Carolina Used Machinery
Carolina Used Machinery
 704-929-9122
 828-773-2204

At Carolina Used Machinery we have only one goal, to offer our customers the very best selection, price and service on their used equipment transactions.

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 3
54 Results Found
Sort By 
Carolina-Used-Machinery
 704-929-9122
 828-773-2204
Twin City Blower  Blower and Fan
$7,000

Twin City Fan Blower Air Lock Can BE Added For Additional Cost

 828-773-2204

 Call
Unknown 60in  Chop Saw
Call for Price

MLS Number 10908606 60 Inch Cut Off Saw 50 HP 575V motor Additional information and pricing to come

 British Columbia, AB
 828-773-2204

 Call
Unknown Push  Misc
$5,000

Stock No. 9509552 PF Push Saw Cutter with Conveyor

 828-773-2204

 Call
Unknown Double End  Trim Saw
$3,900

Double End Trim Saw Manual Set

 828-773-2204

 Call
2013 Vermeer HG6000  Hogs and Wood Grinders
$245,000

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

 828-773-2204

 Call
2023 Weinig Powermat 700  Moulder
$54,900

2023 Weinig Powermat 7000 Bought new $120k 460V

 828-773-2204

 Call
Weinig U22N  Moulder
$23,995

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

 828-773-2204

 Call
West Salem WSM5472  Hogs and Wood Grinders
$250,000

MLS Number 12321010 WEST SALEM WSM5472 Horizontal Grinder -60” Millpower Shaker conveyor/finger screen – deck removed, used to meter flow of material fed by operator and reduce bed depth to make cross belt and head pulley magnets most efficient. -60” Eriez cross belt electro magnet. -Eriez 10K42 kW Silicon Rectifier incorporating: To convert 480 volt, 60 Hz, 3 phase AC to230 volt DC 10,000 watts output Normal convection cooled, full wave bridge circuit Fused AC switch Nema 3r Enclosure -Eries beefy magnet stand to support magnet and chain fall. -60” x 28’6” Slider Bed (Heavy Duty Feeder Type Conveyor) with 8’ section of stainless steel non-magnetic for Eriez cross belt magnet to perform at peak -20”x60” Dodge magnetic head pulley – installed to double up on magnets on conveyor, prior to material entering WSM grinder drag chain feed. Downstream from this is the WSM 5472bh Titan horizontal grinder. Schematics and wiring diagram can be supplied as well. WSM also supplied the chip discharge conveyor and magnetic head pulley and electrical panel with touch screen (by Emerson). Price includes dismantling and loading on buyer's truck. Manuals available for components.

 828-773-2204

 Call
Whirlwind 212  Chop Saw
$2,995

Whirlwind 212 And Others Various Brands And Sizes 8 To Choose From No Feed Tables

 Blowing Rock, NC
 828-773-2204

 Call
Whitney S-97  Planer
$40,000

MLS Number 11180323 Whitney Model 97 Planer 36 inch width capacity by 7 inch thickness 40 HP 3600 rpm top head motor 30 HP 3600 rpm bottom head motor 5 HP feed motor -variable speed 6 row Newman Quite-cut carbide knife heads 432 new carbide knives installed and ground 8 roll feed set-up Knife grinder and jointer Top head dust hood 480 volt, 3 phase electrical Serial no. 15819 Cleaned and checked

 828-773-2204

 Call

Call for Price

Whitney S970  Planer
Call for Price

MLS Number 11570230 Whitney S970 Wood Planer A. 30 inch width by 7 inch thickness capacity B. 40 HP 3600 RPM top head motor , 3 phase ( Approx 50 amps on 480 volts ) C. 30 HP 3600 RPM bottom head motor, 3 phase ( Approx. 40 amps on 480 volts ) D. 5 HP feed motor ( Approx. 7.5 amps on 480 volts ) E. 50 to 150 FPM feed speeds F. ¾ HP raise-lower motor G. Newman 4 row Quite-cut carbide knife ( 5 inch cutting circle ) cutter-heads H. Knife grinder and jointing device I. Dust hoods J. Cleaned and checked K. Repaired Frame L. Serial No. 18343 ( Orig. Mfg. Approx. 1975 )

 828-773-2204

 Call

Call for Price

Whitney S970  Planer
Call for Price

MLS Number 11570232 Whitney S970 Wood Planer A. 30 inch width by 7 inch thickness capacity B. 40 HP 3600 RPM top head motor , 3 phase ( Approx 50 amps on 480 volts ) C. 30 HP 3600 RPM bottom head motor, 3 phase ( Approx. 40 amps on 480 volts ) D. 5 HP feed motor ( Approx. 7.5 amps on 480 volts ) E. 50 to 150 FPM feed speeds F. ¾ HP raise-lower motor G. Newman 6 row Quite-cut carbide knife ( 5 inch cutting circle ) cutter-heads H. Knife grinder and jointing device I. Dust hoods J. Cleaned and checked K. Repaired Frame L. Serial No. 17977 ( Orig. Mfg. Approx. 1971 ) M. Electrical controls in separate cabinet

 828-773-2204

 Call
Williams Pulverizer 200 HP  Hogs and Wood Grinders
$17,000

MLS Number 10791295 Williams Horizontal Wood Hog 200 HP 24" wide 16 Ft vibrating conveyor With soft start

 828-773-2204

 Call
Wisconsin Automated Machine C-450  Tennoner
Call for Price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

 828-773-2204

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved