MACHINERY INSTALLATION CO., INC.  (M.I.C.I.)
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
 336-269-2284

WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 5
87 Results Found
Sort By 
MACHINERY-INSTALLATION-CO-INC-(MICI)
 336-269-2284
SEW Eurodrive  Electrical
$1,200

SEW gear reducer: 130:1 ratio; 10 HP. Price $1,200.00. As-is/where-is. (Inv. # G-9).

 Burlington, NC
 336-269-2284

 Call
SEW Eurodrive  Electrical
$1,200

SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).

 Burlington, NC
 336-269-2284

 Call
SEW Eurodrive  Electrical
$900

SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).

 Burlington, NC
 336-269-2284

 Call
Soderhamn 48.11  Wood Chipper - Stationary
$8,000

48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.

 Burlington, NC
 336-269-2284

 Call
Soderhamn 5 x 5  Chip Screen
$2,400

SODERHAMN 5' X 5' rotary screen with drive and screen plates. Offered as-is-/ where-is but loaded on your truck.

 Burlington, NC
 336-269-2284

 Call
Toshiba Motors  Electrical
Call for Price

ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).

 Burlington, NC
 336-269-2284

 Call
Tyrone-Berry SMA230  Carriage Drive (Sawmill)
$4,500

TYRONE-BERRY carriage feed, Model SMA 230, with 75 HP electric motor and drum package. Offered as/is where/is. Price $4,500.00

 Burlington, NC
 336-269-2284

 Call
Tyrone-Berry 230  Carriage Drive (Sawmill)
$7,500

TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.

 Burlington, NC
 336-269-2284

 Call
Ukiah 8 X 66  Gang Saw
$26,500

UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6"  x  12'6"; no infeed or outfeed or main electric motors.  $26,500 OBO.

 Burlington, NC
 336-269-2284

 Call
Ukiah 8 X 66  Gang Saw
$26,500

UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6"  x  12'6"; no infeed or outfeed or main electric motors.  $26,500 OBO.

 Burlington, NC
 336-269-2284

 Call
Unknown BOARD DEALER  Trim Saw
$6,000

Board Dealer; 6 strand of 81X chain x 6' long; 6 hard surface tires for loading lumber; 6 primary lumber stops; 2 sets of secondary lumber stops.

 Burlington, NC
 336-269-2284

 Call
Unknown 46  Conveyors Belt
$6,000

46" Wide stick belt conveyor x 10' long. Belt has raised lugs for stick separation. Electric drive.

 Burlington, NC
 336-269-2284

 Call
Unknown  Conveyor Deck (Log Lumber)
$6,000

Inclined lumber conveyor X 12' long; 6 strands of 81X chain with lugs, floored between strands.

 Burlington, NC
 336-269-2284

 Call
Unknown  Conveyor
$2,800

140' of  used, heavy duty, #480 drag chain with wings.  Rusty, but in real good condition--has been stored outside.  8" Pitch, ultimate strength 102,000 lbs., side bar height 2", overall width 14.5". Chain is in baskets. To be picked up in Biscoe, NC. Chain sold as is /where is. Price $20.00 per foot or $2,800.00 for all the chain.

 Burlington, NC
 336-269-2284

 Call
Unknown 18  Conveyors Belt
$6,000

2 PLANER mill belts approximately 12' long x 18" wide belts: variable speed drives. One has adjustable legs. Heavy frames and in very good condition. As-is/where-is loaded on your truck.

 Burlington, NC
 336-269-2284

 Call
Unknown W12  Misc
$1,942

Unused steel. 14 pieces of 12" wide flange steel beam at 74lbs/foot. Actually measures 12 1/4 ” x 12 3/16". Slight surface rust but unused. $ .75 per lb. or $1,942.50 each beam.

 Burlington, NC
 336-269-2284

 Call
US Motors  Electrical
$500

US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).

 Burlington, NC
 336-269-2284

 Call
2001 USNR CANTER-SAWING LINE  Chipping Canter
$265,000

USNR Canter-Sawing Line consisting of: 60' double length infeed section; 10' log rotation section; (ASM sharp chain--NO longer available); 40' infeed section; 6' chipping canter section with 200 HP motors; 7'60" twin band sections with 150 HP motor; 25' outfeed with board off loading; 20' off-feed belt. Price includes removal cost (ready to load); all hydraulic power systems; all Square D motor control centers; Sub-operator's cab with controls included. 2001 model, only operated until 2007. Loaded onto your trucks $245,000 OBO.

 Burlington, NC
 336-269-2284

 Call
1996 Valley 9 x 54  Edger-Gang
Call for Price

9" x 54" wide. Center section ONLY. Clam shell design. 5" diameter spline. Three infeed & five outfeed rolls. Two speed "step" feed rolls. PAC-HOE guide system with 2" guides & THOMPSON guide grinder. (No hydraulic power unit). Two (2) 150 HP motors are included. As-is or can rebuild.

 Burlington, NC
 336-269-2284

 Call
2012 WEG  Electrical
$8,500

250HP, 460VOLT, 1800RPM, EITHER 447T or 445T FRAME, TEFC, INVERTER DUTY, PREMIUM ENERGY EFFICIENT. This motor never ran on the equipment that it was mounded too.

 Burlington, NC
 336-269-2284

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved