Strapping Machines Banding For Sale

Banding-Strapping Machines 

Air Compressor (110) Airlock (18) Band Chopper (1) Band Mill Thin Kerf (26) Band Mills (Wide) (24) Banding-Strapping Machines (81) Blowers and Fans (108) Boiler (12) Bolter Saw (1) Carriage (Sawmill) (41) Carriage Drive (Sawmill) (38) Chip Bin (15) Chip Cyclone (5) Chip Screen (25) Chipping Canter (1) Chop Saw (29) Circular Saw Husk (9) Circular Sawmill (63) Conveyor (61) Conveyor-Auger (4) Conveyor-Live Floor (5) Conveyor-Run-Around (1) Conveyor-Vibrating (70) Conveyors Belt (179) Conveyors Board Dealing (61) Conveyors Decks (Log Lumber) (191) Conveyors General (27) Conveyors-Barn Sweep (16) Conveyors-Live Roll (127) Debarker (57) Dip Tank (6) Drum Dryer (12) Dry Kiln (12) Dump Hopper (12) Dust Collection System (217) Edger Tailing Device (2) Edgers-Board (56) Edgers-Gang (36) Edgers-Slab (2) Edgers-Vertical (5) Electrical (107) Forklift (47) Gang Rip Saw (35) Gang Saw (37) GenSet (56) Hammer Mill (3) Hogs and Wood Grinders (131) Hydraulic Power Pack (67) Knife Grinder (26) Laser Lights (5) Log Home Machinery (3) Log Irrigation (2) Log Merchandising System (14) Log Turner (Sawmill) (23) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (20) Misc (61) Operator Cab (7) Package Saw (6) Portable Sawmill (29) Post and Pole Peeler (21) Power Units-Engines (11) Radial Arm Saw (3) Resaw-Band (139) Resaw-Circular (2) Scissor Lift (36) Scragg Mill (28) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (90) Shavings Bagger (4) Shavings Mill (28) Slab Saw (2) Stake Pointer (1) Stave Quartering Saw (1) Tie Processing (4) Trimmer (71) Unscrambler (34) Wheel Loader (64) Wood Chipper - Stationary (110) Wrap and Packaging (11)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 5
81 Results Found
Sort By 
STANDARD LISTINGS
2000 American Baler 6042H-AT-830R  Banding-Strapping Machines
$59,500

AMERICAN BALER 6042H-AT-830R HORIZONTAL AUTO-TIE BALERSpecifications: -- 8" Cylinder -- 30 HP Motor -- Feed opening 59.5" x 40.5" -- Bale size 43" W x 42"H x Variable -- Cycle time 16.1 Sec -- Ram Thrust 150,795 Lbs -- Complete with feeding conveyor -- Dimension; 11 feet long with 2" cleats @ 36" centers, width 60", side guards 10" approx.; Incline 40 degrees -- Weight 29,000 Lbs total -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

American Baler 5042L5WF  Banding-Strapping Machines
$42,850

AMERICAN BALER 5042L5WF HORIZONTAL CLOSED DOOR BALERSpecifications: -- 40 HP Motor -- 8" Cylinder -- Feed opening 49.5" x 40.5" -- Bale size 42"W x 42"H x 60"L -- Ram thrust 145,770 Lbs -- Cycle time 27 Sec -- Dimensions 9'1" W x 21'8" L -- Door hinge Right and Controls Left -- Complete with conveyor 28 feet long with 2" cleats @ 30" centers, width 42" with side guards 18", incline 35 degresLoaded on your truck.

Michel Hamel
800-374-5009 ext:472
Call

American Baler 72A36 OSH  Banding-Strapping Machines
$15,250

American /Economy 72A36 OSH Horizontal Closed Door Baler -- 15 HP motor -- 6" Cylinder -- 30" x 36" x 72" Finish Bale -- In-Feed Conveyor -- 1 HP motor and gearbox; -- Belt width of 47"; floor to centerline tailshaft = 34";Floor to bottom flange mount to top of baler hopper = 7’5";Horizontal run from tail roller shaft to discharge end of conveyor roller = 15’3" -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

American Baler 2040 LXPS-T75  Banding-Strapping Machines
$85,900

AMERICAN BALER 2040 LXPS-T75 (2) RAM HORIZONTAL BALER -- (2) 75 HP motors -- Auto-tie system L&P AUTO TYING -- Main cylinder 10" -- Eject cylinder 8" -- Hopper opening 45" x 62" -- Complete with shear -- Infeed conveyor ( no supports) -- LOADED ON YOUR TRUCK

Michel Hamel
800-374-5009 ext:472
Call

2008 Balemaster 5275-G-10  Banding-Strapping Machines
$118,900

Balemaster 5275-G-10 Auto Tie Baler with In-Feed Conveyor -- 75 HP motor -- 10" Cylinder -- 5 wire ties -- Open-Top hopper. 84' x 60" -- Feed Opening: 75" x 45" -- 84" wide rubber belt conveyor Marathon -- 3" cleats -- Approximately 35' long + bale Table -- Marathon Bin Dumper -- Stairs -- 13 boxes of wire -- Extra needle inserters and twister hooks, misc. parts and tools including cylinder head wrench -- Cylinder rebuilt 3 months ago ands relined in 2015, very nice baler -- Loaded on your truck's

Michel Hamel
800-374-5009 ext:472
Call

Balemaster EO-720  Banding-Strapping Machines
$114,400

BALEMASTER EO-720 WIDE MOUTH AUTO-TIE HORIZONTAL BALERAccommodates a variety of waste materials, including: Whole upright shipping boxes, flattened OCC, tissue slabs, old newspapers, mixed paper, fiberglass sheets, aluminum cans, & PET beverage bottles, etc.Specifications: -- 10" Cylinder -- Feed chute 60" L x 41-1/2" W -- Finish bale 30" H x 44" W x Variable -- Shear blade -- 4-Wire tie -- Touch screen controls with Allen Bradley PLC -- Used Rough Top conveyor included -- Lower horizontal feed incline conveyorPrice is Loaded on your truck!

Michel Hamel
800-374-5009 ext:472
Call

Balemaster 1772-AO  Banding-Strapping Machines
$24,990

BALEMASTER 1772-AO WIDE MOUTH CLOSED DOOR HORIZONTAL BALERSpecifications: -- 25 HP motor -- (2) 6" Cylinders -- Feed opening 60" x 46" -- Bale size 72"L x 48"W x 36"H -- Bale weight 1200/1600 LbsLoaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2009 Balemaster 4275-G8  Banding-Strapping Machines
$59,500

BALEMASTER 4275G-8 AUTO-TIE HORIZONTAL BALERSpecifications: -- Auto-Tie model -- 75 HP motor -- 8" Cylinder -- Infeed conveyor and shredder -- Only 3,175 working hours -- AVAILABLE APRIL 2019Price is Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

1995 Bollegraaf HBC 140AK  Banding-Strapping Machines
$94,900

BOLLEGRAAF HBC 140AK AUTO-TIE HORIZONTAL BALER -- (2) 100 HP motors -- Bale size 44" x 44" x Variable -- Main cylinder 11" dia. -- Feed opening 63" x 42" -- Pre-Press Flap -- Loaded on your truck

 MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Call

2006 C  and  M CM5046-AT88  Banding-Strapping Machines
$62,900

C&M 5046-AT88 AUTO-TIE HORIZONTAL BALER -- Twin 50 HP motors -- 8" Cylinder -- Hopper opening 50" x 46" -- 7.5 Sec. cycle time (very fast) -- Platen force 125,000 [email protected] 2500 psi -- Bale size 46" W x 40" H x variable length -- Available immediately -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

C  and  M 3432-7256  Banding-Strapping Machines
$15,900

C + M 3432-7256 CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- 6" Cylinder -- Feed opening 34" x 30" -- Bale size 72" x 30" x 36" -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2007 C  and  M CM5030  Banding-Strapping Machines
$57,950

C+M CM5030-AT37SL Automatic-Tie Open-End Horizontal BalerFeatures Fully automatic cycling and bale tie-off operation.Specifications: -- 7" Bore Cylinder -- Baler Feed Opening: 50" x 30" -- Feed Conveyor: 48" wide -- Bale Size: 40" High, 30" Wide w/Adjustable Bale Length of 48"- 80" -- C+M "Shear Less Pack" Option -- MATERIAL TO BE BALED: OCC Baler Description: -- Open-End Horizontal Single Ram, Automatic-Tie Baling Press to Include the Following: -- Heavy-duty open-end baler design with a 30 HP hydraulic power unit including TEFC motor, 208, 230, 460 Volt, 3 PH, 60Hz electrics with high/low pressure pumps for compression cylinder all controlled by standard hydraulic components -- 7" Diameter bore industrial grade main compression cylinder to cycle in approximately 20 seconds -- Auxiliary hydraulic system with a 15 HP TEFC motor and high-pressure pump for precise independent control of the automatic-tie circuit including tensioning devices, hydraulic torque motors, and manifold-mounted control valves -- Five-wire automatic-tie package with C+M "swing-away" pin release wire tier & wire inserter units (for quick and easy servicing) and spring- tensioned ten wire spools -- Full Height 48"H X 50"L X 30"W Feed chute for material in feed (41.6 cubic feet of storage above charge box) -- Allen Bradley 1200 series PLC & color touch screen;Features: -- Fully automatic cycling and bale tie-off operation -- "Push-to-Tie" button" for manual short-bale separation -- High-temperature / low-oil safety shutdown sensors -- High cooling efficiency, closed loop air-to-oil heat exchanger system with motor, pump, filter, sensor, and temperature on/off control (not dependent on return oil flow for cooling) -- Banner special thru-beam material level sensor -- 10" Extension of baling chamber & upper chamber density retention "dogs" to aid in reducing "bottom-heavy" bales (adds 20" to baler overall length) -- Oversized spring-loaded side-chamber retainer dogs and quick-change replaceable wear guides & wiper blocks for ram platen -- Allen Bradley Trojan safety switches for hopper access door, wire threader, and wire tier -- Lockable Circuit breaker w/ thru-door electrical disconnect -- NEMA type 12 UL listed Hoffman control enclosuresNOTE: Conveyor not includedPrice includes Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

