BioMass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 19 of 30
597 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2012 Weima TH 1500 Briquette Press
Call For Price
2012 Weima TH 1500 Briquette Press
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
$ 245,000

PERDURE model P006 Wood Torrefaction Line with Propane Heating;Oven roasting type complete with the following components and features: -- (6) Meter-long treatment Chamber. -- 1.2 Million BTU propane Heater (or convert to natural gas). -- Afterburner. -- Entrance and exit Conveyor with motorized Trolleys. -- (2) Sliding Doors closed with electric Jacks, -- (2) Stirrers, -- (2) Burners, -- (1) Main Fan -- Water Circuit. -- PCI INDUSTRIES Multi-zone Climate Control System based on thermocouple temperature measurements. -- The setup is equipped with a system for heat recovery and combustion (afterburner) of volatile organic compounds (VOCs) emitted by the wood, which results in reduced energy consumption. -- Final treatment of the product load is cooling by water injection.NOTES: &#9679 The PERDURE process is distinguished by relatively short processing times (7 to 16 hours depending on the species and the thickness of the parts processed) and the low loading capacity of the ovens (approximately 3 to 8 Mbmp). &#9679 The original 2006 purchase was $ 991,000.00 in Canadian funds.

EX-FACTORY INC.
704-841-2001
Call

$ 600,000

JUST REBUILT - CALL FOR DETAILS UNIT SUSTAINED FIRE DAMAGE, ENGINE WAS UNSCATHED, PROMTED COMPLETE REBUILD OF REST OF MACHINE. CAT C27 ORIGINAL HOURS - 1050 HP - TIER 3 NO DEF TOO MANY NEW PARTS TO NAME NEW PT CLUTCH, PUMPS (ALL), WIRING HARNESS, DRAG CHAIN, FEED BED, ALL HOSES, FEED DRUM, COMPRESSOR AND MORE.

Forestry First
855-588-7871 ext:1
Call

Call for Price

JUST IN CALL FOR DETAILS Monitor shows 5853 hours

Forestry First
855-588-7871 ext:1
Call

$ 255,000

2005 Peterson 5410 Grinder -5800 hours -CAT 3412 Engine 1000H.P -Needs a discharge belt -New feed chains -New tip protectors

Josh Digirolamo
828-302-7264
Call

$ 172,000

1999 Peterson Pacific 5000G Chipper -1000 h.p. 3412e engine -8000 hrs since major overhaul -3 flail -Spare flail pump -Load adapters replaced within last 1000 hours -Fan pump replaced 1500 hrs ago,Also has had swing and boom pump replaced -New Ecm has less than 750 hrs -New muffler -New feed roll teeth -New heater and a/c -Spare clutch, Spare belts, Spare pins and Seal kits -Babbit or key knife system -Fleet maintained

Josh Digirolamo
828-302-7264
Call

$ 69,900

1998 PETERSON PACIFIC 2400A WOOD GRINDER CAT 3406C ENGINE GOOD MILL GOOD FEED CHAINS LOTS OF NEW PARTS RUNS VERY WELL WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR MOST CREDIT TYPES GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 380,000

2002 Peterson 7400a Horizontal Grinder -End of summer 2022 we installed NEW -Cylinder packs and bearings -Both turbos -High pressure oil pump -Ecm -Injectors -All gaskets and orings -Oil pump -Twin disk clutch -Had the heads completely rebuilt -Radiator completely gone through -Rebuilt feed floor -Rebuilt mill -Mill bearings checked for clearance and passed -All belts and chains in good shape -Alot of extra screens and parts come with it. Some are brand new

Josh Digirolamo
828-302-7264
Call

Call for Price

2020 Peterson 2710 on tracks with 3,100 hours, Cat C18...platinum engine warranty Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Palmer, MA
NEF Equipment
855-251-2648
Call

