Brush Cutter and Land Clearing For Sale
33 Results Found
2011 Bandit Forestry Mower 5000 VIN: 401018, C15 Caterpillar 600 HP., SN: JRE13989 Joy stick controls, winch w/ remote & camera, 1850 Hours since new. Weight 67,800 LBS., $325,000 We have just completed a total rebuilt on the 2011 Bandit 5000 Forestry Mower. This unit is absolutely like new! No costs were bypassed! More than 1400 Hours in restoration. Here is a partial list of the repairs and updates to this machine. - All new Hyd. hoses. - New engine and chassis wire harnesses. - All new Hyd. coolers and fans / motors. - New cold weather package w/ Esbar Heater. - All Hyd. pumps rebuilt or new. - All boom cylinders rebuilt. - New camera system. - New can Insulation, Interior, and glass. - New drive sprockets. - New Drum Shaft, bearings wedges. - New Drum Hyd. motor. - Variable Speed Drum. - Complete New Polyurethane Paint... properly cleaned, prepped, and primed, before paint applied. - 1850 Total Machine Hours since new. - Selling for 50% of what a new unit would cost.
Used FAE Forestry Mulcher for 160-240hp Tractor & 1000 PTO hook-up. wt 4806lbs working width 6.8 ft. You can call Don 937-382-4549
2007 Fecon FTX250 Track Mulcher w/2,300 Hrs., Cross-Link Tracks $97,500 Call Earl 309-678-5919
Fecon FTX148L w/Very Low Hours, New 148HP CAT Engine, Good Condition $89,000 513-315-1500/513-722-1200
2002 Komatsu 228 w/ Shinn Stump Grinder w/ Bucktooth Wheel, JD 400hp Power Pack, 1 Owner, well maintained, REDUCED to $94,750 obo, 216-244-4413 or 216-244-4450 - Also Available: Very Clean National 40 Ton Crane - items can be viewed at www.edwardslandclearingandtreeservice.com
2014 BANDIT 3500 Fixed Head Stump Grinder, 40" diameter with Buck tooth wheel, 275HP, 6.8L, John Deere diesel, Cab, heat, A/C, 15,000 pound rear mounted winch, 24 volt Proheat system, Cat 315L U/C with 24" triple grouser pads, one owner bought new, good condition.
2013 BANDIT 3500T- New $40,000 updated Bandit belt driven buck tooth grinder head done by Bandit, Cat 325 undercarriage, 9 liter 325hp John Deere power unit, heat and air, machine is set up to be a dedicated stump grinder will not run a mulcher head, 2900hrs, dependable well maintained machine
Barka 930B Brush Cutter/Mulcher Product No. 4508 Barka 930B Brush Cutter/Mulcher 2016 2600 hours FAE 300U Texas Series Head price: $279000 Machine Type: Brush Cutter/Mulcher Manufacturer: Barko Model: 930B Year: 2016 Machine Location: South West
2011 Bron 700 Mulcher, Tyalta Mulching Head, Currently Has 2640 Hours, Cat C18 700HP Engine, Berco Undercarriage D7 with 36" Single Grouser Pads. Engine and Hydraulic Heater for Cold Weather Starting, Backup Camera and 2 Internal Cameras, Touch 1 Digital Display, Fire Suppression System, And On Board Air Compressor. Unit has been completely serviced and is ready to go to work. Please Call for more info
2006 Caterpillar 320CL Tracked Excavator w/Shinn Cutter, 7900 Hours, Full Cab, New Cutters, Ready To Work. Call for More Info.
2008 Caterpillar Excavator W/Fecon Mulching Attachment Model#BH200EXC2 W/DCR Rotor and Power Pak, 5467 Hours, 190 HP Engine, Cab/Heat A/C, All Functions Work, CAT Inspection Available. Please Call For More Info
2014 Cat 563C Mulcher - NEW FAE 200/U-225 Mulching Head, NEW high pressure pump and hoses, Good 34:00 tires, 200 HP Cat 7.1 engine, Cab with air / heat, Ready to work! 0 hours since the conversion from a Feller Buncher. Monthly rental / Rental purchase available! $205,000 Jason Bruner: 903-452-5290 Bill Bruner: 903-235-2805
Enclosed Cab, Air Conditioner, Heater, Auxiliary Hydraulic Plumbing, Vertical Lift, Two Speed, 17 1/2” Track Belts, Electric Coupler, 85” Wide General Purpose Bucket w/ Teeth, Ultra Low Sulfur Diesel
2018 CMI C450 Mulchers w/FAE 300U Mulching Head, New Undercarriage, Rails and Sprockets, $305,000
2015 Fecon FTX400LGP with BH300DCR-C Mulching Head, Comes With the Following Options: Rear 30,000lbs Hydraulic Winch, 30 Single Grouser Track Pads, Cummins Powered QSM11 Tier 3 Engine Rated at 403HP, Arctic Package Includes Engine and Hydraulic Heater, Positive Air Shut Off, Rear Backup Camera. Currently the unit has 53hrs on the engine and 42 hrs on the unit. Priced to sell!
2008 Gyro Trac GT25XP, 3789 Hours, 270 HP Cummins Engine, 700HF Plainer Style Head, Upgrades to Rexroth Track Drive Motors, Reversible Flex Fan, Charge Pump Filtration, Back Up Camera,This Unit Has Had Excellent Care and Many Upgrades. Please Call For More Info.
Call for Price
2016 Gyro Trac GT35 with 1915 hour350 hp Cummins Captive Tracks just refurbished Includes pressurized cab with heat and a/c700HF plainer style head just refurbished Winch Unit just run through service department and looks new. Call for price
2007 Gyrotrac GT25XP, 6.7 Turbo Cummins, Hydraulic Push Bar, 3000 Hours, New Wheel Motors, New Tracks and Grousers, New Driver and Axle Bearings and Bushings, Espar Heater, And Hydraulic Winch.