You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
53 Results Found for Sawmill Viewing 1 - 25 of 53 results
Call for Price
This facility has closed and all machinery is being removed. More information coming.
Equipment Location:NC
Call for Price
(2) 200HP motors 480V 3 phase Can chip a 12" face Max opening between heads is about 39" ASM can rebuild this particular chipping canter at your site as well for an additional cost
Equipment Location:NC
Call for Price
This facility has shut down and all eqipment is being removed. More information coming.
Equipment Location:NC
Call for Price
This facility has shut down and all equipment is being removed. More information coming.
Equipment Location:NC
Call for Price
(2) 200HP motors 480V 3 phase Can chip a 12" face Max opening between heads is about 39" Already disassembled and ready to load... Cants on 2 sides... Can do as small as a 4" cant ASM can rebuild this particular chipping canter at your site as well for an additional cost...
Equipment Location:NC
Call for Price
50HP motors (unbolted as this is heavy machinery) 5' box 3 head machine Hydraulic reservoir Oil cooler (3) knives per head Each head powered by 50HP motor 119.2/59.6 Amps 1770RPM Knife grinder included: sharpens blades of shaver The production rate on this machine should be around 50 cubic yards per hour.... This B&C Shaving mill is in working/running condition according to the seller and is ready to load! There are hydraulic units with this. There is a cylinder on the shaver infeed box that moves the box back and forth to help clear the blades and to keep the flow going. Great operation
Equipment Location:WI
Call for Price
Brewco Wolf Resaw 4" Blade; 20'4" Long 40" Bandwheels 40 HP Main Motor 10 HP Hydraulic Feed McDonough Style Guides Some spare blades Head moves up/down, not the bed Approximate dimensions: 9'L x 10'W x 6'H Also available separately: 8' Infeed Belt 16' Outfeed Rollcase
Equipment Location:GA
Call for Price
CAE Drum DEbarker Approx 80' long 8' Diameter Approx $50,000 in spare parts Bark conveyor Production: 100 Tons/hour, hard or softwood Dismantled and loaded on the truck. 5-6 trucks required.
Equipment Location:NC
Call for Price
200 HP Main Motor Cutters: 117 F-Cutters Screen: (4 ) 22" Diameter Wide with 1-1/2" Holes
Equipment Location:Monroe, IL
Call for Price
Tyrone Berry feed system with cooler Split belt with kickersto a Lane horizontal edger 50HP electric Feed deck with stop and load and log turner Outfeed green chain and cant flipper Large booth Saw Paw Sharpener with (2) extra blades Rens Metal detector Sawdust collection system All electical wiring included and starters and extra parts 134M Moulder 4 x 12" included Air system for sawdust that also serves the 4 sided moulder This full automatic modular mill is run with a 100KW GMC diesel generator with 200 gallon tank to a 125HP electric motor to the headsaw. The 125HP motor is step started and once it is running there is plenty of power for all accessories. This generator runs about 5 gallons per hour so it is cheap to run. The owner of this is selling to develop the land as this was a side business. This is ready to load
Equipment Location:MA
Call for Price
(2) Blades - Each has a 15HP motor Center split blades Blades each run by hydraulic so one can be fixed (stationary) and the other move or both stationary or both moveable Infeed rolls 5HP Outfeed conveyor (deck not included in photo) Hydraulic pack 10HP 28" width Max 4" thick cut This machine was purchased by the seller and never put into service.
Equipment Location:VA
Call for Price
This system was purchased and never put into production. Motors have been used on other machinery. Includes: Infeed & Outfeed
Equipment Location:NC
Call for Price
36" W x 10" D grinding head Indexable cutters Feed motor on vibration tray set up Vibrating conveyor included 60HP main motor Control box 3.6 total hours - yes this is correct, hardly any use at all The seller has confirmed that this Cresswood Destroyer Grinder is in great working/running condition. It is ready to load!