C  and  M 3430-7256  Banding-Strapping Machines
$66,950

COMPLETE ASSEMBLY SHREDDER-CONVEYOR-BALER -- AMERI-SHRED AMS4000 Shredder System -- 40 HP Motor, 460-3-60 -- Feed opening 20" -- Shred width ½" -- Capacity 475 sheets at a time -- Tons per hour 4 to 5 tons -- Enclosed feeding conveyor from shredder to baler -- C&M HORIZONTAL BALER 3430-7256 -- 20 HP motor, 460-3-60 -- Feed opening 34" x 30" -- Bale size 72" x 30" x 40" -- Main cylinder 6" -- Platen force 62,203 lbs -- Estimated finish bale weight 1,000 lbs (PAPER) -- Both unit completely refurbished with 6 months warranty on parts. -- LOADED ON YOUR TRUCK

Michel Hamel
800-374-5009 ext:472
Call

Cobalt SC3000  Banding-Strapping Machines
$39,900

COBALT SC 3000 STYROFOAM DENSIFIER -- Model SC 3000 -- Up to 550 lbs/hour -- 48" Feed opening -- Makes 18" x 16" x Variable length briquette -- Infeed conveyor 21 feet long x 42" width -- Loaded on your truck

 SOUTH, AL
EX-FACTORY INC.
704-841-2001
Call

Consolidated DOUBLE CHAMBER 144  Banding-Strapping Machines
$14,900

CONSOLIDATED DOUBLE CHAMBER MODEL 144 CLOTHING BALER -- 5 HP motor -- 6" Cylinder x 4-1/4" Rod -- Great working condition -- loaded on your trucl

 SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
Call

CP Manufacturing CD3600  Banding-Strapping Machines
$45,900

CP MANUFACTURING CD3600 CAN DENSIFIER -- 25 HP motor -- Infeed conveyor -- Capacity 40 lbs biscuit 7" x 13" x 20" -- Rebuilt cylinder and door cylinder -- Pre-compression assembly -- New oil/tested and working. -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2000 Excel Mfg EX62  Banding-Strapping Machines
$52,600

EXCEL MFG EX62 CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- Closed door full eject -- (2) 6" Cylinders -- Infeed opening 54" x 35" -- Bale size 60" x 48" x 30" -- Bale weight 1,200 lbs (OCC) -- Production capacity up to 2.4 TPH OCC -- Shear blade -- System pressure 3,000 psi -- Platen force 159,400 lbs -- Safety interlock door, tongue & groove floor, Hardox 400 wear surfaces -- Will be completely refurbished prior shipment, allow 6 to 8 weeks -- 6 Months warranty on parts. -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Excel Mfg EX62  Banding-Strapping Machines
$33,900

EXCEL EX62 Horizontal Closed Door BalerSpecifications: -- 20 HP Motor -- Twin 6” Cross-Cylinders -- Standard Hopper Included -- 159,400 Lbs of Total Ram Force -- 60” x 38” x 40” Bale Size -- (46) Second Cycle Time -- Full Bale Eject / Full Platen Pen -- Tongue & Groove Floor -- Shear BladeFob: Indiana, Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2002 Excel Mfg 2R9  Banding-Strapping Machines
$109,900

EXCEL 2R9D TWO RAM HORIZONTAL BALER -- 9" Main cylinder -- 9" Eject cylinder -- 50 HP motor -- Feed opening 40" x 60" -- Bale size 60" x 45" x 30" -- 60" Wide rubber belt incline pit conveyor -- 60" Wide metering conveyor -- Extra cost for loading on your truck

Michel Hamel
800-374-5009 ext:472
Call

2006 EZ Car MODEL A+  Banding-Strapping Machines
$118,900

EZ CAR CRUSHER MODEL A+ --Opening 20 ft long x 7'6" width x 8 ft height -- 10" Cylinder -- John Deere 173 HP Turbo Diesel Engine -- Only 3092 hours -- Well maintained & Runs great

 MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved