•Durand plywood stacker •Will stack panels up to 5ft wide x 10ft long panels •Serial # 1286 •Was in use on skinner/trimmer line when the plywood mill went out of business •Currently stored inside, and ready to load on a truck •No charge for loading

large Eastey heat shrink tunnel Eastey ET 22-20-MBV2 heat tunnel, inside chamber size 24 wide cx 20” tall 220 volt, 3 phase, 50 amps, Year: April 2012 Model ET 2 (z?) 120-MBV2 Serial# ET242052120402, weight 1,000 lbs, Approximate measures: 26” wide x 20 ½” tall, wire belt measures 23 ½” wide, Can provide test run video under power. No charge for crating item Call for a delivered price to your location

Industrial pneumatic pop-up chop saw Pneumatic up-cut jump saw MADE IN USA 5HP Baldor motor Volts: 208-230/460, 3phase TEFC, Stored inside, Can provide demonstration video of saw under power. Will ship in a wooden crate Can quote a price including freight

ITW Muller Stretch wrapping packaging system, 120 volt 3 post overhead Rotary arm stretch wrapper Model# Cobra 500 Allen-Bradley Panel View 300 Micro touch screen Video of wrapper operating is available Packaging and loading is included in price 120 volt, single phase Serial# E1510406 13 amps/ 1.8 KVA/ 60Hz.

L & M Verticut 2000 Saw bars, LM unit saw bars Overall length 68”+- 5 bars available Used Saw chains available Contact us for a delivered price

used 300HP electric motor, tested ran at independent motor shop, have paper work and video, looks to be rewound from the wire leads

Montgomery Blo-Hog, drop feed Steel Flywheel for surge loads Top infeed opening: 18 ¼ X 13 1/4” Bottom discharge Will be repainted Model: ER 18S315FHDL Serial # 1032 75 hp motor. 230/460V, frame: 405T, Support stand Extra parts Contact us for a delivered price

100hp Quincy Northwest QNW-V-100-F rotary screw air compressor Rogers 500 CFM air compressor Model: QNW-V-100-F Both compressors are photographed in the photo gallery Serial #1-- 060116 and #2-- 060117 Air end: model FSS204102, serial# NA064325, P/N 144220-001 Date: 4/25/2006 Motor: Toshiba 100hp, 460 volts, Two identical compressors are available Prior use was inside of a building Contact us for price and a freight rate. Can provide test run video

used Rader feeder/airlock, 25 x 30inch feeder, Rader 25" x 30" esw feeder, serial# PM 1217, pneumatic conveying adapter mounted to bottom of airlock (air swept) discharge pipe ( 18” & 19”)and stand, 5HP, 230/460 volt, RPM 1745, 184T frame, speed reducer: Falk model 4207J 25 gear drive- ration 24.99:1, used metal airlock, used metal feeder Rader metal wheel rotary feeder valve airlock speed reducer and motor, feeder body was repainted, will provide demonstration video during test run.

6 ft Blue Babe deck saw bars 72”+- overall length 3 bars available 5 Oregon chains available Contact us for a delivered price

Superior Systems 75HP paddle wheel fan, material handling fan Fan wheel size: diameter 33”, width 9”, thickness 3/8”+, Inlet 19” diameter, Outlet 18” x 16”, Reliance motor: 75HP, 1780 RPM, 460 volt, frame 365T, encl.: TEFC, Fan has been repainted blue Test run of fan with demonstration available

13 ft diameter dust cyclone with attached stand, 40 ft approximate length/height Support stand and caged ladder included- view pre-dismantled photos for ladder & platform details Dismantled and Stored in our yard for prompt shipment, 13 ft diameter dust cyclone with attached stand Airlock available at additional cost, will include test run video upon request Contact us for a delivered price to your location

TDS Technologies linear spray systems, TDS linear spray system, Wood treatment spray boxes, 2 spray boxes and pump available, only used about 16 months, cleaned and stored inside, contact us for more photos and details. Graco part# 649006, serial # A2007840, date code A 4915, series A, max PSI 125, made in USA, 1050P-P01AP1PPPTPTPT, Stored inside our warehouse, ready for quick delivery

•Stainless steel fan (wheel and fan body) •Clean air type fan wheel (might be a backward curved?) •Inlet 25 1/2?, Outlet width 19? X 23 1/4? •wheel diameter 33? and width of wheel is 8? •no motor (used motor available) •Fan performance is only a guess- 5,000 to 26,000 CFM, 0 to 9 inches of static pressure •No tag is on the fan •Stored inside

Electric Hydraulic powered 8,000 LBS. scissor lift table, 16ft x 4ft Advance material Handling limited 16ft long X 4ft (49”) wide Model: I _ SLI-38 TLA?? Made in Canada Date: 10/23/2001 Serial # 7472 3-phase Pump Baldor motor 1-1/2hp, 460 volt Video of scissor lift operating

484RF10 baghouse, two dust collector systems available, 6,180 Sq. Ft. cloth area, bolted down rectangular type bags and gasketed cages(484 10ft filter bags Donaldson-Torit type), rotating type arm inside walk-in top plenum, Two fan options Reverse Pulse filter cleaning system- PD pump 7 1/2hp, Explosion vents – pressure relief doors Airlock, Tangential scroll inlet, inlet deflection baffle & air straightener vains 60 degree conical bottom hopper Hopper access door Top walk-in access compartment for filter bags replacement. Abort gate, Has been removed in one piece for quick and easy reinstallation Stored in our yard- ready to load ( no charge) for prompt shipment, Call for a delivered price to your location, Baghouse Approximate height 46ft, diameter 13ft 6”+-, weight? ( F.05.250.)Allied Blower fan, 250HP motor Reliance Electric Duty Master 841 XL , 1785 rpm, 450 BI, serial# 1743, order# 19925, sys.rto, ( Twin city Fan: size 450, type RTF-SW, ARR 1, class 23, serial # 01-163289-1-1) inlet 38”, outlet 36” x 29”, ( F-01-360) 250HP motor Reliance Electric Duty Master 841 XL, 1785 rpm, size 90, serial#1720, order# 19925?, inlet 38”?, 36” x 30” outlet,

used 50 inch feeder, 36" x 50" feeder, Archer 36" x 50" feeder airlock, used Archer 36 x 50 feeder airlock, Archer model# 36/50 , 1 inch thick knifes/blades, overall height 44 1/2", can provide video demonstration of gear box motor running, repainted blue, more photos available before and after paint,

•Burelbach 4 x 10ft stacker •Removed from plywood mill that went out of business, was in use at time of shut down •Currently stored inside

6 ft diameter stainless steel cyclone, Stainless 6ft dust cyclone 6ft diameter, dust inlet 17” x 16”, top outlet 32”, bottom outlet 20”, overall length 16ft, Inlet and or outlet may not be stainless, contact us for details. Price with shipping is available.

•Culter Hammer Solid State Reduced voltage starters •Two available