Ben Jones Machinery
Ben Jones Machinery
 706-324-2604

We are the oldest and most trusted dealer of used sawmill and wood processing machinery in the eastern United States. We buy and sell used sawmill and lumber processing machinery with an emphasis on equipment suited for small to medium production operations.

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 5
99 Results Found
Sort By 
Ben-Jones-Machinery
 706-324-2604
Unknown End Dogging Scragg  Scragg Mill
$100,000

End Dogging Scragg 18FT Capacity. 52" blades, 150HP Motors, 18ft 4 strand Log Deck, 2 saw Edger

 Waverly Hall, GA
 706-324-2604

 Call
Unknown End Dogging Scragg 18FT Capacity. 52 bl  Slab Saw
$350,000

Cant Optimizer system consisting of: - Built in 1990 - 12" x 24" x 20 foot - USNR Cant Infeed positioning table - USNR Two (2) sided Model 85 canter module with eight (8) knife Key Knife heads,servo positioner and arbor motors (460/3/60) - USNR Profile module with single top and bottom drum style Key Knife profile heads per side with servo positioners and arbor motors (460/3/60) - 6 ft McDonough Twin Bandmill with slide base, servo setworks cylinder and 200 HP, 1200 RPM arbor motors (460/3/60) - Outfeed side board separator c/w center chainway, hold down rolls, cant kicker, spiral roll side board rollcase, pivoting end bumpers and drives - Operators cab and operator's console - PLC control system - Transverse Scanner c/w two (2) banks of seven (7) JoeScan heads - System hydraulic power unit

 Waverly Hall, GA
 706-324-2604

 Call
Unknown ACME INDUSTRIAL Blower  Blower and Fan
$2,500

ACME INDUSTRIAL Blower - 6 blade material handling fan with 12" wide blades on 30" diameter wheel. Inlet 17" diameter. Outlet 14" x 16". Presently has a 10 HP motor but should have 30-40 HP.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown ACME Manual Face Grinder for Circle Saws  Knife Grinder
$1,200

ACME Manual Face Grinder for Circle Saws - single phase 120 volt. serial 4829.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown AMERICAN  Dry Kiln
$120,000

AMERICAN WOOD DRYER KILN - 2 chamber package type dry kiln. New 1994. Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler room and Boiler . Capacity approximately 50,000 board feet of 4/4 per chamber for a total of 100 MBF. Each Chamber and Boiler room is 36' Long x 20' High x 32' Deep, Rigging Not included.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown ARMSTRONG 81  Bandsaw
$7,000

Includes one hammering block.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown KM-16 Trimmer Line  Trim Saw
$180,000

KM-16 HD line with infeed chain deck, Singulator and Auto dealer

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Morgan Small Log Cutup System  Circular Saw Husk
$45,000

Morgan Small Log Cutup System - 2 each 2 strand x 21' live log decks; saw unit with 60" inserted tooth hydraulic powered circle saw, 33' infeed log trough, log clamp, operator controls; 50 HP hydraulic pump unit.    This system appears to be capable of cutting 16" diameter and possibly even 18" diameter. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Peerless  Chip Bin
Call for Price

Peerless 126 Unit Chip Bin / Truck Loading Bin - capacity of 126 units.    Appears to be in very good condition. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PHL Bin Sorter, 50 sorts, 24 capacity  Lumber Sorter
$425,000

50 Bin Lumber Sorter, J-bar style, 24' capacity. Right hand. Includes lugged 90 degree turn (clockwise rotation). Down and ready to load.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PROGRESS 60  Chip Cyclone
$42,000

PROGRESS 60" Chipper - 6 knife, top discharge. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PROGRESS 7  Chip Cyclone
$7,000

PROGRESS Chip Cyclone - 84" diameter with chip spreader and very tall support stand. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Viking Eng & Dev Sentinel  Pallet Nailer and Assembly System
$17,900

Viking Sentinel Pallet Nailer w/Stacker. Good working condition. Ready to go.

 Waverly Hall, GA
 706-324-2604

 Call
Williams Pulverizer Horizontal  Hogs and Wood Grinders
$15,000

Williams Horizontal 200 HP Grinder, 16 Ft vibrating Conveyor

 Waverly Hall, GA
 706-324-2604

 Call
Wood-Mizer  Resaw-Circular
$25,000

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

 Waverly Hall, GA
 706-324-2604

 Call
Wood-Mizer 2017 6 Head  Resaw-Band
$100,000

6 Head Resaw with Auto Run-A-Round

 Waverly Hall, GA
 706-324-2604

 Call
Woods Model 412  Planer
$25,000

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

 Waverly Hall, GA
 706-324-2604

 Call
Yamani Band  Resaw-Band
$8,500

YAMANI Band Resaw - 1997 model SF800 vertical band resaw with adjustable fence and powered feed rolls. Built in blower to remove sawdust. Numerous bands included.

 Waverly Hall, GA
 706-324-2604

 Call
Yates A95  Planer
$93,000

YATES AMERICAN A95 Planer Matcher - 20 knife machine. Features fabricated frame with 100 HP top head, 75 HP bottom head, setworks for top head and left side head, hydraulic powered feed rolls, removable heads on all spindles, dynamic press roll tensioning, PLC control, chromed and water cooled beds, electronic cutter head brakes, high capacity hydraulic pump unit, operators console, side head setup stand, spare top and bottom heads, motor control center.

 Waverly Hall, GA
 706-324-2604

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved