#110 • 2018 Cleereman 3HB Carriage (1st of an entirety) SN: 38-1078-16, Model: 38, 110V over air controls, 7'6" x 14' overall dimensions, wheels 54" center to center, pantograph arms, Brownsville turners, track oiler

#200 • Cornell Single Arbor Edger-Gangsaw Model: E760, SN: E760-0016-97, 2 moving saws, 60" wide infeed, edger 28" wide, gangsaw 28" wide, 3 1/2" collars, 2" collars, 1 1/2" collars, 1 1/4" collars, side press roll on gang side, control box, no power, 6" x 16' tailing belt on edger side, 27" x 16' tailing belt on gang side

#115 • Helle 3 HB Modular Carriage (1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board

#100 • 2000 HMC V216 Rosserhead Debarker Model: V216. SN: 1740-00. Drive on the head: Electric. Head type: Steel. Width of head: 12". Debarker HP: 40hp electric. Chain drive: hydraulic power. Includes barn sweep: No. Pantograph: Cable. Cab: Yes, size: 4' x 4'. Controls: Yes, type: Pilot Joystick plus lever and foot petals. Features and Notes: Will be using till sale time, 14' outside of wheel, no support structure, slant track.

#2500 • Hood 24000 Knuckleboom SN: 243701. Meter reads: 3,503 hours. Engine: 6 cylinder Cummins. Fuel type: Diesel. Continuous Grapple: Yes, Rotobec 4642. Trailer: Yes. Delimber: No. Bucksaw Hookups: Yes. A/C: No. Heater: No. Tire size: 11R24.5. Features and Notes: Runs and operates. Contact Myron Nissley with any questions 574-536-2481

#200 • 2018 Komatsu WA200-8 Wheel Loader SN: 85539. Meter reads: 3,461 hours. Engine: Komatsu SAA4D107E-3. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 31" W, 17" T. Tire Size: 20.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates, side window has crack

#1401 • 2006 Volvo L60E Wheel Loader Serial No: L60EV61009. Meter reads: 7,615 hours. Engine: 6DZXL057033. Fuel type: Diesel. ROPS: Enclosed cab. 3rd Valve: No. Tire Size: 20.5R25. Attachments: None Heater: Yes. A/C: Yes, condition unknown. Quick Attach: Yes. 4-speed powershift transmission, 17,000 lbs lift capacity, Not Currently Running, But Does Run (see Video). Transmission currently out of machine and will need a new torque converter and transmission gone through and cleaned. Please call for a quote on having it repaired before it leaves the auction yard.Comes with repair manual on the transmission. Contact Myron Nissley with any questions 574-536-2481

#160 • Wood-Mizer HR120 Horizontal Resaw Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands

#1050 • 2016 Bobcat S630 Skid Steer SN: AHGL12647. Meter reads: 1,572 hours. Engine: Bobcat. HP: 74. Fuel type: Diesel. ROPS: Enclosed. 2 Speed: No. Highflow: No. Lift capacity: 2,180 lbs. Attachments: 72" bucket. A/C: Yes. Heater: Yes. Features and Notes: It has joystick controls, quick attach bucket, and auxiliary hydraulics. Low hours! Freshly painted and has new tires. Runs good. Contact Bronson with any questions 574-210-3721

#121 • Cornell Edger Gang Saw SN: HD4267035, SN: HD42670352-01, 21" edging capacity, 2 moving saws, 20" saws, only used as edge, 4' x 7' infeed table, 5" x 9' tailing belt with side drop, 2 laser lights, control box, hydraulic drive, support to ground

#115B • Detroit Diesel Series 60 Power Unit Meter reads: 9,810 hours. Control box in sawyer cab, electronic controlled, PEC clutch model CB3-14-A32X

#1954 • 2012 Freightliner Cascadia 113 Truck VIN #: 1FUJGBDV9CLBE7266. Mileage: 221 approx 623,000 on truck. Engine Type: Detroit DD13. Fuel Type: Diesel. Horsepower: 470. Transmission: 10 speed Eaton Fuller. GVWR: 80,000 lbs. AC/Heat: Yes. Wet kit: Yes. Features and Notes: Starts, runs, and drives like it should. Has dual line wet kit, tires are in good condition, new clutch, outframe overhaul last year, brakes are good, lights work, full diff locks, does have some scattered damages, check engine light is on. Has title. Contact Zak with any questions 260-221-2628

#127 • 2022 Helle Double End Trimsaw SN: 202062, 1 moving saw, computer set, hydraulic on saws, 24" x 25' scrap belt, 7" x 18' capacity, includes stairs and platform

#205 • 2013 John Deere 344J Wheel Loader SN: 1LV344JXCZB030560. Meter reads: 7,397 hours. Engine: JD 4045HT281. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 38" W 24" T. Tire Size: 17.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates. This item will be reserved for loadout until May 3rd.

#1001 • 2021 Kubota SVL75-2 Skid Steer SN: KBCZ052CLM1H60850. Meter reads: 852 hours. Engine: Kubota. HP: 74. Fuel type: Diesel. ROPS: Enclosed. Controls: Joystick. 2 Speed: Yes. Highflow: No. Quick attach: Manual. Lift capacity: 3,285 lbs. Attachments: 74" low profile bucket with bolt on cutting edge. A/C: Yes. Heater: Yes. Features and Notes: Low hours! Excellent operating condition! Clean and barely broke in! Contact Myron Nissley with any questions 574-536-2481

#1600 • Kubota SSV65 Skid Steer SN: 10803. Meter reads: 825 hours. Engine: Kubota V2607 2.6L. HP: 64. Fuel type: Diesel. ROPS: Open. Controls: Hand and foot. 2 Speed: Yes. Highflow: Yes. Lift capacity: 1,900 lbs. Attachments: 65" tooth bucket. Features and Notes: Manual quick attach, lights work. Runs and operates

#1351 • 2000 Master Craft MC-5675-00LW Forklift SN: 4954. Meter reads: 21 hours (not accurate). Engine: Perkins. Fuel type: Diesel. Load capacity: 5,000 lbs. Stage mast: 2. Side shift: No. Fork positioner: No. ROPS: Open. Tire size: (front) 19.5L-24 (rear) 11L-16SLF-3. Tires: Pneumatic. Features and Notes: Good running and operating forklift. Throttle does stick sometimes. Contact Bronson with any questions 574-210-3721

#136 • Morbark 48" Chip-Pak Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters

#134 • 2022 Morbark Mulch Hog Grinder SN: 562-059, model: HD30, 34" x 10' vibrating in feed driven from conveyor, hydraulic drive on feed roll, no power, control box, hydraulic pumps, hydraulic tank and hoses

#1000 • Toyota 7FGU30 Forklift SN: 60267. Meter reads: Unknown. Engine: Toyota. Fuel type: LP. Load capacity: 6,000 lbs. Stage mast: 3. Mast height: 90". Side shift: Yes. Fork positioner: No. ROPS: Open. Tire size: 28x9-15, 6.50-10. Tires: Solid. Features and Notes: Gauges not workin, park brake not working. Runs and operates.