Call for Price

2004 Peterson Pacific 5400C Horizontal Grinder, Equipped with a Cat V-12 Engine with 6.400 Hours, Wireless Control System, Refaced Hammers Re-Did Mill at a cost of $15,000.00, 1 Banana Bar Changed, New Wear Bars, Newly Rebalanced Drum, Refaced Hammers, Compressor, Metal Pully on Discharge, More Pictures Coming Soon. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 29,995

Peterson 4800 Flail Debarker Wireless remote controlled Reman engine Runs and operates good

Mitch Stevens
828-773-6986
Call

$ 70,000

Cat 3306 with recent engine work  (new head, liners etc) Remote control No stabilizers

Forestry First
855-588-7871 ext:1
Call

$ 140,000

New remote All outriggers intact and work. Two lower green wear plates worn but being replaced New radiator screen (pictured) will be installed.

Forestry First
855-588-7871 ext:1
Call

$ 310,000

Remote control

Forestry First
855-588-7871 ext:1
Call

Call for Price

2019 Peterson 2710D Grinder -4550 hours -C18 CAT Engine764 HP -Motor replaced at 3500 Hours by CAT with Papers -Clean machine ready to work

Josh Digirolamo
828-302-7264
Call

$ 399,000

2018 Peterson Pacific Model 5710T Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP, Has 9,700 Hours, Wireless Control NO DEF ENGINE, Compressor, ProHeat, Fire Suppression, Wireless Remote Control. Magnetic Head Pully on Discharge, All Service Records Available Ready for Work Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

Call for Price

1998 Peterson Pacific 7400 Horizontal Grinder, Equipped with Radio Remote Control, Caterpillar 3412 Engine, Rebuilt with Only 2000 Hours, Hour Meter Reads 5700, Newer Drum, Used only for clearing jobs. Weight: approx. 88,000 lbs. Length: 43 ft. Width: 10 ft 2 in. Height: 13 ft 6 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 195,000

2009 Peterson Pacific Model 4300 Whole Tree Chipper, Caterpillar C-18 765HP Turbo Diesel Engine with 1,000 Hours, Frame Hours are 3000, 8 Knife Drum, Rotor Speed Option, Spout End Load, Hydraulic Landing Gear, Infeed Bed Chain, Wireless Remote Control. Ready to Chip Machine Weight 52,000 lbs Length 36'-1" Height 12' Operating Width 11'-3½" Travel Width 8'-4¾" Feed Length 8'-2¼" Feed Height 4'-1" Feed Conveyor Width 3'-4" Front to 5th Wheel 2'-2¼" 5th Wheel to Center Axle 27'-8½" Axle Spacing 2'-2" 5th Wheel Clearance Radius 6'-8" 5th Wheel Height 4' Operating Length 36.77' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, MI
NEF Equipment
855-251-2648
Call

$ 450,000

This machine is 100% redone. Completly rebuilt motor, new pumps, hoses, wiring harness. New knives and infeed chain

 Moriches, NY
Global Land Equipment
631-898-5687
Call

Call for Price

Complete Player Design Drying System - (2) Touch Screen Controllers - (1) PLC Control Box - (1) 12’ X 20’ Burner – 25 million BTU capacity with tempered sight glass that can run green chips/dust - (1) Burner Auger , Gearbox, and Motor - (1) Burner Blower Fan Assembly and Motor - (1) Player Single Pass Insulated Dryer Drum (12x50), 8” T section track, 28” Trunnions, Drive lubrication system, Sprocket, Chain and Gearbox / Motor (Drum rated for output material volume of 16,000 lbs per hour) - (1) Air Pro 48” Overhung Fan Assembly (ID Fan) (No Motor) ---- (Part# 12113601, Type-IERS615, Serial# 21136,) - (1) 200 HP motor for ID Fan - (1) Beck- Damper Adjustment Arm/Gearbox (ID fan comes with opposed blade inlet damper with a 300 ft-lb Beck actuator and armature) ---- (Model 11-209-155212-04-01---- 120V 1PH / 110VA ) - Piping and dampers for piping - Missing approximately 20’ of Dryer Drum Discharge piping - Missing approximately 20’ of Dryer Drum Recycle piping - System was rated at approx 9.25 Tons/hour

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved