Strapping Machines Banding For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 9
164 Results Found
Sort By 
$

AMERICAN BALER DC6348-8T30 AUTO-TIE HORIZONTAL BALER -- 30 HP Motor -- 8" Main Cylinder -- Feed Opening 63" x 46-1/2" -- Bale Size 48" x 42" x Variable (72" max.)

Katie Lechelt
800-374-5009 ext:452
Call

$

AMERICAN 7242-HAT-10100F Horizontal Open End Auto-Tie BalerModel: 7242-HAT-10100F --(2) 50hp Power Units / 460 volt --10" Cylinder --72" x 42" Feed Opening --Shear Blade --Bale: 42"W x 42"W x Var L --Setup for bulk wire stems. --No Fluffer / NO Conveyor Work done to the baler in 2019: --Relined Bale Chamber, New Ram Liners, --Rebuilt Cylinder, Rebuilt, Tier, New Oil Coolers, --Rebuilt Pumps, Rewound Motors. --Was processing daily until shut down. -- Not connected to power.

Katie Lechelt
800-374-5009 ext:452
Call

$

AMERICAN BALER - 12467-LS, ...Auto-Tie Horizontal Baler Specifications: -- Main motor: 60 HP. -- Cylinder: 8".

Katie Lechelt
800-374-5009 ext:452
Call

$ 69,500

BALEMASTER EO-1700 Auto-Tie Horizontal BalerSpecifications: --Model: 5250 (EO-1700) --Mfg: 2003 --(2) 25HP motors --10" Cylinder --75" x 45" Feed Opening --Bale: 48"W x 40"H x Var L --Touch Screen --Air/Oil Cooler --Bale table --Boxes of bale wire included

Katie Lechelt
800-374-5009 ext:452
Call

$

BALEMASTER - EO-650, ...Horizontal Auto-Tie Baler Specifications: • 25 HP Motor• 8” Main Cylinder• Hopper Opening: 46”x 50”• Bale Size: 48” x 30” x (variable)• Main Ram Face Pressure: 75psi• System Pressure: 2,000psi• Total Compression Force: 100,500 lbs

Katie Lechelt
800-374-5009 ext:452
Call

$ 36,500

BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.

Katie Lechelt
800-374-5009 ext:452
Call

$

BALEMASTER 4550G-10 Auto-Tie Horizontal BalerSpecifications: --27” x 40” Opening --50 HP --10” Cylinder --30” x 40” x Variable Bale

Katie Lechelt
800-374-5009 ext:452
Call

$ 78,500

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

Katie Lechelt
800-374-5009 ext:452
Call

$ 79,900

BALEMASTER - AT, ...Automatic Tie Baler with ConveyorSpecifications: -- Cylinder: 10" -- Main motor: 50 HP -- Feed opening: 60" x 40" -- Infeed Conveyor: 44" W

Katie Lechelt
800-374-5009 ext:452
Call

$ 109,900

BALEMASTER - HD-60, ...Closed Door BalerSpecifications: -- Main motor: 20 HP -- 8" Cylinder -- Bale size 48" x 30" x 60" -- Feed opening: 57" x 35"Equipped with: -- Touchscreen controls with ALLEN BRADLEY - Micrologix, ... PLC 7" QuickPanel -- Electrical disconnect switch installed on Baler -- Ground feed oversized hopper -- Totally enclosed fan cooled (TEFC) High-Efficiency motor -- Windowed Feed Chute Door with control circuit Interrupter (Limit Switch) -- Shear Blade -- Cycling eye mounted in the frame -- Low Oil Level & Hot Oil Temperature Sensors

Katie Lechelt
800-374-5009 ext:452
Call

$ 15,950

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

Katie Lechelt
800-374-5009 ext:452
Call

$

BALEMASTER - 760AO, ...Horizontal Closed Door BalerSpecifications: -- Cylinders: (2) 6" -- Feed opening: 60" x 40" -- Bale size: 48" x 72" x 34" -- Main motor: 25 HPEquipped with: -- (4) Wire single-loop bale ties -- Heat exchanger -- Photo-eyeNote: Dog ear springs need to be replaced and a small leak by the motor; otherwise, in great condition.

Katie Lechelt
800-374-5009 ext:452
Call

$ 89,500

BALETECH - 60X48, ...Full Pen Closed Door Baler Specifications: -- Bale size: 60" x 48" x 36" -- Feed opening: 60” x 60” -- OCC Bale weight:1,500 - 1,600 Lbs -- Conveyor width: 60" -- Main motor: 40 HPEquipped with: -- Shear bar -- Rubber cleated conveyor -- Full penetration

Katie Lechelt
800-374-5009 ext:452
Call

$ 79,500

BOLLEGRAAF - HBC-80, ...Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Bale size: 43" x 51" x 29" -- Motor: 60 HP -- Conveyor width: 60"Equipped with: -- Pre-press flap -- Fluffer -- KARL SCHMIDT MFG. Conveyor (belt will need to be replaced; is operational)

Katie Lechelt
800-374-5009 ext:452
Call

$

CP MANUFACTURING - OCC4, ...Fiber Screen Sorting SystemEfficient screening technology for separating 2D & 3D materials.Specifications: -- Capacity: 10 to 12 Tons per hourEquipped with: -- Double OCC -- Fiber screen -- Glass breaker -- Post sort -- Bunkers -- Mezzanines -- Misc. spare parts -- All manualsNOTE: Complete System with low hours!

Katie Lechelt
800-374-5009 ext:452
Call

$ 39,900

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP 3/60/208/230/460 Volt Hydraulic Power Unit

Katie Lechelt
800-374-5009 ext:452
Call

$

Cram-A-Lot HX-60, ...Closed Door Baler with Cart Dumper and Infeed ConveyorSpecifications: --The CRAM-A-LOT HX-60 HH & HX Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. --The CRAM-A-LOT® HH & HX Series Balers are built with extra heavy-duty construction and are ideal for warehouses and recyclers who deal with large quantities of corrugated and paper products.This machine is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered feed conveyors and cart dumper systems efficiently control baler feed rates for optimum performance in a complete baling system.Standard features include:ANSI Z245.5 Compliant - All compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control PanelsUHMW Ram Shoes - Adjustable to assure straight tracking and readily replaceable, should the need ariseOil Sight Gauge - Oil level at a glanceOil Filter - Replaceable spin-on cartridge to keep your oil cleanHeavy Duty Controls - NEMA 4-rated pushbutton controls with key-lockable start switchAutomatic Single-Cycle Operation --Bale Size: 60" x 30" x 40" -- Bale Weight Up To (OCC) 1400 Lbs --Throughput (OCC) 2.5 bales /Hr -- 7" Cylinder

Katie Lechelt
800-374-5009 ext:452
Call

$

DENS-A-CAN DAC-600 Can DensifierSpecificationsAll DENS-A-CAN Densifiers feature high-quality hydraulic components, advanced manifold construction, and straight-thread O-ring fittings to minimize leakage. The DAC 600 is fully automatic and will run continuously, as long as cans are being fed. It features an automatic shut off when empty.Direct Charge is the processing of cans without the need for any preprocessing like pre-weighing. The DAC 600, like all DENS-A-CAN Densifiers, can be placed directly beneath a surge storage system.Can bridging is eliminated by the use of an agitator. The agitator rotates when the single compression ram is retracting; the rotating agitator breaks bridging and forces the cans into the compression chamber. The DAC 600 is fully assembled and mounted on casters to allow for easy cleanup. After the tank is filled with oil and electricity is run to the machine, it is ready to operate!All service areas of the DAC 600 have ample access. All wear components are bolted and designed for easy replacement.Capacity in pounds/hour: -- Aluminum: 600 --Aluminum Flat: 800 -- Bi-Metal: 1,020 -- Biscuit Description: -- Typical size: 8' x 10' x 11' with integral banding grooves. -- Weight and density of a typical biscuit: -- Aluminum cans- 20/22 lbs. each or 40/43 lbs./cu. ft. typical. -- Bi-Metal cans - 35 lbs. ea or 70 lbs./cu. ft. typical. -- Banded Bundle typical size and weight: 125 Biscuits, 40' x 50' x 55; no skid or pallet needed. -- Aluminum beverage cans: 2,500 Pounds -- Bi-Metal cans: 4,375 Pounds -- 40' Trailer capacity: (18) Bundles. -- Standard Power: 10 HP - 240 V, 3-Phase, 40 Amps -- Approx. weight with conveyor: 2,600 Lbs -- Hydraulic reservoir capacity: 30 Gallons

Katie Lechelt
800-374-5009 ext:452
Call

$ 32,900

ECONOMY BALER - 5042E840F, Auto-Tie Open-End Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 40 HP -- Feed opening: 50" x 42" -- Bale size: 40" x 40" variable -- OCC Bale weight: 1,700 - 2,000 LbsEquipped with: -- Infeed Conveyor -- Open-End

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved