#110 • 2018 Cleereman 3HB Carriage (1st of an entirety) SN: 38-1078-16, Model: 38, 110V over air controls, 7'6" x 14' overall dimensions, wheels 54" center to center, pantograph arms, Brownsville turners, track oiler

#200 • Cornell Single Arbor Edger-Gangsaw Model: E760, SN: E760-0016-97, 2 moving saws, 60" wide infeed, edger 28" wide, gangsaw 28" wide, 3 1/2" collars, 2" collars, 1 1/2" collars, 1 1/4" collars, side press roll on gang side, control box, no power, 6" x 16' tailing belt on edger side, 27" x 16' tailing belt on gang side

#115 • Helle 3 HB Modular Carriage (1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board

#100 • 2000 HMC V216 Rosserhead Debarker Model: V216. SN: 1740-00. Drive on the head: Electric. Head type: Steel. Width of head: 12". Debarker HP: 40hp electric. Chain drive: hydraulic power. Includes barn sweep: No. Pantograph: Cable. Cab: Yes, size: 4' x 4'. Controls: Yes, type: Pilot Joystick plus lever and foot petals. Features and Notes: Will be using till sale time, 14' outside of wheel, no support structure, slant track.

#200 • 2018 Komatsu WA200-8 Wheel Loader SN: 85539. Meter reads: 3,461 hours. Engine: Komatsu SAA4D107E-3. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 31" W, 17" T. Tire Size: 20.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates, side window has crack

#1401 • 2006 Volvo L60E Wheel Loader Serial No: L60EV61009. Meter reads: 7,615 hours. Engine: 6DZXL057033. Fuel type: Diesel. ROPS: Enclosed cab. 3rd Valve: No. Tire Size: 20.5R25. Attachments: None Heater: Yes. A/C: Yes, condition unknown. Quick Attach: Yes. 4-speed powershift transmission, 17,000 lbs lift capacity, Not Currently Running, But Does Run (see Video). Transmission currently out of machine and will need a new torque converter and transmission gone through and cleaned. Please call for a quote on having it repaired before it leaves the auction yard.Comes with repair manual on the transmission. Contact Myron Nissley with any questions 574-536-2481

#160 • Wood-Mizer HR120 Horizontal Resaw Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands

#121 • Cornell Edger Gang Saw SN: HD4267035, SN: HD42670352-01, 21" edging capacity, 2 moving saws, 20" saws, only used as edge, 4' x 7' infeed table, 5" x 9' tailing belt with side drop, 2 laser lights, control box, hydraulic drive, support to ground

#115B • Detroit Diesel Series 60 Power Unit Meter reads: 9,810 hours. Control box in sawyer cab, electronic controlled, PEC clutch model CB3-14-A32X

#127 • 2022 Helle Double End Trimsaw SN: 202062, 1 moving saw, computer set, hydraulic on saws, 24" x 25' scrap belt, 7" x 18' capacity, includes stairs and platform

#205 • 2013 John Deere 344J Wheel Loader SN: 1LV344JXCZB030560. Meter reads: 7,397 hours. Engine: JD 4045HT281. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 38" W 24" T. Tire Size: 17.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates. This item will be reserved for loadout until May 3rd.

#1351 • 2000 Master Craft MC-5675-00LW Forklift SN: 4954. Meter reads: 21 hours (not accurate). Engine: Perkins. Fuel type: Diesel. Load capacity: 5,000 lbs. Stage mast: 2. Side shift: No. Fork positioner: No. ROPS: Open. Tire size: (front) 19.5L-24 (rear) 11L-16SLF-3. Tires: Pneumatic. Features and Notes: Good running and operating forklift. Throttle does stick sometimes. Contact Bronson with any questions 574-210-3721

#134 • 2022 Morbark Mulch Hog Grinder SN: 562-059, model: HD30, 34" x 10' vibrating in feed driven from conveyor, hydraulic drive on feed roll, no power, control box, hydraulic pumps, hydraulic tank and hoses

#136 • Morbark 48" Chip-Pak Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters

#1000 • Toyota 7FGU30 Forklift SN: 60267. Meter reads: Unknown. Engine: Toyota. Fuel type: LP. Load capacity: 6,000 lbs. Stage mast: 3. Mast height: 90". Side shift: Yes. Fork positioner: No. ROPS: Open. Tire size: 28x9-15, 6.50-10. Tires: Solid. Features and Notes: Gauges not workin, park brake not working. Runs and operates.