Sawmill Equipment For Sale

Band Mills (Wide) (45) Band Mills (Thin Kerf) (72) Debarkers (80) Edger-Boards (65) Forklifts (59) Gang Saws (52) Hogs and Wood Grinders (222) Portable Sawmills (31) Resaws-Band (168) Scragg Mills (36) Trim Saws (78) Unscramblers (31) Wheel Loaders (78) Wood Chippers - Stationary (153)
Air Compressors (157) Airlocks (23) Banding-Strapping Machines (173) Blowers and Fans (139) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (30) Carriage Drives (Sawmill) (58) Chip Bins (17) Chip Cyclones (26) Chip Screens (38) Chipping Canters (3) Chop Saws (63) Circular Saw Husks (7) Circular Sawmills (90) Conveyors (86) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (211) Conveyors General (26) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (46) Conveyors Belts (197) Conveyors-Barn Sweep (22) Conveyors-Live Roll (113) Dip Tanks (6) Drills Single-Multiple (1) Drum Dryers (16) Dry Kilns (46) Dump Hoppers (9) Dust Collection Systems (270) Edger Tailing Devices (5) Edgers-Gang (41) Edgers-Slab (6) Edgers-Vertical (6) Electrical (170) Gang Rip Saws (115) GenSets (40) Hammer Mills (8) Hydraulic Power Packs (94) Knife Grinders (39) Laser Lights (7) Log Home Machinery (15) Log Merchandising Systems (14) Log Turners (Sawmill) (38) Lumber Carts (18) Lumber Sorters (6) Lumber Stackers (24) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (35) Misc (100) Operator Cabs (34) Package Saws (2) Parts and Parts Machines (9) Post and Pole Peelers (22) Power Units-Engines (6) Radial Arm Saws (31) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (110) Shavings Baggers (1) Shavings Mills (23) Slab Saws (10) Stake Pointers (4) Step Feeders (3) Straight Line Rips (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 193
3849 Results Found
Sort By 
Recently Added Items
Corothers
Call For Price
Corothers
Nyle Systems L200M
Call For Price
Nyle Systems L200M
2008 Vecoplan RG 42/60 XL Grinder
Call For Price
2008 Vecoplan RG 42/60 XL Grinder
2018 Vollmer
Call For Price
2018 Vollmer
$ 7,900

AIREWORKS FX-05-2000 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options.Features: -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 2,000 CFM / 7-10 IWG with 16.7:1 air to cloth ratio. Equipped with: -- (5) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 125 Sq. Ft. of cloth filter area and 16.7:1 air to cloth ratio with 40 Gal. of collection capacity. Complete with: -- Direct drive dynamically balanced centrifugal fan assembly with 5 HP TEFC motor, 1,750 RPM, non-sparking Heavy Duty machined & balanced impeller; 11" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

$ 12,600

AIREWORKS FX-10-3500 Modular Dust Collection System. The "FX" Series is a self-contained modular designed unit for interior use that utilizes a dynamically balanced fan.Features: -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 3,500 CFM / 7-10 IWG with 14:1 air to cloth ratio. Equipped with: -- (10) 12" x 8' High-Efficiency filter bags up and (2) plastic collection bag down. -- The filter bags have 250 Sq. Ft. of cloth filter area and 13:1 air-to-cloth ratio with 80 Gal. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, 1.750 RPM -- Non-sparking Heavy Duty machined & balanced impeller; 13" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

$ 15,800

AIREWORKS FX15-5000 Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction,fully welded plenum built using 11 ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

5 HP Mist Collector 460 volt 3 phase

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

 Lenoir, NC
Air Systems Mfg of Lenoir Inc
828-757-3500
Call

$ 2,000

Air-Tek refrigerated air dryer, 400 CFM, 2hp, 460 volts, excellent condition

 Wolcottville, IN
Showcase Equipment
260-250-4645
Call

Call for Price

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

4 saw edger with 3 movable saws and saw auto lube system with PLC joy stick controller. Adjustable for 4-3/4" material hydraulic cylinder saw position station Hydraulic feed through comes with motor and PLC control cabinet. Buy and receive at Richmond EXPO on April 13, 2024..... Hurry people are looking. Let this one be yours. Conveyors with jump up chains available as well. Laser lights will be on this machine at Richmond ONLY.

 Richmond, VA
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

this mighty slab saw is compact and can cut singles and doubles. Saws adjust with the touch of a control. Horizontal set up and each independent arbor holds 2 saws and has its own motor for faster recovery for doubles. Air press roll on infeed with fence Hydraulic side feed roll includes motor controls and PLC controls. 60 HP motor Ready to hook to your 440 Volt power Just need a single slab saw? Look at the Akkuslar HYM 350 Call 931-797-6284

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

HYM 350 Hydraulic Horizontal Slab Reclaim Saw with operator controls (2) 40 HP motors cuts boards as short as 48" X 4-3/4 to 13-3/4 wide X 1/2 to 4-3/4 thick. This might slab saw will produce boards from slabs that would normally go to the chipper. Reclaim and pay for this mighty saw

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

Turn those scrubby logs into profits. This quad scragg will cut 6” to 13.7" logs 5’ to 60’ depending upon design of the machine. log Turner infeed 4 independent arbor saws. Hydraulic Sharp Chain Feed Through..... outfeed with cant feed through and board separation. Quality , performance in every cut Simple handling, operation and maintenance. Also see our Prism 500 processor. Up to 130-200 HP total saw power depending upon application includes mounted MCC and PLC. Deluxe operator console with chair Purchase now and take delivery at Richmond Expo on April 13 2024 Great for making cants and crossties as well as lumber with the 220 Gang or the 160 bull edger behind it. See these at lumbermenonline as well. Call Jackie 931-698-3342

 Richmond, VA
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

This unique combination edger/ multi-gang rip saw has capabilities of edging, splitting boards and even panels. saws can be configured to almost unlimited possibilities. You will not want to miss out on shipping paid to the US. This machine will be in Richmond, VA and ready to load on your truck April 13, 2024, but you must act now! Heavy duty construction https://akkuslarmachine.com/products/. 931-797-6284. or Call Amy 928-723-9449 with super grip chrome feed rolls. Quality and performance with every cut Simple Handling and Operation Easy access for routine checks and maintenance Just Call or text Kittrell Sawmill Brokers 931-797-6284 comes complete with controls and operator controls.

 Richmond, VA
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

This machine is designed for cutting a max height of 4"X 27-1/2 holds up to 6 saws and can be used for a Multi Gang Rip as well.

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

This edger is designed to cut cants and boards with max of 4-1/2 in height There are 3 saws with 2 shifting saws. Hydraulic feed with knurled feed rolls. Indeed top press roll is hydraulic comes with motor & PLC controls and joy stick controllers Call Rachel 931-698-3342

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

This beefy mighty machine is perfect for cross ties and custom timbers, and pallet and lumber cants. Single cut or double cut side boards. Excellent log turner with sharp chain feed through for lengths up to 60' special order. Operators controls Nice tailing device with center press roll section for timbers/ cants and ties. Quality and performance with every cut. Simple operation and maintenance. Call Kittrell Sawmill Brokers 931-698-3342

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

Log head saw cutting system. It is designed to cut logs using your favorite carriage with a diameter range of 6" to 27.3/4" cutting process is provided with maximum precision with two fixed strobe circular saw. That's back and forth on the track. (2) 60 HP motors run 60' per minute. The saw pictured here was a trade in and will be retrofitted at the factory. Call 931-698-3342

 Spring Hill, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

Call for Price

ALJON 580CL Car Logger BalersWith a 10' x 19' chamber and L-box design, it can swallow vehicles as large as full-size vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6' -- Bale size: 40" x 25" x Variable -- Production: (20 - 25) Per hour -- Scrap metal productions: 17 - 20+ Metric tons/hour -- Power Unit: Diesel EngineFeatures: -- L-Box design -- New in 2005; approx. (10,000) hours

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved