Kittrell Sawmill Brokers and Appraisers
Kittrell Sawmill Brokers and Appraisers
 931-797-6284

It is our goal at Kittrell Sawmill Brokers and Appraisers to bring the Forest Products Industry services with high standards of integrity; assisting them with an easy convenient way to stay connected to machinery for sale, to offer a means to sell machinery at private sale and at auction and offer appraisal services that will allow companies to remain diversified and competitive in today’s global wood products market.

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
28 Results Found
Sort By 
Kittrell-Sawmill-Brokers-and-Appraisers
 931-797-6284
2024 Akkuslar Double Arbor 220 TIGER  Gang Saw
Call for Price

Brand new Double Arbor Gang Saw. This one is 8". But can get you one built up to 12". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. Call Jackie 931-698-3342. The manufacturer Akkuslar A Turkish machine tried and proven in Turkey, Europe and Asia for over 50 years. This machine will be at the Richmond Expo April 12-13 you can take delivery April 13 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284

 Richmond, VA
 931-797-6284

 Call
2024 Akkuslar HCDM 2M160  Gang Saw
Call for Price

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

 Spring Hill, TN
 931-797-6284

 Call
Buss 44  Planer
$9,750

Buss Type 44 36" Wide Top Planer ready to go still hooked up to run yourself. Motivated seller says let's go! 3 phase 440/480 Volt Call Amy 928-723-9449. 931-797-6284

 McMinnville, TN
 931-797-6284

 Call
Caterpillar  GenSet
$14,900

CAT Generator, Call Amy for Details 928-723-9449

 Okawville, IL
 931-797-6284

 Call
Custom Built Gravity Roll  Conveyor General
$4,500

OWNER IS RETIRING! Sliding Gravity Roll Case for Straight Line Rip Saw, Special Design w/ air stop brakes, (2) steel overhead mounts and one laser light, Excellent for Precision Edging. Seller will load on your truck. (ref #74) Call Rachel for more information 931-797-6284

 Cameron, SC
 931-797-6284

 Call
Delta/Rockwell G-50569  Table Saw
$3,550

Rockwell table saw will take 12” or 14” blades, new 7.5 motor, includes a used Biesemeyer fence put still has original fence on machine, Ref # 186, Call Amy for more information 928-723-9449

 Ravenel, SC
 931-797-6284

 Call
Dependable  Moulder
$9,000

Dependable 4 head push through moulder. Still hooked up and ready for you to work Call Amy. 928-723-9449

 McMinnville, TN
 931-797-6284

 Call
Diehl SL52  Straight Line Rip
$15,500

Nice Condition and cuts a glue line machine still in production so you can run it yourself. We are motivated to sell so make you offer today! 3 phase 480/440 volt Call Amy 928-723-9449. 931-698-3342

 McMinnville, TN
 931-797-6284

 Call
Grizzly  Shaper
$7,500

Grizzley shaper w/ Steff 2044 material feeder, ref #184

 Oden, IN
 931-797-6284

 Call
Grizzly G-50569  Bandsaw
$3,550

Grizzly G0569 Bandsaw, 24”, 7.5 HP, heavy duty, (2) new blades still in the box, guide bearings have been replaced, excellent condition, Ref # 186, Call Amy 928-723-9449

 Ravenel, SC
 931-797-6284

 Call
Hemco  Trim Saw
$40,000

Hemco double end trimmer w/ even end rolls, feed through chains & outfeed chains (trimmer can sell with stack and sort line upon request), Call Amy for more information 928-723-9449 OBO

 Asheboro, NC
 931-797-6284

 Call
Hemco  Lumber Stacker
$150,000

Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, Call Amy for more information 928-723-9449 OBO

 Asheboro, NC
 931-797-6284

 Call
Ingersoll-Rand SSR II  Air Compressor
$10,000

Ingersoll Rand SSR II 50 HP screw type air compressor, believed to have 20,000 hours, Ingersoll Rand Model TS2A dryer 150 PSI Max refrigerant dryer (ref #174), Call Rachel for more information 931-797-6284

 Centerville, TN
 931-797-6284

 Call
Jeffrey 44MB  Hogs and Wood Grinders
$8,950

Jeffrey Model 44MB hog, bottom discharge, top feed w/ 200 HP motor, mounted on steel frame (hammers are heavily worn as thy were used for regrinding chips) (ref #162) Call Amy for more information (928) 723-9449

 Bushnell, FL
 931-797-6284

 Call
Mattison 404  Straight Line Rip
$7,250

Mattison Model 404 straight line rip saw, ref #184

 Oden, IN
 931-797-6284

 Call
Mikron R200  Moulder
$7,000

Mikron R200 Rosette Maker W/ hopper feed, ref #184

 Oden, IN
 931-797-6284

 Call
Powermatic Model 81  Bandsaw
$3,000

Nice powerful bandsaw with extended table still running so you can run it yourself "try before you buy". (2) available for sale. Seller is motivated so if you need this saw let's talk. Call Amy. 928-723-9449 931-797-6284.

 McMinnville, TN
 931-797-6284

 Call
Powermatic 2024  Planer
$6,950

Powermatic 2024 planer, 18” wide, ref #184

 Oden, IN
 931-797-6284

 Call
Reckart  Resaw-Band
$85,000

REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000

 McDermott, OH
 931-797-6284

 Call
2007 Renzo Borgonovo SEPARATRICE  Lathe and Carver
$150,000

2007 Renzo Borgonovo Model SEPARATRICE Type L.C.B 601spiralling lathe, S/N 4119 w/ spiral separator and attachments (wood etc.), ref #184

 Oden, IN
 931-797-6284

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved