You Have Selected
10 Results Found for Salsco, Inc Viewing 1 - 10 of 10 results

Salsco 12

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco Model 818

The Model 818 is a single feed roll unit with an 18" x 18" infeed opening. Designed for mountains of brush and large branches, this chipper feeds up to a rate of 65' per minute, and is almost impossible to keep up with. Horse power options range from 127HP - 140HP diesel engine packages with lockable engine enclosures. Live Hydraulics, 9,000 lb. Heavy Duty Jack, Dual 5,000 lb. Capacity Axles, Electric Brakes, Wide Tires, 360 Degree Exhaust Chute and Heavy Duty Fenders with Light Enclosures, are all part of the standard base unit. The Model 818 has dual reversible, sharpenable bed knives and utilizes 1/2" thick double sided chip blades. All tanks and boxes are lockable, and all tanks have drain plugs. OPTIONS ARE AS FOLLOWS: (Click on the Specification tab below to view the full specifications and all the options that are available.)
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 20

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 30

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 40

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 60

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 810M

The 810M has an extra wide 18" infeed opening to handle huge amounts of brush with ease. The infeed handle has a full reverse, neutral, slow and fast speed and is easily accessible from either side of the infeed. Double bed knives, one horizontal and one vertical, are adjustable and sharpenable and provide excellent chipping power when processing vines, palmfronds and evergreens. Easy to operate & easy to maintain, this unit will provide years of dependable service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco 826PTO

As with all Salsco equipment, the Model 826PTO is built to last and has proven itself for well over 15 years of service. The first units built are still out there and running strong. The extra wide 12" infeed opening accommodates brushy material and greatly reduces the time spent prunning and trimming. Saw mill operators can easily chip up to 12" wide slabs, and rid their property of those unsightly piles of slab wood that accumulate.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco SC-6

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682

Salsco SC-12

Salsco Shaving Mills utilize hardened razor-backed cutter knives which provide hours of operation in between sharpenings, depending on the materials being shaved. The cutter shaft on the Salsco Shavings Mills is specially designed to cut in both directions and remove shavings throughout the cut. Mills are fully automatic, with sensors to prevent over-travel of the wood box. From the smallest mill to the largest, built tough to provide years of continuous service.
Salsco, Inc

Cheshire,CT
203-271-1682