• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
36 Results Found for Strapping Machines Banding Viewing 1 - 20 of 36 results
STANDARD LISTINGS
AMERICAN BALER 3029-720R AUTO-TIE HORIZONTAL BALER -- Motor 20 HP -- 7" Cylinder -- Infeed opening 27.5" x 30" -- Bale size 42" x 30" x variable -- Up to 1,400 lbs. (OCC) -- Ram face pressure 94 psi -- Platen force 115,450 lbs -- WILL BE COMPLETLY REFURBISHED PRIOR SHIPMENT -- 6 MONTHS WARRANTY ON PARTS -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
AMERICAN BALER 5029-HAT-975 AUTO-TIE HORIZONTAL BALER -- Motor 75 HP -- 9" Cylinder with 66" stroke -- Infeed opening 49.5" x 27.5" -- Bale size 30" x 43" x variable -- Bale weight up to 1,400 lbs (OCC) -- Shear blade -- Platen force 190,852 lbs. -- WILL BE REFURBISHED PRIOR SHIPMENT -- 6 MONTHS WARRANTY ON PARTS -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
AMERICAN BALER 60AH36 CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- 7"Cylinder -- Feed opening 28-1/2" x 30" -- Finish bale size 30" x 36" x 60" -- Total ram thrust 69,200 lbs. -- Dimension; 13'8" long X 4'8" width X 7'5" high -- Shipping weight 7,000 lbs.
Equipment Location:SOUTH
Michel Hamel
800-374-5009 ext:472
AMERICAN BALER 7042-AT-975D AUTO-TIE HORIZONTAL BALER -- 75 HP motor -- Feeding opening 70" x 42" -- AUTO-TIE model -- Bale size 42" x 42" x Variable -- 9" Cylinder -- Shear knife -- Loaded on your truck
Equipment Location:SOUTHEAST
Michel Hamel
800-374-5009 ext:472
BALEMASTER EO-720 WIDE MOUTH AUTO-TIE HORIZONTAL BALER -- 10" Cylinder -- Feed chute 60" L x 41-1/2" W -- Finish bale 30" H x 44" W x Variable -- Shear blade -- 4 Wire tie -- Touch screen controls with Allen Bradley PLC -- Used Rough Top conveyor included -- Lower horizontal feed incline conveyor -- Loaded on your truck
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
Balemaster 5275-G-10 Auto Tie Baler with In-Feed Conveyor -- 75 HP motor -- 10" Cylinder -- 5 wire ties -- Open-Top hopper. 84' x 60" -- Feed Opening: 75" x 45" -- 84" wide rubber belt conveyor Marathon -- 3" cleats -- Approximately 35' long + bale Table -- Marathon Bin Dumper -- Stairs -- 13 boxes of wire -- Extra needle inserters and twister hooks, misc. parts and tools including cylinder head wrench -- Cylinder rebuilt 3 months ago ands relined in 2015, very nice baler -- Loaded on your truck's
Equipment Location:WEST COAST
Michel Hamel
800-374-5009 ext:472
BALEMASTER 4275-G8 AUTO-TIE HORIZONTAL BALER -- 75 HP motor -- 8" Cylinder -- Feed opening 34" x 32" -- Single shaft FLUFFER -- Infeed conveyor -- They have replaced the following; -- Hogger bearings and arbor assembly, Oil cooler replaced, Cylinder replaced, Touch Screen replaced, PLC replaced (all in the last 5 years) -- Loaded on your truck
Equipment Location:GREAT PLAINS
Michel Hamel
800-374-5009 ext:472
C & M 5046-AT37 HORIZONTAL AUTO-TIE BALER -- 30 HP motor -- 7" Cylinder -- Hydraulic Auto-Tie System -- Feed opening 50" x 46" -- Bale size 62" x 46" x 40" -- Platen force 96,163 lbs. -- Bale weight OCC 1,400 / 1,600 lbs -- Shear blades -- NO CONVEYOR -- Loaded on your truck
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
C&M 5046-AT88 AUTO-TIE HORIZONTAL BALER -- Twin 50 HP motors -- 8" Cylinder -- Hopper opening 50" x 46" -- 7.5 Sec. cycle time (very fast) -- Platen force 125,000 [email protected] 2500 psi -- Bale size 46" W x 40" H x variable length -- Available immediately -- Loaded on your truck
Equipment Location:SOUTH
Michel Hamel
800-374-5009 ext:472
EXCEL EX60 HORIZONTAL CLOSED DOOR BALER -- 20 HP motor -- Closed door full eject model -- (2) 6' cylinders -- Infeed opening 54" x 35" -- Bale size 60" x 48" x 30" -- Complete with feeding conveyor. -- Ready to go
Equipment Location:PACIFIC NORTHWEST
Michel Hamel
800-374-5009 ext:472
EXCEL MFG EX62 CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- Closed door full eject -- (2) 6" Cylinders -- Infeed opening 54" x 35" -- Bale size 60" x 48" x 30" -- Bale weight 1,200 lbs (OCC) -- Production capacity up to 2.4 TPH OCC -- Shear blade -- System pressure 3,000 psi -- Platen force 159,400 lbs -- Safety interlock door, tongue & groove floor, Hardox 400 wear surfaces -- Will be completely refurbished prior shipment, allow 6 to 8 weeks -- 6 Months warranty on parts. -- Loaded on your truck
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
EXCEL EX62 Horizontal Closed Door Baler -- 20 HP Motor -- Twin 6” Cross-Cylinders -- Standard Hopper Included -- 159,400 lbs. of Total Ram Force -- 60” x 38” x 40” Bale Size -- 46 Second Cycle Time -- Full Bale Eject / Full Platen Pen -- Tongue & Groove Floor -- Shear Blade -- Fob: Indiana -- Loaded on your truck
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
-- HARRIS HRB-8 NON-FERROUS 2 RAM HORIZONTAL BALER -- Completely Reconditioned -- 12" Main Ram Cylinder - 8" Eject Ram Cylinder -- One (1) 100 HP Motor -- 57" x 110" Feed Opening -- US 332 Wire Tier (Rebuilt) -- New Grippers, New Wheels, New Yokes, Repaired Track. Tested with video. -- Air to Oil Cooler -- HMS Quality Reconditioning Included -- New Pump Cartridges (4) -- New AR400 Floor & Wall Liners -- New Knives on Shear Beam and Ram -- New Hold Down Bars -- New Hold Up Bars -- New Seals on Rotary Valves -- Rebuilt Several Valve Shafts and Bearings -- Motor was Megged and Shaft Replaced -- Ensure All Structural and Hydraulic Components are in good condition. -- Automatic & Manual Operation with Original Operators Station – New Panel Cover -- Repacked Cylinders and Pistons -- Cleaned & Painted -- 90 Day Major Parts & Labor Warranty -- Production - OCC (10-12 tons/hour), Non-ferrous (7-15 tons/hour) or Solid Waste (18-23 tons/hour) -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
HARRIS/SELCO HSO-107A20 AUTO-TIE HORIZONTAL BALER -- 20 HP motor -- 7" Main cylinder -- Feed opening 28" x 30" -- Bale size 30" x 36" x Variable -- Only 200 hours -- Like new condition
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
HARRIS/SELCO HSO-1210AR75 AUTO-TIE HORIZONTAL BALER -- 75 HP motor -- 10" Cylinder -- Infeed opening 28" x 49" -- Bale size 30" x 40" x variable -- Bale weight up to 1,800 lbs (OCC) -- Shear blade -- Ram face pressure up to 157 psi -- Platen force up to 188,496 lbs -- INCLUDING CONVEYOR; -- 30" wide X 28'6" long -- Slider Bed Feed Type -- Motor 3 HP -- Overall height of sides 30" -- Height of sides over belt 16" -- Discharge height 14' -- Belt type ROUGH -- WILL BE REFURBISHED PRIOR SHIPMENT -- 6 MONTHS WARRANTY ON PARTS -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
INTERNATIONAL NA-1260 CLOSED DOOR BALER -- 20 HP motor -- 6" Cylinder -- Ram force 57,900 lbs -- Feed opening 30" x 50" -- Shear bar -- Bale size 60" x 30" x 36" -- Loaded on your truck
Equipment Location:MIDWEST
Michel Hamel
800-374-5009 ext:472
IBC TR830 (2) RAM HORIZONTAL BALER -- Auto-tie model -- 30 HP motor -- 8" Main cylinder -- 8' Eject cylinder -- 150,796 lbs total force -- Adjustable shear blade -- Loaded on your truck
Equipment Location:PACIFIC NORTHWEST
Michel Hamel
800-374-5009 ext:472
INTERNATIONAL 1260-B CLOSED DOOR BALER WITH SHREDDER -- Closed door baler model 1260-B -- 20 HP motor -- 6" Cylinder -- Feed opening 28" x 50" -- AMS 7500 INDUSTRIAL PAPER SHREDDER -- 75 HP motor -- Strip cut -- Feed conveyor -- Discharge conveyor -- Loaded on your truck
Equipment Location:SOUTH
Michel Hamel
800-374-5009 ext:472
INTERNATIONAL 1272HD CLOSED DOOR HORIZONTAL BALER -- 30 HP motor -- 7" Cylinder -- Feed opening 28" x 50" -- Loaded on your truck
Equipment Location:GREAT PLAINS
Michel Hamel
800-374-5009 ext:472
IPS CONQUEST AT-12150HS-200S WIDE MOUTH 2 RAM HORIZONTAL BALER -- 12" Main cylinder -- 150HP motors ( 2x 75 HP) -- Hopper opening 72" w x 72"l Expended -- Bale size 43"w x 43"h x Variable -- 50-60% Liner wear left on the floor -- 1,000 lbs Wire spool system -- OCC bales 2,200 + lbs. -- Many spare parts -- Ready to load on your truck
Equipment Location:NORTHEAST
Michel Hamel
800-374-5009 ext:472