• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Router Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
ANDI SELEXX Series "BDT" with ATC and Boring; only 285 hours!4' x 8' Fixed table, moving gantry machine with a single-zone vacuum table. -- Equipped with:(1) 7.5 HP ISO-30 Type ATC spindle, air cooled, ceramic bearings, variable spindle speed from 1,000 - 18,000 RPM; 6-station automatic tool changer and 2 HP 6-spindle vertical drill bank (6 in Y-axis). -- Axis stroke:1,800 mm in X, 2,880 mm in Y, and 200 mm in Z-axis. -- Max. feed rate:50 MPM (1,950 IPM) in X & Y, 10 MPM (328 IPM) in Z-axIs. Equipped with & Features: -- Tool Length Measuring System (Tool Touch-off device). -- SYNTECH controller with network compatible WINDOWS PC based front-end, color monitor, keyboard, mouse. -- Full function hand held pendant, absolute & incremental programming, cutter & tool length compensation, feed rate & spindle speed override, inch/metric operation, and linear/circular & helical interpolation. Complete with: -- 10 HP BECKER Vacuum Pump. Tool holders collets and Light safety fences. -- Maintenance supplies (grease, grease guns), and full manuals & product literature.
Equipment Location:SOUTHEAST
Norm Schust
800-374-5009 ext:445
ANDI STRATOS PRO 5 X 12 with ATC & Boring:5' x 12' Moving gantry, stationary table design in a front-to-back configuration with a double-zone phenolic vacuum plenum; (11) pop-up pins for part location within the table & (3) around the table perimeter for nested base manufacturing. -- Equipped with: (1) 15 HP HSK-63F Type grease lubricated spindle, variable speed from 1,000 - 24,000 RPM, ATC with 10-station tool carousel. - (1) 16-Spindle L-shape vertical drill block with (4) horizontal for X- & Y-axis; 15 HP is achieved at 15,000 RPM. -- All axes: powered by FANUC brushless AC Servo motors. The X-axis is driven by twin synchronous helical rack & pinion drive, and the Y- & Z-axis by precision ground ball screws with anti-lash ball nuts. All axes ride on STAR linear guides & recirculating linear roller bearing's for rapid feed rates up to 3,150 IPM on the X-axis, 2,362 IPM on the Y-axis and 1,181 IPM on Z-axis. -- Motion components:Are serviced by an automatic lubrication system. Router spindle features an automatic damper dust collection shroud. -- Control:ANDI - FANUC "0i" CNC PC front system with PC & PLC control; color monitor, large hard disk for program storage, RS-232 interface. -- Features:Linear, circular & helical interpolation, automatic acceleration & deceleration, fast corner function, hand held teach pendant, absolute & incremental programming, feed rate and spindle speed manual override. -- Includes:(1) 25 HP "BECKER" Vacuum pump, assortment of HSK-63 tool holders, assorted collets, and documentation.
Equipment Location:PACIFIC NORTHWEST
Norm Schust
800-374-5009 ext:445
ANDI STRATOS SUP 5 X 10 CNC Router with ATC & Boring with only 473 hours:61" x 120" Vacuum table w/Phenolic resin top; axis stroke: X-axis is 120", Y-axis is 61" and Z-axis is 8"; fixed table - moving gantry. -- Equipped with:(1) 10 HP Router with oil mist lubrication, infinitely variable 1,000 - 18,000 RPM spindle speed, controlled by 13 KVA inverter; 8-position carousel type automatic tool changer with "ISO-30" tool holders. -- Boring unit:(1) (11) spindle boaring block with (9) vertical and (2) horizontal. -- All axes:Move on profile way bearing systems and are driven by precision ball screws with anti-backlash ball nuts for rapid feed-rates up to 945 IPM on the X- & Y-axis, 236 IPM on Z-axis. -- Control:FANUC "21i-mb" CNC Controller with: 9" CRT Screen display, RS-232 interface in separate free-standing control console. -- Controller features:Linear, circular & helical interpolation; automatic acceleration & deceleration, absolute & incremental programming, feed rate override. -- Complete with:Assorted tool holders and original documentation. Note: There is no vacuum pump included.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
Comes with lots of extra parts, also comes with extra refurbished head which cost $8,000 to refurbish, or call and make an offer.
Equipment Location:Woonsocket, SD
605-350-4272