336-269-2284
WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.
87 Results Found
336-269-2284
21' MEADOWS, green collecting chain, floored, 78 roof-top chain, 3' centers, 2 HP drive. $5,500.00
28' Sorting chain conveyor, 4'centers, 81X chain, electric drive. Price $5,500.00
$125,000
Used, 2016 MEBOR horizontal band saw. Model 1200 (48" diameter), 6" wide saw blade. 75 HP drive; used to cut lumber 3 years max; cuts 16' long logs, and has rail to extend to 24'. Electronic set works. Includes: MEBOR 16' log deck, 4 strands, with stop/loader, and MEBOR saw sharpener, Model BA. Will require factory trained start-up technician. Located in warehouse in Biscoe, NC
Must be ordered. MEBOR 19 degree tilted 56" vertical band mill with electric motor drive, 8" wide blade, movable guard. Carriage is a 48" hydraulic linear 4 head block with: 3, chain, on board, log turners; Servo, integral carriage drive; heavy duty common frame with rail; Operator’s control cab with Servo electronic controls. F.O.B. Slovenian factory. Call for pricing & delivery (6 months to Port 3/27/21) (336)269-2284.
Call for Price
MUST BE ORDERED. NEW MEBOR horizontal band saw Model HTZ 1200 PLUS to saw up to 48" diameter x 21' long logs x 34' OAL x 26,000 lbs. Includes: 60 HP motor driving 48" cast steel wheels; 2 log turners; 4 hydraulic log clamps; 4 driven hydraulic rollers; 15 HP heavy duty hydraulic system; automatic off-bearing belt; automatic slab/board drag back; double cut; 6" or 7" blade; easy controllable, high end electronic setworks. F.O.B. SLOVENIAN FACTORY. CALL BUTCH AT 336-269-2284 for pricing & delivery (9 months to Slovenian Port 11-24-22).
Call for Price
MUST BE ORDERED. NEW MEBOR Debarker Model SLH-1200 with butt-end reducing unit. Maximum log diameter 50" x 16' logs x 30,000 lbs. Includes: 6 sets of heavy duty log rotation wheels-variable speed; variable speed debarking feed; log kickers; 40" long butt reducing head with knives and powered by 30 HP electric motor; automatic remote control of machine; longitudinal log rollers for positioning log on the carriage to work with butt-reducing head; 3 strand log deck with stop and loader; 2 heavy duty box frames to receive debarked logs. MACHINERY IS F.O.B.SLOVENIAN FACTORY. Call for current pricing & delivery (6 month delivery to Port 3/27/21). (336) 269-2284.
58? MORBARK 3 knife chipper; horizonal feed-top discharge; box-type fan blades; fair to good condition. Machine has been patched but well done. Chipper sheave and blow pipe included. PRICE: $8,200. OBO
$28,900
NEWMAN Trimmer System. Model KNO 24. Will trim 8' to 16' with adjustable '0' saw. Trimmer includes 7.5 HP motors on each saw with aluminum wheel hold downs; saw blades; chain type waste conveyor in trimmer; electric variable speed feed chains. System includes: 5 strand lumber deck with 81X chain by 13' long with lumber stops; 4 strand tipple to discharge boards when raised; 6' x 5 strand board dealer with 5 dealer wheels to feed boards to trimmer; 25' long x 30" wide lumber belt under tipple; 30' x 24" waste belt from trimmer waste chain. NOTE: Equipment loaded on your truck and located in Biscoe, NC. Price $28,900.00. OBO
PHILADELPHIA gear reducer: 40:1 ratio; 6 HP. Price $800.00. As-is/where-is. (Inv. # G-13).
48" PRECISION chipper; horizonal feed/top discharge; 6 knife; price includes 10 groove 24" sheave with bushing and square to round transition. No welds on machine. (motors available for additional charge). Offered as-is/where-is, as removed from service. No warranties or guaranties. Price $10,500.
$23,000
Heavy duty PRECISION rosser head type debarker model 848H with 7 sets of bull wheels, overall length approximately 45’, operator’s cab with controls, 4 7/16” bull wheel shafts, head included but not mounted on machine, heavy duty model with 12” I-beam frame and includes barn sweep in the bottom of the debarker. Hydraulic system and bull wheel drive is powered by a 25HP electric motor. Price as is/where is with no warranties or guaranties……Price $23,000.00 OBO. As is where is $23,000.
PROGRESS 60", 6 knife chipper, Serial # 1152, horizontal feed, bottom discharge, fair to good condition (top hood has welded places). As-is $9,400 OBO.
Call for Price
TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.
$800
RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).
$900
RELIANCE gear reducer: 40:1 ratio; 5 HP. Price $900.00. As-is/where-is. (Inv. # G-12).
$27,000
SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.
$7,000
SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door. Offered as-is/where-is, as removed from service. No warranties or guaranties. Price $7,000.
$35,000
8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only. Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls. 3 7/16", double keyed, saw mandrel. Hydraulic feed. Saw shifting device outside of frame but no saws or collars but with shifting arms. 3 sets rubber cushions on press rolls. All sprockets are new with hydraulic drive. No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring. New bearings on feed rolls. 20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00
$12,000
36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00
$90,000
Like new 36" vertical linebar resaw. COMPLETE WITH RUN AROUND SYSTEM. Saws 14"W x 16"H x 12'L cants (can be extended). Operator's cab w/ controls. Elec. sys. w/ starters, prewired mach. Pre-plumbed hyd. sys. 20HP hpu, sub-steel, ten saws incl. Mach. disassembled. Crane additional. $90,000. OBO