You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Integrity Truck & Equipment Viewing 1 - 10 of 10 results
$72,900
-A Bandit track chipper with cab and loader that is ready to work tomorrow. With its proven 2 knife disc and site mobility paired with a pre-emission 210 hp Caterpillar engine, this machine will chip tree tops, brush, and logs up to its 14” capacity. ?-210HP Cat Engine - EROPS with Heat - Undercarriage is in good shape - 2 Knife Disc -Valby 50HD Grapple -New pins and bushings in boom - 14" Capacity ?- Under 18,000 .lbs
Equipment Location:Grandville, MI
$63,500
Recently had transfer case rebuilt Two New Tires New rotation motor on the grapple and a prolenc to attach the grapple Cummins 4bt Engine Clutch and Boom Rebuilt Pumps Recently Replaced AC and Heat Work Well Tight Machine 11,500 Hours
Equipment Location:Muskegon, MI
$134,900
2011 Caterpillar 320DL Hours: 3960 148hp This clean and tight tier 3 excavator has been fleet maintained and is ready to work. The auxiliary hydraulics opens this unit up to a world of possibilities and the heat and air in the enclosed cab and pattern changer keep the operator comfortable and focused on the task at hand. This clean and tight tier 3 excavator has been fleet maintained and is ready to work. The auxiliary hydraulics opens this unit up to a world of possibilities and the heat and air in the enclosed cab and pattern changer keep the operator comfortable and focused on the task at hand. Features: 9 ft. 7 in. Stick Light Boom-Right Side Lights, Cab Mounted (2) Power Supply (12V-7 AMP) Product Link (PL121SR/PL321SR) Hand Control Pattern Changer Rear Window secondary exit Sunscreen-roller type ?Seat, high back with air suspension and heater Third pedal, straight travel Wiper, Lower windshield Washer, windshield High ambient cooling for conditions up to 125 degrees farenheit. Prefilter air Starting- Cold Weather Package - Two additional batteries - High capacity starter motor - Heavy duty cable - Jump-start receptacle - Water level indicator (Fuel) Long undercarriage 32 inch Heavy-duty triple grouser Auxiliary hydraulics - Hammer Circuit For single function (1 way/2 pump) hydraulic tools - Thumb circuit For double function (2way/ 1 pump) hydraulic tools Tool Control System - For single or double function, (1 or 2 way, 1 or 2 pump) hydraulic tools Joysticks with additional switches Program up to 10 tools in memory Capability of adding medium pressure. Medium pressure circuit for tools requiring medium pressure. Hydraulic pin grabber, quick coupler 32" Tooth Bucket
Equipment Location:Grandville, MI
$75,000
This Fabtek 133 is working in the woods now. Features: Rebuilt head New saw motor New swing drive New encoder New AC 19,900 Hours
Equipment Location:Grandville, MI
$68,900
This well maintained hydro ax 721E has the power and ability to make a difference with your job site preparation and clean up. 1998 Hydro Ax 721E Good tires New mower shaft, bearings, seals, and hardware Rebuilt clutch Fleet Maintained Meter states 762 hours, but unit has around 5000 hours (with documentation) Cummins 8.3L engine
Equipment Location:Grandville, MI
$269,000
Morbark’s heavy duty chipping solution with a power packed C18 Cat engine, all fit together into a legal load size. All of this with the comfort of an enclosed cab with heat and air conditioning, coupled with a loader, replacing the need for two machines on site to complete chipping. 2009 Morbark 40/36 WCL -700hp Cat C18 - Red Dot Air Conditioning and Heat - Super Single tires with 85-90% tread life left - Onboard air compressor for changing knives - Knife gauge, babbit, ladel included Recent Morbark Factory Repairs New boom pins and bushings New Paint and decals Added externally adjustable anvil Fresh service on fluids and filters
Equipment Location:Grandville, MI
$279,900
Morbark’s largest and most powerful solution for tracked mobile chipping on a job site. This 50/48 has a Cat 3412 Cat engine, a cab with heat and air conditioning, and a 250 loader that can handle a very large tree with ease. ITEMS REFURBISHED BY MORBARK: Belly bands replaced Drum rebuilt and balanced (200 hours ago) New loader pins and bushings All new glass in cab New wire harness and electrical box All hoses are new and many new fittings New Clutch New paint and decals New track chains, sprockets and hardware New joysticks in cab Remanufactured radiator
Equipment Location:Grandville, MI
$225,000
Cat 3408 Engine 575 hp EROPS Cab heat and AC 2 Year old A3 Drum New Engine Installed by Cat with documentation Triple Grouser Tracks 250-2 Loader 4600 Hours
Equipment Location:Grandville, MI
Call for Price
Marsh Master 2 available for buy or rent. Advantages of the MM-2LX: Increased Flotation Larger Cargo Area Lower Ground Pressure Higher Ground Clearance Enhanced Maneuverability when Afloat Auxiliary hydraulics. Can be outfitted with a spray rig
Equipment Location:Grandville, MI
$150,000
With a Hultdin Grapple and Telescoping squirt boom, this forwarder help maximize efficiency whether setting crane mats or loading logs! This unit has also been set up with combo hydraulics and can run a processor head. Being fleet maintained, this machine is ready to go to work for you! Hours: 8900 Squirt Boom 700.5 Tires Hutdin Super Grip 2 Grapple Ready For Work Fleet Maintained
Equipment Location:Grandville, MI