Equipment Location:ME
Call for Price
Mill is complete Log capacity: 36" x 16' Computer setworks 55' Track Stop end load log deck Chain log turner 20' Outfeed rolls (2) 30" Top saws (3) 56" Bottom Saws 125 HP Main drive Vertical edger with (3) blades and 50 HP Motor Approximately: 1200 to 1500ft per hour Approximately: 130-160 tie logs in an 8hr shift Nice computer setworks Only 25% wear on tracks Spare blades will be included This mill has been removed from service in June 2014 and is ready to load. The seller has confirmed that this is in good working/running condition and is ready to load. Was working fine according to seller when removed from service.
Equipment Location:KS
Call for Price
45" Short Log scragg mill 1st saw: Bottom arbor has (2) 34" blades on a 2 1/8” shaft 50HP motor Top arborhas (2) 18" blades on a 2' shaft 20HP motor Air activaated bottom saw Width setup for 4"-6" Carriage chain: with 3.5" pitch links consisting of dogs spaced at 10" 11" slab conveyor frame on both sides on a 6" belt 2HP motor 2nd saw: 28" blades on aa 2 1/8" 50HP motor Air activated saw dimensions: 4", 6" and 8" Saw line dimensions: 42'L x 40"H x 8'W 8" channel frame and 4" channel legs Max log diameter: 18" Max log length: 48" This was installed new into their facility in the early 80's.... The seller has confirmed tha this Evans Short Log scragg mill is in good working/running condition.
Equipment Location:NS
Call for Price
(2) 75 HP motors on (2) Circular Saws (2) 20 HP motors on (2) Band Saws 75 HP motor on hydraulic pack 24" Max log diameter Hydraulic feed Electrical Panel 48" blade diameter Minimum 12' from trough to blade
Equipment Location:OK
Call for Price
Infeed trough Slasher Chop Saw with hydraulic hold down Operator cab Debarker Outfeed Rolls This system is designed for 4'-6' logs. Have to confirm if it was made by Fastline.
Equipment Location:NY
Call for Price
18" Unit was removed from service about 2-years ago. Ready to load!
Equipment Location:SC
Call for Price
48" Horizontal Bottom discharge 125HP motor Rebuilt by Webby Fryer
Equipment Location:GA
Call for Price
Frick Circle Mill Meadows Log Turner Log Deck T/B 210 feed-Morbark Debarker (4) Strand log deck and bark conveyors Edmiston 2-saw Hydraulic Edger 40' roll case w/slab dump Fulgham Chipper Precision Chip Screen Phelps Chip Loader Fulgham Vibrating Conveyor Green Chain Complete Operation, still under power and in good condition, according to the seller.The owner was producing around 1,000ft per hour.They were cutting 4/4 oak lumber and then cutting a cant out of the heart.
Equipment Location:VA
Call for Price
Hydraulic Circle sawmill All steel Designed to saw up to 30' long This runs off of electric 3 phase This Frick Sawmill is ready to load. It may need to be oiled and greased but it is in working condition. The owner ran this with electric and a power unit. Power unit is not included.
Equipment Location:NC
Call for Price
Manufacturer specs (to be confirmed): Controls are operational Film Feed System Hot air sealer This system was purchased for a new line and never installed by the seller. Machine is designed for Mulch, Gravel, Soil, Sand or Rock.
Equipment Location:WI
Call for Price
IME 8' x 30" Box rebuilt box & tracks, wheels and bearings (2) 10" Heads with 8-rows of knives (2) 30 HP Motors 20 HP Hydraulic Pump w/ Cooler 50 Gallon Tank Second Mill: Davis 8' x 36" Box - Rebuilt box, tracks, wheels and bearing (2) 12" Heads with 10-rows of knives (2) 50 HP Motors 25 HP Hydraulic Pump w/ Cooler 50 Gallon Tank Seller is selling both mills in one sale. Both are under power and available for inspection.
Equipment Location:NY
Call for Price
(2) four knife heads 50HP motor 50HP hydraulic pack machine 3 Phase 4 Foot Can be converted over to PTO or gas if need be According to the seller, this Jackson Shaving Mill is in good condition and is just waiting for its new owner to come and pick it up...
Equipment Location:KY
Call for Price
This unit was removed from service about 6 months ago. Ready to load! Lamb Hammermill 100 HP Motor
Equipment Location:TN