Air Compressors For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 5
93 Results Found
Sort By 
$ 3,880

MATTEI MNC 0110 Refrigerated Air Dryer (110 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 1" NPRT-F Connection.

Jim Reedy
800-374-5009 ext:455
Call

$ 35,971

MATTEI ERC 1030L, 40 HP Rotary Vane Compressor (154 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 40 HP ODP motor; 154 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 25,555

MATTEI ERC 1018L, 25 HP Rotary Vane Compressor (105 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design with 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends; rotor stator unit (RSU) is the rotor which is simply supported by (2) white metal Babbitt bushings that routinely deliver > 100,000 Hours of life. -- 25 HP ODP Motor; 105 CFM @ 125 PSIG; air cooled aftercooler with 18° F approach temperature'; 3-stage oil separator produces 3 PPM in compressed air, automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling, and lubrication. -- An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation; automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 13,176

MATTEI ERC 507L 10 HP Rotary Vane Compressor (43 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 77 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 10 HP ODP motor; 43 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 14,164

MATTEI BLADE 4 LX-TM-SE, 5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (20.4 CFM @ 115 PSIG). RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 5 HP TEFC motor, 20.4 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 15,353

MATTEI BLADE 5 LX-TM-SE, 7.5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (31.8 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bush on the back and now an oversized radial ball bearing on the front to address the side load created by the belts.MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 7.5 HP TEFC motor, 31.8 CFM @ 115 PSIG; full-voltage motor starter, air-cooled After Cooler. -- MAESTRO XB Controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 16,554

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$

Sullivan Palatek 100HP Air Compressor 230 Volt 3 Phase

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

Quincy 75HP Screw Compressor Serial# 940351

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$

100hp Quincy Northwest QNW-V-100-F rotary screw air compressor Rogers 500 CFM air compressor Model: QNW-V-100-F Both compressors are photographed in the photo gallery Serial #1-- 060116 and #2-- 060117 Air end: model FSS204102, serial# NA064325, P/N 144220-001 Date: 4/25/2006 Motor: Toshiba 100hp, 460 volts, Two identical compressors are available Prior use was inside of a building Contact us for price and a freight rate. Can provide test run video

 Toledo, WA
Machinery Scene
360-864-2800
Call

$ 6,500

Quincy 25HP Air Compressors Priced For Both Units 25 HP Screw Compressors Two Identical Units One Main Unit One Back Up

Keith Comeau
704-929-9122
Call

$

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 32,500

QUINCY QGV-50 Variable Speed Rotary Screw CompressorSpecifications: -- 242 Max. SCFM @ 125 PSI; 150 PSI max.; 50 HP motor type direct drive air end. -- Compressor dimensions approx 67” x 38” x 66”; 2,277 Lbs. -- Equipped with: -- Integrated frequency drive; sound enclosure; electronic self diagnostic control. -- Includes: -- QUINCY QPNC354(E11) Refrigerant Air Dryer, 460 volts, 203 max. PSIG; refrigerant type R410A; 400 Gal tank. (3,500) Total operating hours.

Jim Reedy
800-374-5009 ext:455
Call

$ 5,500

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 100 hp electric power, 69,848 hrs, good working condition

 Wolcottville, IN
Showcase Equipment
260-250-4645
Call

$ 8,550

SAMUEL ANK-660V-150PSI 660 Gallon Air Receiver660 Gallon Vertical Air Receiver Tank. • Diameter O.D./I.D.: 42 O.D. • MAWP: 150 PSI @ 400° F • MDMT: -20°F @ 150 PSI • Capacity: 660 Gallons • Pressure: 150Support & Attachments: • 8 Base Ring • Safety Valve & Pressure Gauge - 700/MCTK-SW10-150Recommended Option: Zero Loss Compressed Air Condensate Trap w/WindowPowers through Condensate buildup and Ideal for Compressor applications up to 100 HP (500 SCFM).Ideal for inline filters up to 5000 SCFM. • The WaterHog™ design avoids small passages common on competitor designs, ensuring clog-free operation. • Fully Automatic Operations. No timer or manual settings • No Electrical Connections. WaterHog™ is powered by compressed air, avoiding the need for electrical wiring and connections. • Energy Saving Operation. Zero compressed air loss when properly installed with balance line. • Check with your utility to see if it qualifies for energy efficiency incentives. • WaterHog™ pays for itself when replacing open condensate drain valves or timer traps. • Low Profile. • The 4.7" vertical operating height allows WaterHog™ to fit where other larger units can't. • Max Operating Pressure: 200 psig • Min/Max Control Pressure: 40/130 psig • Min/Max Temperature: 34/170 F • Inlet / Outlet Connections: 1/2 inchPrice ...$ 450.00 (2) Year Warranty Included

Jim Reedy
800-374-5009 ext:455
Call

$ 3,500

SAYLOR-BEALL 705 Reciprocating CompressorSpecifications: -- 5 HP Motor, 17.3 CFM @ 175 PSI and 22 CFM @ 100 PSI; splash lubricated 2-stage cast iron pump. -- Equipped with: -- 80-Gal. horizontal tank w/manual tank drain, automatic start/stop operation; oil level site glass, and pressure gauge. -- Features: -- Pump with deep finned cylinder heads for cooling, large diameter air filter/silencer & OSHA approved belt guard; durable painted finish for years of service under hard conditions. -- Includes: -- Service & operators manual.

Jim Reedy
800-374-5009 ext:455
Call

$ 650

SPEEDAIRE 4B228D Portable CompressorSpecifications: -- 6 HP Reciprocating Air Compressor; Pump # 4B247A; 10.3 SCFM @ 90 PSI; 9.1 SCFM @ 135 PSI. -- Max. pressure rating: 135 PSI; 26 gallon horizontal air receiver on (2) wheels; motor and flywheel guard. 6 HP motor, wired for single phase, 240 Volts, 15 Amp. -- Complete with: -- Single-stage compressor head; air pressure regulator gauge and tank pressure gauge; start-stop auto or manual cycle controls; pressure relief valve. -- (1) air discharge port with quick disconnect.

Jim Reedy
800-374-5009 ext:455
Call

$ 1,350

120 Gal. Vertical Air Receiver Tank. -- ASME / NB code for 200 PSIG max. working pressure. -- Equipped with 1/2" safety relief valve (#141478), pressure gauge (#P-500) and manual drain with fittings for installation (shipped loose). -- Primed exterior; approx. weight 260 Lbs.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved