Costa 53" Sander Model 80 CT 1350 Wide Belt Sander (2) Machines available!

Costa Model 81 C 1350 Wide Belt Sander

Orbital Sander Line 2004 DMC Unisand 2000 Timesavers Model 252-4C

DMC Unisand 2000 43" Wide Belt Sander Includes: Murphy Rogers Dust Dust Collector

DMC SD30 Composition RCS 110 230 volt - 3 phase Frequency 60 hz "B" version for RCS 95 - RCS 110 Electronic readout in "inches" RA grooved steel calibrating roller, 1st group Feed belt speed controlled by inverter with 0,75 kW (1 Hp) 18,5 kW (25 Hp) main motor Automatic device for feed belt tracking and tensioning

37" width capacity Single head 60" belt length Digital thickness controller Electronic belt tracking vVariable speed drive

Heeseman LSM8 Wide Belt Sander

HEESEMANN LSM-8 C/L Wide Belt Sander, (2) Heads 53" (1,300 mm) Width cap., (1) Segmented cross-belt & (1) longitudinal combination head with segmented platen. Head Configuration: · 1st Head: Segmented cross-belt, 5/8" wide segments (86 total) with "CSD" control, abrasive belt size 5.9" x 244", (5,400 mm X 150 mm ) inside chevron belt 5.9" x 191", sanding belt speed 5-12 m/s with 17 HP motor. (Inverter controlled) · 2nd Head: Combination head, with segmented polishing platen, 5/8" wide segments with CSD control, 17 HP motor, 106" x 53" ( 2,620 mm X 1,350 mm ) abrasive belt size. (Inverter controlled) Equipped with & Features: · HESSEMANN's patented "CSD" magnetic pressure adjustment system, sensors spaced every 5/8" (16 mm) sense part configuration; (2) mm part thickness variation can be sanded without sand through’s, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required. · The "CSD" computer control will hold approx. (20) programs or part configurations. · Additional features: Outfeed rotary panel cleaning brush with single end adjustment, 2 HP motor, air blast abrasive belt cleaners on all heads. · Variable feed speed from 13 to 82 FPM via Stober drive, 6.5 HP feed drive, motorized thickness opening 1/4" to 3-5/32" maximum. · Belt condition at 80% good.

3 Head - 3 Phase - Mfg Year: 2011 - Three head sander - 15 H.P. Cross Belt - Variable Speed, Segmented Platen - 15 H.P. Combi Head Roller, Segmented Platen Variable Speed - 15 H.P. Plate Variable Speed - Segmented Platen - Motorized opening

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

Homag SWT 100 series includes the following features: Height Adjustment System – 100 Series Conveyor bed is adjusted by four (4) large diameter dual supported threaded spindles • Calibration sanding • Veneer sanding • Fine sanding of solid wood • One machine for multiple sanding jobs • Easy to use and quick setup times • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Workpiece thickness: 3 mm to 160 mm (1/8" to 6") • Working width: 1100 mm (43") • Abrasive belt width: 1120 mm (44") • Abrasive belt length: 1900 mm (75") • Abrasive belt changing side: left Conveyor Drive System Variable frequency-controlled feed speeds of 2.5 – 13 m/min. (18 – 42 ft/min.) with automatic conveyor belt tracking and rubber drive roller Touch Screen Display and Control ECO Mode Automatic machine stop with advance warning function for energy saving during idle time of the machine. Head 1: R Head - Steel Profiled Contact Roller Sanding Unit This sanding head features a 140mm (5.5”) diameter profiled steel contact roller with automatic positioning of the contact roller upon selection with integrated grit compensation. The steel contact roller is ideal for calibration, providing optimal calibration sanding results: Features & Details: HOMAG SANDTEQ W-124 RC (continued) • 15.6" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature) • Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation • Contact Roller (Steel): 140 mm (5.5”) • Drive motor: 17.4 kW (23 hp) • Belt speed: 18 mps (59 fps) • Dust outlet size: 160 mm (6.5") Head 2: C-Head – Combination Head Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application: EPS Electro-Pneumatic Segmented Pad System (Head 2) This head is equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 35 mm pad resolu

53” capacity (1) drum head (1) combo head 230 volt 3 phase at lease (10) spare belts Available late July/early August 2023

Ironwood S135 MRK Wide Belt Sander Manufacturer specs: 52” Triple head wide belt sander. Head # 1 is a steel contact roller - 250 mm diameter profiled steel contact roller - Height adjustable contact roller with dial indicator for grit compensation - Thirty (30) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #2 is a rubber contact roller - 250 mm diameter 85 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Twenty (20) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #3 is a combination head - 140 mm diameter 65 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Height adjustable sanding pad - Twenty (20) horse power motor - Poly-v belt drive - Air jet belt cleaning - Cutting speed of 12 mps (40 fps) - Cutting direction against feed

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

Larick 220 is designed for use with flexible brush type sanding wheels. (2) counter rotating spindles with 1 HP motors 1" dia. x 6" arbors with 6" travel Variable speeds 100-1200 RPM 60" x 24" table 36" height...2" travel 220 volt single phase Less than 100 hours since purchased in February 2021

Lower Denibbing Sander

Loewer Discmaster 6TD Brush Sander Vacuum Bed

Oakley Edge Sander

Optisand L202 Moulding Sander