Sutton Bros Lumber Company

Aug 01, 2020 10:00AM  Tennga, GA

Tri-State Auction & Realty, LLC


 800-334-4395

See All Auctions

Sutton Bros Lumber Company

Tri-State Auction & Realty, LLC

Aug 01, 2020 10:00AM
 Tennga, GA
Bid Online

Land 30 Acres +/-, Buildings

Bio-Mass Wood Fired Coal-Gen Plant

Corley LP Carriage

McDonough MA 72

Nicholson A2 Debarker

Rolling Stock

Land
30 Acres +/-, Buildings,
Bio-Mass Wood Fired
Coal-Gen Plant, Planer Mill
VISIT OUR WEBSITE TO WATCH VIDEO: https://youtu.be/xFEgjWTcdOA

PLANER MILL
- IRVINGTON MOORE 8’ 3 ARM BREAK DOWN HOIST w/STICK REMOVAL SYSTEM w/45’ 4 STRAND INFEED PACKAGE DECK w/#78 CHAIN w/DRIVE
- LOTS OF STACKING STICKS & LUMBER
- IRVINGTON MOORE 50’ 4 STRAND TRANSFER w/#81X CHAIN w/DRIVE
- NEWMAN M255 PINEAPPLE FEED TABLE w/A20 MOTORIZED PLANER
- YATES AMERICAN A2012 PLANER w/DOUBLE PROFILE w/40HP MOTOR
- LOTS OF PLANER HEADS
- 20”X16’ HURRY UP BELT w/DRIVE
- 36”X8’ DECLINE BELT w/DRIVE
- CUSTOM BUILT 20’ 4 STRAND COLLECTOR DECK w/ROOFTOP CHAIN ON COMMON SHAFT w/20’ 4 STRAND TRANSFER DECK w/#81X CHAIN w/DRIVE
- 20’ 3 STRAND PACKAGE DECK w/#78X CHAIN w/DRIVE
- 10HP TANK MOUNTED AIR COMPRESSOR
- PRECISION 3 KNIFE TUB TYPE KNIFE SHARPENER
- 48” SUCTION BLOWER INCOMING & OUT GOING PIPE w/50HP MOTOR
- PRECISION 32”X35’ VIBRATING CONVEYOR w/DRIVE
- PRECISION 18”X45’ VIBRATING CONVEYOR w/DRIVE
DRY KILNS
- 30’X40’ CONVERTER ALUMINUM DRY KILN w/FANS & CONTROLS
- LOT OF KILN CARTS
- SUPERIOR GAS FIRED BOILER
- WEISS COAL GEN PLANT w/3,000 HP MOTOR
ROLLING STOCK
- Trucks & Trailers will be added to inventory. Check website for updated list www.tristate-auction.com

SAWMILL EQUIPMENT
- SLASHER SAW TYPE MERCHANDISER SYSTEM w/CARRIAGE TYPE SLASHER SAW w/72” CHISEL TOOTH SAW w/75 HP MOTOR
- 80’ INFEED LOG TROUGH w/DRIVE
- 30’ 4 STRAND TREE LENGTH LOG DECK w/DRIVE
- 5’X7’ CONTROL CAB
- 5’X5’ CONTROL CAB
- 18”X20’ ALL STEEL WASTE CONVEYOR w/DRIVE
- 15’ ENDWISE LOG TROUGH w/2 ARM KICKERS w/DRIVE
- 30’ 2 STRAND LOG DECK w/DRIVE
- CUSTOM BUILT 90’ BARN SWEEP CONVEYOR w/DRIVE COMING OUT FROM THE NICHOLSON DEBARKER
- NICHOLSON A2 RING DEBARKER w/HOLD DOWN w/CHAIN FEED w/100 HP MOTOR w/4’X6’ CONTROL CAB w/20 HP HYDRAULIC POWER PACK
- 20’ ENDWISE LOG TROUGH w/4 ARM KICKERS w/DRIVE
- 25’ 2 STRAND LOG DECK w/DRIVE
- MELLOTT 40’ 4 STRAND LOG DECK ON COMMON SHAFT w/MELLOTT 22’ 4 STRAND LOG DECK ON COMMON SHAFT w/CUSTOM BUILT 40’ 4 STRAND LOG DECK 4 ARM STOP & LOADER w/#78 CHAIN w/DRIVE
- MCDONOUGH 7’ MODEL 72 BAND HEAD RIG w/AIR STREAM w/HYDRAULIC OPERATED HOOD w/200 HP 460 VOLT 800 RPM MOTOR w/OFF BEARING BELT SN#72MA384-TWR
- CORLEY BAR TYPE LOG TURNER w/20 HP MOTOR w/HYDRAULIC PACK
- ALLEN BRADLEY 7 SECTION MCC PANEL
- CORLEY 5’X10’ CONTROL CAB
- INOVACK SCANNER SYSTEM
- SINGLE LINE LASER LITE
- CORLEY LINEAR POSITIONER 3 HEAD BLOCK CARRIAGE w/ON BOARD TURNERS
- CORLEY 14’ AIR OPERATED SLAB DROP w/CONTROL w/DRIVE
- EXTRA BANDS FOR MCDONOUGH HEAD RIG
- CORLEY 36”X40’ HEAVY DUTY ROLLCASE w/8” ROLLS
- CORLEY 20’ 4 STRAND TRANSFER DECK w/4’ 4 ARM POP UP TRANSFER w/LOG DECK w/#78 CHAIN
- LIGNA 18’ 4 STRAND COLLECTOR DECK w/#78 ROOFTOP CHAIN w/DRIVE
- LOT OF CATWALK THRU OUT SAWMILL
- TYRONE BERRY SM8 280 HYDRAULIC SHOT GUN FEED w/150HP MOTOR
- 8”X48” TOP ARBOR LIGNA GANG SAW w/
QUICK CHANGE DOOR w/INFEED ROLLCASE w/CANT TURNER w/CANT POSITIONER w/16’ OUTFEED ROLLCASE w/SAFETY CAGE w/(2) 200HP MOTORS w/CONTROLS w/SAWS & SPACERS w/LASER LITE SYSTEM
- CORLEY 18’ 3 STRAND COLLECTOR DECK w/#78 CHAIN w/DRIVE
- LIGNA 20’ 4 STRAND COLLECTOR DECK w/#78 CHAIN w/4’ 4 ARM TEMPLE SYSTEM w/DRIVE
- 20”X60’ BELT CONVEYOR w/DRIVE
- LIGNA 30” BOARD EDGER w/INFEED ROLL
CASE w/18’ SINGLE BELT TAILORING SYSTEM w/HYDRAULIC SET w/7 ½ HP HYDRAULIC POWER PACK
- LIGNA 40’ 4 STRAND COLLECTOR DECK w/#78 CHAIN w/CANT STOPS w/DRIVE
- 6”X30” LIGNA EDGER w/(2) MOVABLE SAWS w/2 LINE LASER LITE SYSTEM w/100 HP MOTOR w/CONTROLS
- LIGNA 40’ 5 STRAND COLLECTOR DECK w/#78 ROOFTOP CHAIN w/5 ARM TEMPLE SYSTEM w/DRIVE
- LIGNA 30”X60’ HEAVY DUTY BELT CONVEYOR w/DRIVE
- CORLEY 5 STRAND COLLECTOR DECK w/DRIVE
- CORLEY 20’ 3 STRAND PACKAGE DECK w/DRIVE
- LIGNA 24”X48’ BELT CONVEYOR w/DRIVE
- LSI 8 STRAND UNSCRAMBLER w/DRIVE
- LSI 36”X18’ SPIRAL ROLLCASE w/EVEN ENDER
- LSI 20’ DROP SAW TRIMMER w/MOTOR & CONTROLS
- MISC PARTS, BEARING, SPROCKETS, PULLEYS, BELTING, CYLINDER, ELECTRICAL
- PRECISION 58” 6 KNIFE CHIP PACK w/7’X7’ SCREEN w/COLLECTOR w/125 HP MOTOR
- CUSTOM BUILT 20’ 4 STRAND TRANSFER DECK w/#78 ROOFTOP CHAIN w/DRIVE
- PHELPS 36” DUAL TRAILING LOADING SYSTEM w/30HP MOTOR w/CONTROLS
- PHELOS 36” SINGLE TRAILING LOADING SYSTEM w/25 HP MOTOR
- WEBSTER 24”X130’ HEAVY WASTE CONVEYOR w/MDI METEAL DETECTOR w/FINE SECTION
- WEBSTER 24”X90’ HEAVY WASTE CONVEYOR
- 20’ ALL STEEL WASTE CONVEYOR w/STEEL DRAGS w/INCLINE w/DRIVE
- MELLOTT 19”X30’ VIBRATING CONVEYOR
- CUSTOM BUILT 24”X45’ BELT CONVEYOR w/DRIVE
- GE 6 SECTION MCC PANEL
- GE 4 SECTION MCC PANEL
- GE 7 SECTION MCC PANEL
- EASTER SASH CHIPPPING SAW w/100 HP MOTORS w/INFEED LADDER BACK CONVEYOR w/20’ OUTFEED ALL STEEL WASTE CONVEYOR w/DRIVES
- PRECISION 75’ BARN SWEEP CONVEYOR
- 24” SUCTION BLOWER w/10HP MOTOR
- PRECISION 58” 6 KNIFE CHIPPER w/HORIZ. FEED TYPE DISCHARGE w/300 HP 460 VOLT MOTOR
- INGERSOLL RAND SCREW TYPE AIR COMPRESSOR w/100 HP MOTOR
- GARDNER DENVER SCREW TYPE AIR COMPRESSOR w/75 HPP MOTOR
- (2) AIR STORAGE TANKS
POST PEELER & DEBARKER
- MORBARK PS8 POST PEELER INFEED w/OUTFEED AIR GLASS ROLLCASE w/75 HP MOTOR w/CONTROLS
- MORBARK 10’ DOUBLE END TRIMMER w/10 HP MOTOR w/CONTROLS
- PRECISION 40’ INCLINE BARN SWEEP CONVEYOR
- PRECISION 60’ BARN SWEEP CONVEYOR
- CAMBO 26” RING DEBARKER w/50HP MOTOR w/20 HP HYDRAULIC POWER PACK SYSTEM
- 20’ ENDWISE LOG TROUGH
- 4’X6’ CONTROL CAB
- 40’ 2 STRAND INFEED LOG TROUGH w/#132 CHAIN w/DRIVE
- 20’ ENDWISE LOG TROUGH OUTFEED w/4 ARM OVERHEAD KICKERS w/DRIVE w/#132 CHAIN
- 20’ 4 STRAND TRANSFER DECK w/#78 CHAIN w/DRIVE
- 30’ 4 STRAND INCLINE LOG DECK w/LOG LUGS w/DRIVE
- WEBSTER 22”X30’ VIBRATING CONVEYOR
- APPROX 8’ CYCLONE
- 24”X60’ INCLINE BELT CONVEYOR
CHIP MILL
- RADIUS CRANE w/MACK GRAPPLE TRACK WAY & CONTROLS
- CIRCULAR TYPE SLASHER SAW SYSTEM w/LOG SPLITTER
- PRENTICE 410 STATIONARY KNUCKLEBOOM LOADER w/CONT GRAPPLE w/100HP MOTOR (HAS FIRE DAMAGE)
- PRECISION 18”X90’ VIBRATING CONVEYOR LOCATED UNDER DRUM DEBARKER
- 10’X60’ DRUM DEBARKER w/DRIVES & CONTROLS w/30’ INFEED CHAIN CONVEYOR w/#132 CHAIN w/70’ OUTFEED 3 STRAND CHAIN CONVEYOR w/#132 CHAIN
- PRECISION 18”X80’ VIBRATING CONVEYOR
- BARKO 160D STATIONARY KNUCKLEBOOM LOADER w/CONT GRAPPLE w/JOYSTICK CONTROLS w/100 HP MOTOR
- 5’X5’ CONTROL CAB
- PRECISION 84” WHOLE TREE CHIPPER w/400HP 875 RPM 460 VOLT MOTOR w/HYDRAULIC HOOD w/30’ ALL STEEL WASTE CONVEYOR w/DOUBLE LADDER BACK CHAIN INCLINE w/DRIVE
- 36”X32’ CONCAVE BELT CONVEYOR w/DRIVE
- ALLEN BRADLEY 450HP STARTER
- 36”X50’ CONCAVE BELT CONVEYOR w/DRIVE
- 42” SUCTION BLOWER w/20HP MOTOR w/DRIVE
- 36”X100’ RADIO STACKER w/DRIVE
- APPROX 10’ CYCLONE SYSTEM FOR DUST STORAGE
TRIMMER BUILDING
- NEWMAN KM16 5 HEAD MULTIPLE TRIM SAW w/5 HP MOTORS w/BLOCK & STOCK CONVEYOR w/18’ 3 STRAND UNFEED PACKAGE DECK
- 8’ 3 ARM TILTING BREAK DOWN HOIST w/STICK REMOVAL SYSTEM w/25’ 3 STRAND INFEED PACKAGE DECK w/DRIVE
- 36” SUCTION BLOWER w/25HP MOTOR w/INCOMING & OUTGOING PIPE w/APPROX 10’ CYCLONE SYSTEM
- 20’ 4 STRAND TRANSFER DECK PART OF BREAK DOWN HOIST
- 12”X40’ ROLLCASE w/DRIVE
- 10’ 3 STRAND TRANSFER DECK w/DRIVE
- MCDONOUGH MODEL 54 BAND CENTER SPLIT RESAW w/40HP MOTOR
- 40’ 4 STRAND #81X GREEN CHAIN w/DRIVE
- 18” X 40’ BELT CONVEYOR w/DRIVE
- 10’ TURN TABLE w/DRIVE
- PRECISION 48” 3 KNIFE CHIPPER w/75 HP MOTOR USED FOR BLOCK CHIPPER
- NEWMAN KNO 20’ DROP SAW TRIMMER w/7.5 HP MOTOR w/CONTROLS
- 40’ 4 STRAND TRANSFER PACKAGE DECK w/81X CHAIN w/DRIVE
- 20’ 4 STRAND TRANSFER PACKAGE DECK w/81X CHAIN w/DRIVE
MOSLEY SORTER GRADING LINE
- MOSLEY SORTER w/INFEED 4 STRAND UNSCRAMBLER w/18’ 3 STRAND PACKAGE DECK w/#81X CHAIN w/DRIVE
- 120’ 3 STRAND GREEN CHAIN w/DRIVE
- (2) 30”X20’ HEAVY DUTY ROLLCASE w/DRIVE
- 20”X100’ CONCAVE BELT CONVEYOR w/NO BELT w/DRIVE
- 24”X50’ CONCAVE BELT CONVEYOR w/DRIVE
- 48”X20’ HEAVY DUTY ROLLCASE w/DRIVE
- MISC SPROCKETS, PULLEYS, DRIVES
- 40’X50’ CONCAVE BELT CONVEYOR w/DRIVE NO BELT
- CORLEY 5’X6’ CONTROL CAB
- DRESSER MODEL 6220 TRACK MACHINE w/MODEL 873 PRECESSING HEAD
MISC
- (2) TRAIN CAR TANKS
- STEEL RACKS, STEEL
NOT INSTALLED
- CORLEY 6 STRAND 90 DEGREE CONVEYOR w/LSI GRADE POCKET SYSTEM (BRAND NEW)
- 45’ ALL STEEL WASTE CONVEYOR w/110 LADDER BACK CHAIN w/DRIVE
- 40’ ALL STEEL WASTE CONVEYOR w/110 LADDER BACK CHAIN w/DRIVE
- MISC CATWALK & STEPS
- STEEL STRUCTURE & I BEAMS
- LSI STACKER SYSTEM w/HOIST SYSTEM w/PACKAGE DECK w/TRANSFERS
- PRECISION 84” 4 KNIFE CHIPPER
- REAMS WHOLE TREE METAL DETECTOR
ROLLING STOCK
- PRENTICE 410B KNUCKLEBOOM LOADER w/DETROIT ENGINE MOUNTED ON SELF PROPELLED CARRIER
- INTERNATIONAL EAGLE SPOT TRUCK
- 410C KNUCKLEBOOM LOADER w/CONT GRAPPLE w/JOYSTICK CONTROL w/CUMMINS DIESEL ENGINE MOUNTED ON ARTICULATING SELF PROPELLED CARRIER w/HIGH RISE CAB
- FORD F800 SINGLE AXLE DUMP TRUCK FLATBED DIESEL ENGINE
- INTERNATIONAL MODEL 125 TRACK FRONT END LOADER
- BOOM POLE ATTACHMENT FOR FORKLIFT
- CAT 988B ARTICULATING WHEEL LOADER w/BUCKET NEEDS ENGINE REPAIR
- CASE 586E BIG WHEEL LOADER NEEDS REPAIRS
- PETERSON MODEL HC4400 HORIZONTAL GRINDER w/CAT ENGINE SN#6A15162
- TAYLOR MODEL 180 BIG WHEEL FORKLIFT NEEDS ENGINE REPAIR
- TAYLOR MODEL 220 DUAL WHEEL FORKLIFT w/8’ FORKS NEED ENGINE REPAIR
- TAYLOR 27,000LB DUAL WHEEL FORKLIFT w/8’ FORKS NEED ENGINE REPAIR
- (2) LTL FORD TANDEM ROAD TRACTORS
- (3) LT FORD TANDEM ROAD TRACTORS
- (6) 40’ FRUEHAUF CLOSED TOP CHIP TRAILERS
- (3) 42’ PEERLESS OPEN TOP CHIP TRAILERS
- PEERLESS 45’ WALKING FLOOR TRAILER

By Order of First Bank of Dalton Note: There will be a 10% onsite and 13% online Buyers Premium added to the final sale price on all items sold. All equipment will be sold onsite and live online bidding will be available at www.bidspotter.com. All announcements made sale day take precedence over any/all written material. A bank letter is required when paying with a company or personal check. All sales are final and buyer is responsible for removal of equipment. We do not accept credit/debit card. If you are tax exempted bring your tax exemption letter on the day of the auction when you register, if you do not bring it you will have 2 weeks after the auction date to send in your tax exemption letter or you will not be reimbursed, no exception. GA LIC#004299


Tri-State Auction & Realty, LLC
 800-334-4395
 865-376-7009

We are Tri-State Auction & Realty, and for over 40 years we have worked to provide the industry with the services needed for each situation. Our goal is to treat all of our clients, buyers and sellers, honestly and fairly.

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved