Go Fast Mfg LLC
Go Fast Mfg LLC
 800-854-7439
 920-986-1173

Go Fast saws are the forest industries best low profile thin kerf resaws for pallet and grade lumber, de-dusters, chop saws and custom machinery. Known for low cost, quality built machines that last and produce a profit since the 1990's. Now UNDER NEW OWNERSHIP! Our entire line of quality machines are once again available as well as parts, most of which are in-stock!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
9 Results Found
Sort By 
Go-Fast-Mfg-LLC
 800-854-7439
 920-986-1173
2024 Go Fast Mfg MN-10  Notcher
$8,500

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.

 New London, WI
 920-986-1173

 Call
Go Fast Mfg NXL  Notcher
Call for Price

The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.

 Shiocton, WI
 920-986-1173

 Call
2024 Go Fast Mfg NXL-M  Notcher
Call for Price

NXL-M Single Head Notcher. 20HP motor, can notch 4 stringers at a time. Notches new or recycled material. Equipped with a pop-up guard. Table floats on linear bearings and takes minimal effort for the operator to move.

 New London, WI
 920-986-1173

 Call
Go Fast Mfg TS10  Trim Saw
Call for Price

The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!

 Shiocton, WI
 920-986-1173

 Call
2019 Go Fast Mfg TS10  Trim Saw
$11,000

TS10 Single End Trim Saw - 8” Wide, 18”- 60” Length Capacity - 2060 Chain w/ cogg attachments - 1” Blade Arbor - 1-1/4” Chain Drive Shaft - Waste/ Dust Chute 24" off floor - Fork Pockets - 3 Plate Stops Included - 1 Long Board Stop Included - Table Height: 36” - Dimensions: 89” L, 55” W, 52” H - Approx. Weight: 1600 lbs -230V 3PH

 Shiocton, WI
 920-986-1173

 Call
Go Fast Mfg TWIN NXL  Notcher
Call for Price

The “Twin NXL” is a heavy-duty double head notcher designed to fill the gap between today's entry-level single head pneumatic notchers and high-end, expensive, auto-feed double head notchers. Notch new or recycled material or even 6" wide cants.

 Shiocton, WI
 920-986-1173

 Call
2023 Go Fast Mfg 6x6 2 Head  Resaw-Band
$32,500

NEW LOWER PRICE 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO

 Salem, MO
 920-986-1173

 Call
Go Fast Mfg DD79  Deduster
Call for Price

The Go Fast Deduster is the solution to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. THE DIFFERENCE: There are several features that set the Go Fast DeDuster apart from the rest, and it all starts with the brush! Our side sweeping disc brushes sweep sideways, providing cleaner boards than traditional drum brushes. They also do not require an air collection. BOARD KNOCKER: Our famous board knocker system helps meter the boards through the machine one at a time. It breaks frozen and sticky boards apart and prevents 99% of jams!

 Shiocton, WI
 920-986-1173

 Call
2010 Linde H50T-394  Forklift
$38,500

BONUS Price includes $1500 shipping Credit -10,000 Lb -LPG -Triple mast 178.5”, 53” carriage, 48”x6”x2” forks, 53”x 48” tall LBR -300-15 SE drive tires, -Power steering, -E-brake, fire extinguisher, backup alarm, full cap W/heater, wipers, defroster, strobe, block heater. -10,950hrs. -Very good condition; fully reconditioned.

 Springfield, MB
 920-986-1173

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved