Sawmill Exchange
Sawmill Exchange
 800-459-2148
 713-729-6455

Sawmill Exchange specializes in brokerage of small mills. Thin kerf, circle, scragg and more - when you need a small mill call Sawmill Exchange FIRST!

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 12
230 Results Found
Sort By 
Sawmill-Exchange
 800-459-2148
 713-729-6455
Little Chiper 27-5  Wood Chipper - Stationary
$8,000

REDUCED TO SELL! $8000. Little Chipper 27-5. 7" wide x 2 1/2" H in feed opening. 10' in feed conveyor belt. Designed to chip scraps from table or rip saws into sawdust. Has hydraulic motor. Like new condition.

 713-729-6455

 Call
2008 LogMaster LM-2  Band Mill Thin Kerf
$25,000

2008 Logmaster LM2 - Custom Built with one owner - 30 HP Kohler Gasoline Engine - Fully Hydraulic - Cap 12' x 28" - 19’1” (229-inch) Band saw Blade –One inch width - Ten gallon fuel tank - Always received regular maintenance

 713-729-6455

 Call
2017 Lucas Mill 8-30  Circular Sawmill
$16,000

2017 Lucas 8-30 - Kohler 30 HP gas engine with 60 hours - Slabbing attachment - Planing attachment

 New York, Ne
 713-729-6455

 Call
Lucas Mill 6-18  Circular Sawmill
$16,000

Lucas 6-18 Sawmill - Just like new with only about 2 hours - 18 HP Vanguard V-twin engine, with electric & manual start - Cap 20' x 6" on a single cut and 12” on a second cut. - Easy to assemble and transport. - Cuts true and fast - Comes three extra blades, tool kit, and all documentation and introduction DVD

 713-729-6455

 Call
Manitowoc CHAIN FLAIL DEBARKER  Debarker
$80,000

Manitowoc Flail Debarker Qty: 2

 713-729-6455

 Call
Marathon  Electrical
$3,250

Location: Wisconsin Marathon Electric Frame 44ST Electric Motor. 100 HP, 890 RPM, 460 volt AC, high efficiency, new surplus motor. Call 800-459-2148 for more info

 713-729-6455

 Call
1983 Mattison 404  Gang Rip Saw
$4,500

1983 Mattison Straight Line Rip Saw - single blade, model 404. 3 ph electric with 15 HP motor. 2 HP feed motor with 2 feed speeds of 50 and 100 FPM. Cap 4" thickness.

 713-729-6455

 Call
Mattison 202  Gang Rip Saw
$3,800

Mattison 202 Straight Line Ripsaw. 220 V, 3 phase. Good condition.

 713-729-6455

 Call
McDonough  Band Mill Thin Kerf
$2,700

1949 McDonough Manufacturing McDonough 54" Vertical Bandsaw. Model McDonough 54" Vertical Bandsaw.

 713-729-6455

 Call
Meadows Mills  Circular Sawmill
$6,000

Meadows circular sawmill on wooden husk abour 20' long. 3 headblocks. 56" blade. No power.

 713-729-6455

 Call
2002 Meadows Mills #2  Circular Sawmill
$50,000

Meadows #2 Right Hand Circular Sawmill approx 22 years old. 300 gallon fuel tank. John Deere 6 cyl engine with 170 HP, has pony motor, turbo and is skid mounted. 56" blade with carbide teeth. 4 head blocks. Cap 16' x 26". Meadows edger with 3 blades with carbide tips. Cap 36" x 3.5". Isuzu 30 HP engine. Will sell Meadows, John Deere, Edger with or without motor separately.

 713-729-6455

 Call
Meadows Mills #1  Circular Sawmill
$10,500

Meadows #1 Automatic Circular Sawmill - Automatic Set Works - Hydraulic Log Turner - 4 Head Block Carriage - No Power - Ready to load

 713-729-6455

 Call
1986 Meadows Mills #1  Circular Sawmill
$56,000

Meadows Circular Sawmill Model #1 - Refurbished Mill - New Factory Built saw Arbor and Bearings from Meadows - New Factory Built Live Feed Conveyor - Computer Setworks - Capacity of 1,000,000 + BF per year - 225 HP Detroit Diesel - 56" Blade with new bits and shanks - Have Most of the factory built parts - Some Hydraulic Hoses need to be Changed - Primarily made crossties when in operation

 713-729-6455

 Call
Meadows Mills HEAD SAW  Circular Sawmill
$22,000

Meadows head saw with 4 head block carriage , computerized setworks, Corley cab, hydraulics and electric headsaw motor + 10 HP power pack $22,000 Delivered to your location.

 713-729-6455

 Call
Mellott  Conveyor
$27,500

Mellott Manufacturing Conveyor System - Three (3) 8” x 30” x 14’ long live roller - One (1) 8” x 30” x 18’ long live roller - One (1) 8” x 30” x 18’ long live roller with 10’ Spiral discharge rollers - Two (2) 8’ x 15’ 3 strand transfer deck - One (1) 6’ x 10’ 3 strand transfer deck Sold as a lot or in individual pieces.

 713-729-6455

 Call
Mellott  Conveyors-Live Roll
$5,500

Mellot Live Deck - 4 strand. 20' long X 15'5" wide. Has kickers for cants. Powered by hydraulic pump.

 713-729-6455

 Call
Minn LEFT HAND SET  Circular Sawmill
$12,000

Left Hand Set Circular Sawmill with 52 F style blade, 40' track, blower and 3208 CAT engine. Good condition.

 713-729-6455

 Call
Mobile Dimension  Circular Sawmill
$33,000

Mobile Dimension Circular Sawmill. 30' with 6' endstands. 25 HP vertical and 15 HP horizontal 3 phase. Still set up. This mill will produce 6 mbm in 6x6 program.

 713-729-6455

 Call
Moons ASM-1  Sharpening Equipment
$3,500

Moon's Band Sharpener and Setter Combo, Model ASM -1. Service blades 1/2" to 2" wide. Tooth spacing 1/16" to 1". Also circular blades up to 20" diameter. Good Condition.

 713-729-6455

 Call
1999 Morbark ROSSERHEAD DEBARKER 642/648  Debarker
$18,000

Rosserhead Debarker Model 642/648 Good condition. Runs well. Original safety manual included.

 713-729-6455

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved