260-250-4645
Equipment for Sale? We Buy and Sell for YOU! From just one piece to complete operations, we can pay cash or do an auction for you. We strive to seek the seller’s best interest from selling one piece to a complete liquidation – WE SERVE YOU! Need Equipment? We sell LIKE NEW to well used equipment, and find equipment to fit your NEEDS! Call Us - We’d like to hear from you!
617 Results Found
260-250-4645
$20,000
2 - S A Woods 4 Head Moulders with automatic feeders on both and many upgrades. Original owner and comes with all tooling and extra parts. 1 Moulder is manufactured in 1939 with original blue prints and parts books. The other Moulder is a 1960s model. Both machines were pulled out of service 2 years ago. Both moulder are in working order. There are 20 + heads available and 3 pallets of parts go with the machines. They have been kept indoors. Make an offer! Call 800-459-2148 for more info.
$17,500
Complete Operation For Sale: - S. A. Woods Moulder 4 x 8. - Includes all switch gear, large blower and piping, many heads, knives, sharpening equipment. - Cap 150 BF 2 x 6 per minute. - Drop channel siding and tongue and groove set ups. - 2 Top heads, 2 Side heads, 1 Bottom head. - 550 volt, 3 phase. Call 800-459-2148 for more info.
Sajo Milling Machine All Electric. Made in Sweden Call 800-459-2148 for more info.
$17,250
6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition
$32,500
6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition
$2,500
1984 Sanborn Min Max Wide Band Sawmill with Live Deck. Detroit 271 engine with the largest injectors that are made for that engine. It starts and runs well. Maintenance and Repairs Done: - balanced both wheels, reground both wheels - removed some weight from the upper wheel - added a weight strain system instead of a small spring - added vibration damping connections - provided electric shut off and throttle to the engine - added an auxiliary open center hydraulic pump and valves. The pump is driven off the front of the crankshaft of the engine - replaced the bearings throughout the mill - strengthened the take away table to take very heavy loads - installed a new set work screw system - removed the pantograph for hydraulic supply and replaced it with an igus hose and cable carrying chain Includes: - hydraulic drive 3 chain live deck that is about 16' long and 12' wide with a stop and loader and arms that go across the bed of the mill. The logs must be rolled across the arms to the 4 head blocks. The frame of the live deck is mounted on 3x3x3 concrete cubes. - set of 4 large head blocks with the same design as the original but which are about 12" large capacity than the originals. - 40 foot long 3 chain green chain with new hydraulic motor and large gear reduction unit - 3 saw Chase 24+" edger with a 271 power unit that starts and runs well. - 7 bands here and another 5 being repaired. Call 800-459-2148 for more info.
2000 Sanborn Min Max This is not a whole mill. - Two complete good working Silvatech Set works , - Four Heavy Duty Head Blocks . Board Dogs, Cant Dogs, Turners and Tapers all Hydraulic. These were custom built super heavy duty for this mill . Very well cared for. Great care taken in the removal. - Every thing is under cover. - It’s the complete system with everything you need to put it back together, all labeled and photos. - The spare set works was near new when bought. - Everything is on heavy duty pallets can be shipped. Call 800-459-2148 for more info.
$17,250
6"x42" wide overall, includes infeed and outfeed rollers, working condition
$200
Electric Motor with 20 HP induction - $200.00 Electric Motor with 15 HP induction - $200.00 3 Phase 575 volt, 1720 RPM
$7,000
Smith single head resaw, lineshaft ready, return belt, good working condition
30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and controls included, recently in production and in good working condition, infeed/ outfeed also available, call for price
2009 Soderhamn Ericksson Cambio 71-45 AIR-TEN - CAMBIO 71-45 AIR-TEN DEBARKER - SECOND HAND - Debarker for logs. For clean and gentle debarking. - Technical data Rotor opening: 450 mm - Min. log diameter: 65 mm - Min. log length: 2.5 m - Rotor speed and feed speed: 410 rpm, 75 m/min - Feedwork motor: 7.8/5.7 kW at 1460/985 rpm - Rotor motor: 37 kW at 1470 rpm - Weight net: 3,150 kg - Dynamic load: 48,000N. Call 800-459-2148 for more info.
Strick Manufacturing Trailer - Sawdust or Wood Chip Trailer - Dayton Style Wheels - 38' Trailer - Needs Work Call 800-459-2148 for more info.
Sullair air dryer, 500CFM, 3 phase, 460 volts, refrigerant type, excellent condition
$1,280
Supreme Mfg lumber carts, 42" wide x 92" long, heavy duty casters, 4 stake pockets, includes 2 stakes, BRAND NEW!!
3 strand 10' wide x 30' long green chain, Tulsa Winch drive, C-55 rooftop chain, heavy duty built, BRAND NEW IN STOCK AND READY TO SHIP
$10,750
Supreme Mfg rollcase 20" wide x 20' long, 6" dia rolls, 1 7/16" dia shafts, electric drive, BRAND NEW!!
Teco Induction Motor, Type AEVFACLQ9 Frame, 160 M 20 HP RPM 3520 Volts 230/460 3 Phase. This electric motorwas taken NEW off a LeaderMac 523 SpeedMac. There are 2 of these. Call 800-459-2148 for more info.