003 Bandit 3680 Grinder - 3412 Cat Engine - Hydraulic Clutch - New Remote Control - 3x3 inch Screen with Baffles - 4x6 inch Screen - Good Augers & Infeed Chain; overall good condition, needs some work on Infeed Wheel

Sawmill Exchange
713-729-6455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved